skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: ROUGHENING OF HEAT TRANSFER SURFACES AS A METHOD OF INCREASING HEAT FLUX AT BURNOUT

Technical Report ·
DOI:https://doi.org/10.2172/4017145· OSTI ID:4017145

The bunnout heat flux and friction factors for rough surfaces were measured for vertical tubes cooled by downward flow of water. An increase in the burnout heat flux of as much as l00% over a smooth surface was obtained at the same coolant velocity, temperature, and pressure. A nat gain of as much as 80% in heat flux at burnout is possible if the coolant channel is widened to permit the same flow at the same pumping requirements as a smooth surface. The results of 50 experiments were correlated empirically, and may be expressed by an equation. (auth)

Research Organization:
Du Pont de Nemours (E.I.) & Co. Savannah River Lab., Aiken, S.C.
Sponsoring Organization:
USDOE
NSA Number:
NSA-15-018183
OSTI ID:
4017145
Report Number(s):
DPST-60-284
Resource Relation:
Other Information: Orig. Receipt Date: 31-DEC-61
Country of Publication:
United States
Language:
English