Design of the CS insert coil
- Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan); and others
The Engineering Design Activity (EDA) of International Thermonuclear Experimental Reactor (ITER) has been carried out since 1992 among the four Parties which are European Union, Japan, Russian Federation, and US. The design and the fabrication of the Center Solenoid (CS) model coil is under way in the ITER-EDA. The CS model coil consists of four parts, which are the outer module, the inner module, insert, and the supporting structure. The design of the CS insert coil is reported and discussed. The inner diameter of the CS insert coil is 1.5m. The conductor of the CS insert coil is the same as that of the ITER-CS coil. The CS insert coil will be installed inside the CS model coil. The conductor performance will be demonstrated on the maximum magnetic flux density of 13 T at the test facility of Japan Atomic Energy Research Institute (JAERI).
- OSTI ID:
- 287637
- Report Number(s):
- CONF-950691--
- Journal Information:
- IEEE Transactions on Magnetics, Journal Name: IEEE Transactions on Magnetics Journal Issue: 4Pt1 Vol. 32; ISSN IEMGAQ; ISSN 0018-9464
- Country of Publication:
- United States
- Language:
- English
Similar Records
First Test Results on ITER CS Model Coil and CS Insert
Design of the ITER Central Solenoid (CS) model coil