Exact solution of burst pressure for thick-walled pipes using the flow theory of plasticity

Zhu, Xian-Kui

doi:10.1016/j.ijmecsci.2023.108582

Exact solution of burst pressure for thick-walled pipes using the flow theory of plasticity

Journal Article · Sun Jul 02 00:00:00 EDT 2023 · International Journal of Mechanical Sciences

DOI:https://doi.org/10.1016/j.ijmecsci.2023.108582· OSTI ID:2998188

^[1]

Savannah River National Laboratory (SRNL), Aiken, SC (United States)

This paper develops an exact solution of burst pressure for defect-free, thick-walled pipes using the flow theory of plasticity in terms of the average shear stress yield criterion (or Zhu-Leis yield criterion). The pipe steel is assumed to obey the power-law strain hardening rule, and large plastic deformation is described by the finite strain theory. On this basis, internal pressure is obtained as a power series function of the effective strains on the inside and outside surfaces of the thick-walled pipe with use of the second Bernoulli numbers. At burst failure, the Zhu-Leis flow solution of burst pressure is determined as a power series solution, and the burst effective strains, the burst effective stresses, and the burst pressure are functions of the diameter ratio (D_o / D_i), strain hardening exponent (n), and ultimate tensile strength (UTS). Similarly, the Tresca and von Mises flow solutions of burst pressure are also determined as a power series solution in terms of the Tresca and von Mises yield criteria. A general closed-from exact solution of burst pressure is then proposed for the three yield criteria, and the results showed that the proposed exact solution matches well with the power series solution for each yield criterion. Moreover, the von Mises flow solution is an upper bound prediction, the Tresca flow solution is a lower bound prediction, and the Zhu-Leis flow solution is an intermediate prediction that agrees well with the finite element analysis results of burst pressure for thick-walled pipes. Furthermore, two datasets of full-scale burst tests are then utilized to evaluate and validate the proposed flow solutions of burst pressure for both thin and thick-walled pipes.

View Accepted Manuscript (DOE)

Research Organization:: Savannah River National Laboratory (SRNL), Aiken, SC (United States)

Sponsoring Organization:: USDOE Laboratory Directed Research and Development (LDRD) Program; USDOE Office of Environmental Management (EM)

Grant/Contract Number:: 89303321CEM000080

OSTI ID:: 2998188

Alternate ID(s):: OSTI ID: 2000174

Report Number(s):: SRNL--STI-2023-00400

Journal Information:: International Journal of Mechanical Sciences, Journal Name: International Journal of Mechanical Sciences Vol. 259; ISSN 0020-7403

Publisher:: Elsevier BVCopyright Statement

Country of Publication:: United States

Language:: English

References (31)

Probabilistic Failure Prediction of High Strength Steel Rocket Motor Cases Krishnaveni, A.; Christopher, T.; Jeyakumar, K. Journal of Failure Analysis and Prevention, Vol. 14, Issue 4 https://doi.org/10.1007/s11668-014-9829-z	journal	May 2014
Tensile instability of thin-walled cylinders of finite length Weil, N. A. International Journal of Mechanical Sciences, Vol. 5, Issue 6 https://doi.org/10.1016/0020-7403(63)90031-6	journal	December 1963
Tensile plastic instability of thin tubes—I Hillier, M. J. International Journal of Mechanical Sciences, Vol. 7, Issue 8 https://doi.org/10.1016/0020-7403(65)90010-X	journal	August 1965
An estimation of maximum pressure for a thick-walled tube subjected to internal pressure Hamada, M.; Yokoyama, R.; Kitagawa, H. International Journal of Pressure Vessels and Piping, Vol. 22, Issue 4 https://doi.org/10.1016/0308-0161(86)90009-8	journal	January 1986
A comparative study on failure pressure estimations of unflawed cylindrical vessels Christopher, T.; Rama Sarma, B. S. V.; Govindan Potti, P. K. International Journal of Pressure Vessels and Piping, Vol. 79, Issue 1 https://doi.org/10.1016/S0308-0161(01)00126-0	journal	January 2002
Validation of the NG-18 equations for thick walled pipelines Lyons, C. J.; Race, J. M.; Chang, E. Engineering Failure Analysis, Vol. 112 https://doi.org/10.1016/j.engfailanal.2020.104494	journal	May 2020
Investigation on the calculation model of burst pressure for tube and casing under practical service environment Kuanhai, Deng; Yuanhua, Lin; Bing, Li International Journal of Hydrogen Energy, Vol. 44, Issue 41 https://doi.org/10.1016/j.ijhydene.2019.06.205	journal	August 2019
Plastic collapse analysis of thin-walled pipes based on unified yield criterion Wang, Lizhong; Zhang, Yongqiang International Journal of Mechanical Sciences, Vol. 53, Issue 5 https://doi.org/10.1016/j.ijmecsci.2011.02.004	journal	May 2011
Burst pressure models for thin-walled pipe elbows Wang, Qingguo; Zhou, Wenxing International Journal of Mechanical Sciences, Vol. 159 https://doi.org/10.1016/j.ijmecsci.2019.05.027	journal	August 2019
Average shear stress yield criterion and its application to plastic collapse analysis of pipelines Zhu, Xian-Kui; Leis, Brian N. International Journal of Pressure Vessels and Piping, Vol. 83, Issue 9 https://doi.org/10.1016/j.ijpvp.2006.06.001	journal	September 2006
Prediction of failure strain and burst pressure in high yield-to-tensile strength ratio linepipe Law, M.; Bowie, G. International Journal of Pressure Vessels and Piping, Vol. 84, Issue 8 https://doi.org/10.1016/j.ijpvp.2007.04.002	journal	August 2007
Evaluation of burst pressure prediction models for line pipes Zhu, Xian-Kui; Leis, Brian N. International Journal of Pressure Vessels and Piping, Vol. 89 https://doi.org/10.1016/j.ijpvp.2011.09.007	journal	January 2012
Burst pressures of thin-walled cylinders constructed of steel exhibiting a yield plateau Wang, Haifeng; Zheng, Tiancheng; Sang, Zhifu International Journal of Pressure Vessels and Piping, Vol. 193 https://doi.org/10.1016/j.ijpvp.2021.104483	journal	October 2021
Effect of autofrettage on the ultimate behavior of thick cylindrical pressure vessels Mohan, A.; Julyes Jaisingh, S.; Goldin Priscilla, C. P. International Journal of Pressure Vessels and Piping, Vol. 194 https://doi.org/10.1016/j.ijpvp.2021.104546	journal	December 2021
Analysis of the impact factor of burst capacity models for defect-free pipelines Sun, Mingming; Chen, Yanfei; Zhao, Haisheng International Journal of Pressure Vessels and Piping, Vol. 200 https://doi.org/10.1016/j.ijpvp.2022.104805	journal	December 2022
A parametric finite element study for determining burst strength of thin and thick-walled pressure vessels Johnson, William R.; Zhu, Xian-Kui; Sindelar, Robert International Journal of Pressure Vessels and Piping, Vol. 204 https://doi.org/10.1016/j.ijpvp.2023.104968	journal	August 2023
A comparative study of burst failure models for assessing remaining strength of corroded pipelines Zhu, Xian-Kui Journal of Pipeline Science and Engineering, Vol. 1, Issue 1 https://doi.org/10.1016/j.jpse.2021.01.008	journal	March 2021
Investigation of Burst Pressures in PWR Primary Pressure Boundary Components Namgung, Ihn; Giang, Nguyen Hoang Nuclear Engineering and Technology, Vol. 48, Issue 1 https://doi.org/10.1016/j.net.2015.11.001	journal	February 2016
A new methodology for the prediction of burst pressure for API 5L X grade flawless pipelines Oh, Do Han; Race, Julia; Oterkus, Selda Ocean Engineering, Vol. 212 https://doi.org/10.1016/j.oceaneng.2020.107602	journal	September 2020
Finite Element Prediction of Static Burst Pressure in Closed Thick- walled Unflawed Cylinders of Different Diameter Ratios Kadam, Mahesh; Murugan, G. Bala; Bujurke, Aditya A. Procedia Engineering, Vol. 173 https://doi.org/10.1016/j.proeng.2016.12.102	journal	January 2017
Dynamic burst pressure analysis of cylindrical shells based on average shear stress yield criterion Chen, Zhanfeng; Li, Xuyao; Wang, Wen Thin-Walled Structures, Vol. 148 https://doi.org/10.1016/j.tws.2019.106498	journal	March 2020
The Plastic Flow of Thick-Walled Tubes with Large Strains MacGregor, C. W.; Coffin, L. F.; Fisher, J. C. Journal of Applied Physics, Vol. 19, Issue 3 https://doi.org/10.1063/1.1715060	journal	March 1948
Influence of Yield-to-Tensile Strength Ratio on Failure Assessment of Corroded Pipelines Zhu, Xian-Kui; Leis, Brian N. Journal of Pressure Vessel Technology, Vol. 127, Issue 4 https://doi.org/10.1115/1.2042481	journal	June 2005
Strength of Thick-Walled Cylindrical Pressure Vessels Marin, Joseph; Weng, Tu-Lung Journal of Engineering for Industry, Vol. 85, Issue 4 https://doi.org/10.1115/1.3669909	journal	November 1963
Failure Pressure in Corroded Pipelines Based on Equivalent Solutions for Undamaged Pipe Bony, M.; Alamilla, J. L.; Vai, R. Journal of Pressure Vessel Technology, Vol. 132, Issue 5 https://doi.org/10.1115/1.4001801	journal	August 2010
The Bursting Pressure of Cylindrical and Spherical Vessels Svensson, N. L. Journal of Applied Mechanics, Vol. 25, Issue 1 https://doi.org/10.1115/1.4011694	journal	March 1958
Strength Criteria Versus Plastic Flow Criteria Used in Pressure Vessel Design and Analysis1 Zhu, Xian-Kui Journal of Pressure Vessel Technology, Vol. 138, Issue 4 https://doi.org/10.1115/1.4031284	journal	April 2016
Burst Pressure Solutions of Thin and Thick-Walled Cylindrical Vessels Zhu, Xian-Kui; Wiersma, Bruce; Johnson, William R. Journal of Pressure Vessel Technology, Vol. 145, Issue 4 https://doi.org/10.1115/1.4062334	journal	May 2023
Behaviour of Thick-Walled Steel Cylinders Subjected to Internal Pressure Crossland, B.; Bones, J. A. Proceedings of the Institution of Mechanical Engineers, Vol. 172, Issue 1 https://doi.org/10.1243/PIME_PROC_1958_172_061_02	journal	June 1958
Estimation of Burst Pressure of PVC Pipe Using Average Shear Stress Yield Criterion: Experimental and Numerical Studies Yang, Jinhui; Hu, Shaowei Applied Sciences, Vol. 11, Issue 21 https://doi.org/10.3390/app112110477	journal	November 2021
Recent Advances in Corrosion Assessment Models for Buried Transmission Pipelines Zhu, Xian-Kui CivilEng, Vol. 4, Issue 2 https://doi.org/10.3390/civileng4020023	journal	April 2023

Similar Records

Exact solutions of burst pressure for thick-walled cylinders in power-law strain hardening steels

Journal Article · Mon Sep 04 20:00:00 EDT 2023 · International Journal of Pressure Vessels and Piping · OSTI ID:2570434

Burst Pressure Solutions of Thin and Thick-Walled Cylindrical Vessels

Journal Article · Wed May 03 20:00:00 EDT 2023 · Journal of Pressure Vessel Technology · OSTI ID:1984656

EXPERIMENTAL VALIDATION OF THEORETICAL BURST STRENGTH SOLUTION FOR DEFECT-FREE THICK-WALLED PIPES

Conference · Tue Mar 19 00:00:00 EDT 2024 · OSTI ID:2417616

Related Subjects

42 ENGINEERING
71 CLASSICAL AND QUANTUM MECHANICS
GENERAL PHYSICS
Burst pressure
Flow theory of plasticity
Power-law strain hardening
Tesca yield criterion
Thick-walled pipe
Zhu-Leis yield criterion
von Mises yield criterion

Exact solution of burst pressure for thick-walled pipes using the flow theory of plasticity

Citation Formats

References (31)

Similar Records

Related Subjects