EVALUATION OF ELECTRON BEAM WELDING OF ALLOYED MOLYBDENUM SHEET
Technical Report
·
OSTI ID:4819174
The results of a program conducted to evaluate the electron beam welding process as applied to alloyed molybdenum sheet are given. Both low and high voltage welding equipment were utilized in the study. This enabled comparison of results to see if either type of equipment had distinct advantages. Welded test panels were evaluated radiographically, metallographically, and mechanically. The tensile properties at temperatures up to 3200 deg F were obtained for both the welded specimens and parent material. Testing was conducted on uncoated specimens using a protectivc atmosphere. (auth)
- Research Organization:
- Marquardt Corp., Van Nuys, Calif.
- NSA Number:
- NSA-16-004517
- OSTI ID:
- 4819174
- Report Number(s):
- NP-11128; S-192
- Country of Publication:
- Country unknown/Code not available
- Language:
- English
Similar Records
ELECTRON BEAM WELDING OF TUNGSTEN AND MOLYBDENUM
INVESTIGATION OF PROBLEMS ASSOCIATED WITH THE USE OF ALLOYED MOLYBDENUM SHEET IN STRUCTURES AT ELEVATED TEMPERATURES
PROPERTIES OF FLASH WELDED MOLYBDENUM
Technical Report
·
Fri Sep 01 00:00:00 EDT 1961
·
OSTI ID:4798332
INVESTIGATION OF PROBLEMS ASSOCIATED WITH THE USE OF ALLOYED MOLYBDENUM SHEET IN STRUCTURES AT ELEVATED TEMPERATURES
Technical Report
·
Sat Oct 01 00:00:00 EDT 1960
·
OSTI ID:4139242
PROPERTIES OF FLASH WELDED MOLYBDENUM
Technical Report
·
Thu Feb 16 23:00:00 EST 1961
·
OSTI ID:4818977