Electrolytic decontamination of conductive materials for hazardous waste management
Electrolytic removal of plutonium and americium from stainless steel and uranium surfaces has been demonstrated. Preliminary experiments were performed on the electrochemically based decontamination of type 304L stainless steel in sodium nitrate solutions to better understand the metal removal effects of varying cur-rent density, pH, and nitrate concentration parameters. Material removal rates and changes in surface morphology under these varying conditions are reported. Experimental results indicate that an electropolishing step before contamination removes surface roughness, thereby simplifying later electrolytic decontamination. Sodium nitrate based electrolytic decontamination produced the most uniform stripping of material at low to intermediate pH and at sodium nitrate concentrations of 200 g L{sup -1} and higher. Stirring was also observed to increase the uniformity of the stripping process.
- Research Organization:
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 431165
- Report Number(s):
- LA-UR-96-3795; CONF-9509139-11; ON: DE97002348; TRN: 97:003213
- Resource Relation:
- Conference: 7. ACS special symposium: emerging technologies in hazardous waste management, Atlanta, GA (United States), 17-20 Sep 1995; Other Information: PBD: 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Electrodissolution studies of 304 stainless steel in sodium nitrate electrolyte
Electrolytic decontamination of the 3013 inner can