The fabrication of a vanadium-stainless steel test section for MHD testing of insulator coatings in flowing lithium
Conference
·
OSTI ID:435085
- Argonne National Lab., IL (United States)
- McDonnell Douglas Aerospace, St. Louis, MO (United States). High Energy Systems
- General Atomics, San Diego, CA (United States)
- Century Tubes, Inc., San Diego, CA (United States)
To test the magnetohydrodynamic (MHD) pressure drop reduction performance of candidate insulator coatings for the ITER Vanadium/Lithium Breeding Blanket, a test section comprised of a V- 4Cr-4Ti liner inside a stainless steel pipe was designed and fabricated. Theoretically, the MHD pressure drop reduction benefit resulting, from an electrically insulating coating on a vanadium- lined pipe is identical to the benefit derived from an insulated pipe fabricated of vanadium alone. A duplex test section design consisting of a V alloy liner encased in a SS pressure boundary provided protection for vanadium from atmospheric contamination during operation at high temperature and obviated any potential problems with vanadium welding while also minimizing the amount of V alloy material required. From the MHD and insulator coating- point of view, the test section outer SS wall and inner V alloy liner can be modeled simply as a wall having a sandwich construction. Two 52.3 mm OD x 2.9 m long V-alloy tubes were fabricated by Century Tubes from 64 mm x 200 mm x 1245 mm extrusions produced by Teledyne Wah Chang. The test section`s duplex structure was subsequently fabricated at Century Tubes by drawing down a SS pipe (2 inch schedule 10) over one of the 53.2 mm diameter V tubes.
- Research Organization:
- Argonne National Lab., IL (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research, Washington, DC (United States)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 435085
- Report Number(s):
- ANL/TD/CP--89123; CONF-960646--2; ON: DE97000989
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fabrication of a vanadium-stainless steel test section for MHD testing of insulator coatings in flowing lithium
Results of R and D for lithium/vanadium breeding blanket design
Procurement of V-Cr-Ti alloys to study minor variations on V-4Cr-4Ti
Journal Article
·
Mon Dec 30 23:00:00 EST 1996
· Fusion Technology
·
OSTI ID:447345
Results of R and D for lithium/vanadium breeding blanket design
Conference
·
Mon Mar 31 23:00:00 EST 1997
·
OSTI ID:510421
Procurement of V-Cr-Ti alloys to study minor variations on V-4Cr-4Ti
Technical Report
·
Sat Feb 28 23:00:00 EST 1998
·
OSTI ID:335381