Gated charged-particle trap
The design and operation of a new type of charged-particle trap provides simultaneous measurements of mass, charge, and velocity of large electrospray ions. The trap consists of a detector tube mounted between two sets of center-bored trapping plates. Voltages applied to the trapping plates define symmetrically-opposing potential valleys which guide axially-injected ions to cycle back and forth through the charge-detection tube. A low noise charge-sensitive amplifier, connected to the tube, reproduces the image charge of individual ions as they pass through the detector tube. Ion mass is calculated from measurement of ion charge and velocity following each passage through the detector. 5 figs.
- Research Organization:
- University of California
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC03-76SF00098
- Assignee:
- Univ. of California, Oakland, CA (United States)
- Patent Number(s):
- US 5,880,466/A/
- Application Number:
- PAN: 8-869,282
- OSTI ID:
- 335501
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development of a gated electrostatic ion trap for recirculating ions through a charge detection tube
Four pin mounting system for nuclear reactor control rod guide tubes