Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Bulk and mechanical properties of the Paintbrush tuff recovered from boreholes UE25 NRG-4 and -5: Data report

Technical Report ·
DOI:https://doi.org/10.2172/418390· OSTI ID:418390
; ;  [1];  [2]
  1. New England Research, Inc., White River Junction, VT (United States)
  2. Sandia National Labs., Albuquerque, NM (United States)

Experimental results are presented for bulk and mechanical properties measurements on specimens of the Paintbrush tuff recovered from boreholes UE25 NRG-4 and -5, at Yucca Mountain, Nevada. Measurements have been performed on three thermal/mechanical units, PTn, TSwl, and TSw2. On each specimen the following bulk properties have been reported: dry bulk density, saturated bulk density, average grain density, and porosity. Unconfined compression to failure, confined compression to failure, and indirect tensile strength tests were performed on selected specimens recovered from the boreholes. In addition, compressional and shear wave velocities were measured on specimens designated for unconfined compression and confined compression experiments. Measurements were conducted at room temperature on nominally water-saturated specimens. The nominal rate for the fracture experiments was 10{sup -5}s{sup -1}.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
USDOE Office of Civilian Radioactive Waste Management, Washington, DC (United States)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
418390
Report Number(s):
SAND--94-2138; ON: DE97000871
Country of Publication:
United States
Language:
English