FLOW RESISTANCE AND HEAT TRANSFER IN RING SLOTS WITH ROUGH NUCLEAR TUBES (in German)
Journal Article
·
· Atomkernenergie (West Germany) Merged with Kerntechnik to form Atomkernenerg./Kerntech. Acta Radiol. Changed to Acta Radiol.: Oncol., Radiat. Phys.
OSTI ID:4002558
Pressure drop and heat transfer in annular tubes were measured. The surface of the inner tube was artificially roughened. The investigation covered a range of Reynolds numbers from 200 to 100,000. The maximum heat flux, directed from the inner tube to the fluid, was about 316 w/cm>s2/sup / 2.7 x 10>s6/sup / al/m>s2/sup h/The heat transfer medium was water. The hydraulic diameter of the annular tube served as characteristic length in the dimensionless Reynolds and Nusselt number. The results of all experiments are presented in graphical form. Heat transfer and pressure drop increase with the degree of roughness and depend on the type and arrangement of the roughness elements chosen. (auth)
- Research Organization:
- Forschungsinstitut der Mannesmann AG, Duisburg, Ger.
- NSA Number:
- NSA-15-019518
- OSTI ID:
- 4002558
- Journal Information:
- Atomkernenergie (West Germany) Merged with Kerntechnik to form Atomkernenerg./Kerntech. Acta Radiol. Changed to Acta Radiol.: Oncol., Radiat. Phys., Journal Name: Atomkernenergie (West Germany) Merged with Kerntechnik to form Atomkernenerg./Kerntech. Acta Radiol. Changed to Acta Radiol.: Oncol., Radiat. Phys. Vol. Vol: 6; ISSN ATKEA
- Country of Publication:
- Country unknown/Code not available
- Language:
- German
Similar Records
FLOW RESISTANCE AND HEAT TRANSFER IN ANNULAR FISSIONS WITH ROUGH NUCLEAR TUBES
Laboratory investigation and commercial test for rotors-assembled strand applied in smooth tube
Validated heat-transfer and pressure-drop prediction methods based on the discrete-element method: Phase 2, two-dimensional rib roughness
Journal Article
·
Fri Sep 01 00:00:00 EDT 1961
· Kerntechnik (West Germany) Merged with Atomkernenergie to form Atomkernenerg./Kerntech.kyu Hokoku
·
OSTI ID:4823864
Laboratory investigation and commercial test for rotors-assembled strand applied in smooth tube
Journal Article
·
Wed Oct 15 00:00:00 EDT 2008
· Experimental Thermal and Fluid Science
·
OSTI ID:21116083
Validated heat-transfer and pressure-drop prediction methods based on the discrete-element method: Phase 2, two-dimensional rib roughness
Technical Report
·
Sat May 01 00:00:00 EDT 1993
·
OSTI ID:10192770