Design of the ITER Central Solenoid (CS) model coil
Journal Article
·
· IEEE Transactions on Magnetics
- Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan); and others
Japan Atomic Energy Research Institute (JAERI) has been designing and developing the Central Solenoid (CS) model coil for International Thermonuclear Experimental Reactor (ITER). The CS model coil is composed of two modules and they will be manufactured by US Home Team and Japanese Home Team. The coil winding method is two-conductors-in-hand and the coil which has an inner diameter of 1.6 m and an outer diameter of 3.6 m, produces a maximum field of 13 T. The coil will be tested in the JAERI facility. This paper describes the coil design, manufacturing procedure, stress analysis on the winding pack and AC loss analysis.
- OSTI ID:
- 282499
- Report Number(s):
- CONF-950691--
- Journal Information:
- IEEE Transactions on Magnetics, Journal Name: IEEE Transactions on Magnetics Journal Issue: 4Pt1 Vol. 32; ISSN IEMGAQ; ISSN 0018-9464
- Country of Publication:
- United States
- Language:
- English
Similar Records
ITER CS Model Coil and CS Insert Test Results
First Test Results on ITER CS Model Coil and CS Insert
Fabrication of the inner module for the ITER central solenoid model coil
Conference
·
Thu Sep 07 00:00:00 EDT 2000
·
OSTI ID:15006127
First Test Results on ITER CS Model Coil and CS Insert
Conference
·
Thu Oct 12 00:00:00 EDT 2000
·
OSTI ID:15013248
Fabrication of the inner module for the ITER central solenoid model coil
Conference
·
Mon May 24 00:00:00 EDT 1999
·
OSTI ID:14462