Generation and characterization of atmospheric plasma torch array
- Polytechnic Univ., Farmingdale, NY (United States)
Using a capacitively coupled electrical discharge, an array of plasma torches can be produced simultaneously by using a common 60 cycle power source (i.e. a simple wall plug) at atmospheric pressure. The size of each torch depends on the geometry of the electrode pair and the streaming speed of the air flow. Such a flat panel plasma torch array can be made into the desired volume and plasma density. A laser beam is used to measure the dimensions of the torch. It is found that each torch has a radius of about 1 cm and a height of about 6.5 cm. Surprisingly, it is shown that the torch can cause up to 80% modulation of the laser beam intensity. From the voltage and current measurements, the average power consumption of each torch is estimated to be 0.6 kW. The electron density can also be estimated and is found to exceed 10{sup 13}cm{sup {minus}3}. The discharge may be represented by a lump circuit. Thus, a computer simulation of the discharge is performed. The results are found to be in good agreement with experimental measurements. Simulations have also been performed to study the dependence of average electron density, with the electron-ion recombination coefficient as a parameter. The study is aimed at developing an efficient large volume dense plasma for industrial applications.
- OSTI ID:
- 330587
- Report Number(s):
- CONF-970559-; TRN: IM9915%%103
- Resource Relation:
- Conference: 24. IEEE international conference on plasma science, San Diego, CA (United States), 19-23 May 1997; Other Information: PBD: 1997; Related Information: Is Part Of IEEE conference record -- Abstracts; PB: 354 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Ions Beams and Ferroelectric Plasma Sources
Spectroscopic diagnostics and modeling of Ar/H{sub 2}/CH{sub 4} microwave discharges used for nanocrystalline diamond deposition