Multi-step wrought processing of TiAl-based alloys
Wrought processing will likely be needed for fabrication of a variety of TiAl-based alloy structural components. Laboratory and development work has usually relied on one-step forging to produce test material. Attempts to scale-up TiAl-based alloy processing has indicated that multi-step wrought processing is necessary. The purpose of this study was to examine potential multi-step processing routes, such as two-step isothermal forging and extrusion + isothermal forging. The effects of processing (I/M versus P/M), intermediate recrystallization heat treatments and processing route on the tensile and creep properties of Ti-48Al-2Nb-2Cr alloys were examined. The results of the testing were then compared to samples from the same heats of materials processed by one-step routes. Finally, by evaluating the effect of processing on microstructure and properties, optimized and potentially lower cost processing routes could be identified.
- Research Organization:
- Knolls Atomic Power Lab., Schenectady, NY (United States)
- Sponsoring Organization:
- USDOE Assistant Secretary for Nuclear Energy, Washington, DC (United States)
- DOE Contract Number:
- AC12-76SN00052
- OSTI ID:
- 319830
- Report Number(s):
- KAPL-P--000166; K--97049; CONF-970455--; ON: DE99001891
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of processing on the microstructure and tensile properties of a {gamma}-TiAl based alloy
Microstructure and mechanical properties of wrought near-{gamma} TiAl alloys