Standard specification for Ni--Cr--Fe--Nb--Mo--W alloy plate, sheet, and strip

Book · Mon Jan 01 04:00:00 EST 1973

OSTI ID:4363654

The chemical requirements specify a Ni-base alloy with 14.0 to 16.0% Cr, 2.75 to 3.25% Nb + Ta, 2.75 to 3.25% Mo, 2.75 to 3.25% W, and 5 to 9% Fe. Also specified is Al 0.3 to 0.8%, Ti 0.4 to 0.7%, Mn 0.75% max., Si 0.40% max., C 0.08% max., Mg 0.01 to 0.05%, B 0.003 to 0.008%, Zr 0.01 to 0.05%, P 0.01% max., and S 0.01% max. The product forms may be furnished in one of the following conditions: (1) annealed, (2) solution treated (cold-worked material only, or (3) deep drawing and spinning quality (coldworked material only). (LMT)

• Research Organization: Originating Research Org. not identified
• NSA Number: NSA-29-018935
• OSTI ID: 4363654
• Report Number(s): ASTM-B--519-70
• Country of Publication: Country unknown/Code not available
• Language: English

Related Subjects

*CHROMIUM ALLOYS-- SPECIFICATIONS
*IRON ALLOYS-- SPECIFICATIONS
*MOLYBDENUM ALLOYS-- SPECIFICATIONS
*NICKEL BASE ALLOYS-- SPECIFICATIONS
*NIOBIUM ALLOYS-- SPECIFICATIONS
*TUNGSTEN ALLOYS-- SPECIFICATIONS
CHEMICAL COMPOSITION
INSPECTION
MECHANICAL PROPERTIES
N50230* --Metals
Ceramics
& Other Materials--Metals & Alloys--Properties
Structure & Phase Studies
PLATES
SHEETS
STANDARDS
TESTING STANDARDS