Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Large-Eddy Simulation Study of Flow and Combustion Dynamics in a Full-Scale Hydrogen–Air Rotating Detonation Combustor-Stator Integrated System

Journal Article · · Journal of Engineering for Gas Turbines and Power
DOI:https://doi.org/10.1115/1.4066365· OSTI ID:2998186
 [1];  [2];  [1];  [3];  [3];  [3]
  1. Argonne National Laboratory (ANL), Argonne, IL (United States)
  2. North Carolina State University, Raleigh, NC (United States)
  3. Purdue Univ., West Lafayette, IN (United States)
In the present work, a first-of-its-kind three-dimensional (3D) large-eddy simulation (LES) study is conducted to numerically investigate the combustion dynamics as well as aero-thermal phenomena in a full-scale nonpremixed hydrogen–air rotating detonation engine (RDE) (with a diverging-shaped lower-end wall), when integrated with nozzle guide vanes (NGV) acting as the turbine stator. The wall-modeled LES framework incorporates hydrogen–air detailed chemical kinetics and adaptive mesh refinement (AMR). A comparative analysis is carried out for two operating conditions with different fuel/air mass flow rates but global equivalence ratio of unity, and considering RDE configurations without and with stator. The LES model is validated against available experimental data for the low mass flux condition with respect to detonation wave speed/height, wave dynamics, and axial static pressure distribution. Numerical results indicate significant deflagrative combustion occurring in the fill region near the inner wall due to formation of recirculation zones in the injection near-field driven by the backward facing step. The leading detonation wave is found to be trailed by an azimuthal reflected-shock combustion (ARSC) wave, consistent with experimental observations, which consumes unburned vitiated reactants that leak through the main detonation wave. The main detonation wave characteristics, such as detonation wave speed/height and combustion efficiency, do not change appreciably with the presence of NGV. A novel combustion diagnostic technique based on chemical explosive mode analysis (CEMA) is employed to quantify the fraction of heat release occurring in the detonative mode versus deflagrative mode for the simulated conditions. The exit flow is found to be nearly fully subsonic and supersonic for the low and high mass flux conditions, respectively. Further analysis of the exit flow profiles shows that the presence of NGV renders the flow more axial and significantly impacts the exit Mach number and total pressure, while the total temperature shows negligible change. In addition, the low mass flux operating point, despite exhibiting more deflagrative losses within the combustor, yields overall lower pressure drop from plenum to exhaust, which is mainly attributed to lower pressure drop across the injectors. Lastly, the rotating detonation engine-nozzle guide vanes (RDE-NGV) configuration exhibits higher total pressure loss compared to rotating detonation engine (RDE) without stator across both the mass flux conditions. In conclusion, this study extends the state-of-the-art in numerical modeling of pressure gain combustion (PGC) systems by demonstrating high-fidelity 3D reacting LES of full-scale RDE-NGV systems relevant to RDE-turbine integration for stationary power generation.
Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States)
Sponsoring Organization:
USDOE Office of Science (SC); USDOE Office of Fossil Energy and Carbon Management (FECM)
Grant/Contract Number:
FE0032075; AC02-06CH11357
OSTI ID:
2998186
Journal Information:
Journal of Engineering for Gas Turbines and Power, Journal Name: Journal of Engineering for Gas Turbines and Power Journal Issue: 3 Vol. 147; ISSN 1528-8919; ISSN 0742-4795
Publisher:
ASME InternationalCopyright Statement
Country of Publication:
United States
Language:
English

References (16)

A comprehensive modeling study of hydrogen oxidation: A Comprehensive Modeling Study of Hydrogen Oxidation journal August 2004
Chemical explosive mode analysis for a turbulent lifted ethylene jet flame in highly-heated coflow journal January 2012
Chemiluminescence imaging of an optically accessible non-premixed rotating detonation engine journal February 2017
Performance analysis of a rotating detonation combustor based on stagnation pressure measurements journal July 2020
Femtosecond/picosecond rotational coherent anti-Stokes Raman scattering thermometry in the exhaust of a rotating detonation combustor journal September 2021
On the effects of reactant stratification and wall curvature in non-premixed rotating detonation combustors journal June 2022
Coupling characteristic analysis and propagation direction control in hydrogen–air rotating detonation combustor with turbine journal July 2023
Numerical study on the interaction between rotating detonation wave and turbine stator blades with multicomponent mixtures journal January 2024
Rotating detonation combustors and their similarities to rocket instabilities journal July 2019
Detonative propulsion journal January 2013
Identification of premixed flame propagation modes using chemical explosive mode analysis journal January 2019
Mixing and detonation structure in a rotating detonation engine with an axial air inlet journal January 2021
Multidimensional Numerical Modeling of Combustion Dynamics in a Non-Premixed Rotating Detonation Engine With Adaptive Mesh Refinement journal April 2021
Nonidealities in Rotating Detonation Engines journal January 2023
Continuous Spin Detonations journal November 2006
Unsteady Performance of Rotating Detonation Engines with Different Exhaust Nozzles journal January 2017

Similar Records

Numerical simulation of a methane-oxygen rotating detonation rocket engine
Journal Article · Thu Oct 29 00:00:00 EDT 2020 · Proceedings of the Combustion Institute · OSTI ID:1995242

Flow Development in Radial Plane of Rotating Detonation Engine Integrated with Aerospike
Journal Article · Mon May 01 00:00:00 EDT 2023 · Journal of Propulsion and Power · OSTI ID:2418122

The effects of mixture preburning on detonation wave propagation
Journal Article · Thu Oct 29 00:00:00 EDT 2020 · Proceedings of the Combustion Institute · OSTI ID:1808468