Investigation on carburizing duplex-microstructures of martensite-bainite, their properties of 430 D2 steel and the application of carburizing and austempering to self-tapping screw dies
Conference
·
OSTI ID:389772
- Univ. of Science and Engineering, Tianjin (China)
By carburizing, the composition of the case has been greatly changed for 430 D2 steel. The microstructures and properties acquired by the case depends upon the cooling process. This paper deals with comparing the oil quenched structures with the austempered structures of the carburized case. The compared aspects also covered the substructures, relative quantities of several structures, mechanical properties and type of fracture topography. In addition, according to fracture mechanics and the characteristics of fatigue failure of the self-tapping screw dies, how the duplex microstructure of martensite and bainite limited the initiation and propagation of fatigue cracks has been discussed.
- OSTI ID:
- 389772
- Report Number(s):
- CONF-951222-; ISBN 0-87170-561-3; TRN: IM9646%%57
- Resource Relation:
- Conference: International conference on carburizing and nitriding with atmospheres, Cleveland, OH (United States), 6-8 Dec 1995; Other Information: PBD: 1995; Related Information: Is Part Of 1995 Carburizing and nitriding with atmospheres: Conference proceedings; Grosch, J. [ed.] [Technical Univ. of Berlin (Germany)]; Morral, J. [ed.] [Univ. of Connecticut, Storrs, CT (United States)]; Schneider, M. [ed.] [Timken Co., Inc., Canton, OH (United States)]; PB: 403 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Study on the morphology and properties of carburized and austempered microstructures in 430 D2 steel
On the fatigue crack growth resistance of upper bainite-martensite in an AISI 4330 steel
Effect of holding time in the ({alpha} + {gamma}) temperature range on toughness of specially austempered ductile iron
Book
·
Sun Dec 31 00:00:00 EST 1995
·
OSTI ID:389772
+2 more
On the fatigue crack growth resistance of upper bainite-martensite in an AISI 4330 steel
Journal Article
·
Sat May 15 00:00:00 EDT 1993
· Scripta Metallurgica et Materialia; (United States)
·
OSTI ID:389772
+1 more
Effect of holding time in the ({alpha} + {gamma}) temperature range on toughness of specially austempered ductile iron
Journal Article
·
Mon Jul 01 00:00:00 EDT 1996
· Metallurgical Transactions, A
·
OSTI ID:389772
Related Subjects
36 MATERIALS SCIENCE
42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES
STEELS
CARBURIZATION
TEMPERING
MICROSTRUCTURE
FRACTURE PROPERTIES
DIES
SURFACE TREATMENTS
HEAT TREATMENTS
MORPHOLOGY
BENDING
FRACTURES
TRANSMISSION ELECTRON MICROSCOPY
X-RAY DIFFRACTION
DISLOCATIONS
SCANNING ELECTRON MICROSCOPY
AUSTENITE
MICROHARDNESS
CRACK PROPAGATION
SERVICE LIFE
42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES
STEELS
CARBURIZATION
TEMPERING
MICROSTRUCTURE
FRACTURE PROPERTIES
DIES
SURFACE TREATMENTS
HEAT TREATMENTS
MORPHOLOGY
BENDING
FRACTURES
TRANSMISSION ELECTRON MICROSCOPY
X-RAY DIFFRACTION
DISLOCATIONS
SCANNING ELECTRON MICROSCOPY
AUSTENITE
MICROHARDNESS
CRACK PROPAGATION
SERVICE LIFE