MACHINING OF REFRACTORY MATERIALS. Phase II Technical Engineering Report, May 1, 1962-July 31, 1962
Technical Report
·
OSTI ID:4783040
Machining studies were performed on pressed and sintered, forged and resintered, and arc cast unalloyed tungsten; D-31 niobium, 90Ta-10W alloy; silica reinforced phenolic resin; solid zirconium oxide; and zirconium and aluminum oxide coatings. The investigation consisted of face milling, end milling, drilling and tapping studies on tungsten and D-31 niobium; turning, face milling, drilling and tapping on silica reinforced phenolic resin; grinding of solid and flame sprayed zirconium and aluminum oxide coatings; and turning, face milling, end milling, drilling, reaming, tapping, and grinding on the 90Ta-10W alloy. (auth)
- Research Organization:
- Metcut Research Associates Inc., Cincinnati
- NSA Number:
- NSA-16-030742
- OSTI ID:
- 4783040
- Report Number(s):
- ASD-TR-7-532a(VII)
- Country of Publication:
- United States
- Language:
- English
Similar Records
MACHINING OF REFRACTORY MATERIALS. Phase II Technical Engineering Report, February 1, 1962 to April 30, 1962
MACHINING OF REFRACTORY MATERIALS. PHASE II. Technical Engineering Report, November 1, 1961 to January 31, 1962
MACHINING OF REFRACTORY MATERIALS. Phase II Technical Engineering Report, May 1, 1961-July 31, 1961
Technical Report
·
Tue May 01 00:00:00 EDT 1962
·
OSTI ID:4828513
MACHINING OF REFRACTORY MATERIALS. PHASE II. Technical Engineering Report, November 1, 1961 to January 31, 1962
Technical Report
·
Wed Jan 31 23:00:00 EST 1962
·
OSTI ID:4810117
MACHINING OF REFRACTORY MATERIALS. Phase II Technical Engineering Report, May 1, 1961-July 31, 1961
Technical Report
·
Tue Aug 01 00:00:00 EDT 1961
·
OSTI ID:4837203