LDRD poster - Identifying the speciation of salt-based actinides in the presence of contaminants
S&T Accomplishment Report
·
OSTI ID:3023803
- Idaho National Laboratory
Molten salt reactors (MSRs) are among the most promising Generation IV nuclear reactors. The salts used in these reactors exhibit a high affinity for moisture and oxygen, and heating does not eliminate the oxides that are formed. Additionally, due to the high operating temperatures, reactor parts experience pronounced corrosion, and the resulting corrosion products integrate into the fuel salt system. It is hypothesized that the speciation of f-elements in molten salts would change in the presence of oxides and corrosion products. These changes in local structure can alter the rheological properties, which are critical to the operational and safety parameters of the reactors. Therefore, an in-depth understanding of how corrosion products influence lanthanide/actinide speciation is crucial. To test this hypothesis, lanthanides (as surrogates for actinides) and actinide chlorides were mixed with oxides (such as nickel oxide and lithium oxide) and/or corrosion products (e.g., nickel chloride) and reacted in molten salts. The resulting phases were analyzed using techniques such as powder X-ray diffraction, Raman spectroscopy, UV-Visible spectroscopy, and nuclear magnetic resonance spectroscopy. In the presence of oxides, due to the high oxophilicity of f-elements, these elements capture oxygen from the oxides, forming lanthanide/actinide oxide or oxychloride phases. Specifically, with cerium chloride, the introduction of lithium oxide to the formation of various final products depending on the oxide concentration. At lower oxide concentrations, cerium oxychloride (CeOCl) in the +3 oxidation state was observed, while an increase in the oxide concentration led to the formation of cerium dioxide (CeO2), where cerium is in the +4 oxidation state. In contrast, with nickel oxide, CeOCl formation was consistently observed, regardless of the oxide concentration. This project successfully determined that the speciation of f-elements change in the presence of oxides and different oxides in molten salts result in different final products. When the influence of nickel chloride was examined, changes in f-element speciation were not observed. However, it reacted with lithium chloride to generate a lithium-nickel-chloride (Li6NiCl8) phase, which was also observed when nickel oxide was reacted. Computational models were developed to simulate the phases anticipated under experimental conditions.
- Research Organization:
- Idaho National Laboratory (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE Office of Nuclear Energy (NE); USDOE Office of Nuclear Energy (NE)
- DOE Contract Number:
- AC07-05ID14517;
- OSTI ID:
- 3023803
- Report Number(s):
- INL/MIS-24-80707
- Country of Publication:
- United States
- Language:
- English
Similar Records
On-line monitoring combined with spectroelectrochemistry for the characterization of uranium and fission products within molten salt environments
Effect and measurement of residual water in CaCl2 intended for use as electrolyte in molten salt electrochemical processing
Exploring the speciation of actinide salts in the presence of contaminants related to molten salt reactors
Conference
·
Thu Jan 02 23:00:00 EST 2020
·
OSTI ID:1606192
Effect and measurement of residual water in CaCl2 intended for use as electrolyte in molten salt electrochemical processing
Journal Article
·
Fri Oct 09 20:00:00 EDT 2020
· Journal of Radioanalytical and Nuclear Chemistry
·
OSTI ID:1893659
Exploring the speciation of actinide salts in the presence of contaminants related to molten salt reactors
Conference
·
Mon Jun 05 20:00:00 EDT 2023
·
OSTI ID:3025257