Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Moessbauer spectroscopy studies of iron-catalysts used in Fischer-Tropsch (FT) processes. Quarterly technical progress report, October--December 1995

Technical Report ·
DOI:https://doi.org/10.2172/257351· OSTI ID:257351

University of Kentucky has been developing Fischer-Tropsch catalysts which are active at a low H{sub 2}/CO ratio. It is of interest to find out any relationships that may exist between the iron phases that are produced during activation and FT synthesis and the activity of the catalysts. Moessbauer spectroscopy investigations were carried out on 16 iron-based catalysts during the period under review. Moessbauer measurements on two of the samples were also carried out at 13.5 K. The composition of one set of the catalysts studied consists of 100Fe/3.6Si/0.71K (all atomic % relative to Fe). Activation was carried out in syngas at a low pressure of 1 atm to investigate the effect of low pressure activation as compared to high pressure activation. The composition of a second set of catalysts consisted of 100Fe/3.6Si/2.6Cu/0.71K (all atomic % relative to Fe) and activation was carried out in syngas at a relatively high pressure of 12 atm. The composition of a third set of catalysts consisted of 100Fe/4.4Si/2.6Cu/1.0K (all atomic % relative to Fe) and activation was carried out in H{sub 2} at 1 atm. In all the cases the temperature was kept at 270 C and space velocity at 3.3nL/hr-g(Fe) for 24hrs. Fischer-Tropsch (FT) synthesis was carried out at 13 atm at 270 C, 3.4nL/hr-g(Fe) syngas/g-Fe/hrs.

Research Organization:
Kentucky Univ., Lexington, KY (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
AC22-94PC93066
OSTI ID:
257351
Report Number(s):
DOE/PC/93066--T8; ON: DE96012291
Country of Publication:
United States
Language:
English