Quantitative prediction of stresses during thermoset cure
Conference
·
OSTI ID:253366
Two thin-walled Al tubes were filled with epoxy which were cured isothermally; one tube was instrumented with strain gauges, and the other with thermocouples. Finite element codes were used. Predicted and measured centerline hoop strains are shown; predictions and measurements agree. This is being applied to encapsulated components.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 253366
- Report Number(s):
- SAND--96-1589C; CONF-960786--4; ON: DE96011718
- Country of Publication:
- United States
- Language:
- English
Similar Records
Stresses during thermoset cure
Mechanical Modeling of Stress Generation During Cure of Encapsulating Resins
An Experimental/Analytical Study of Strains in Encapsulated Assemblies
Journal Article
·
Sat Feb 28 23:00:00 EST 1998
· Journal of Materials Research
·
OSTI ID:664855
Mechanical Modeling of Stress Generation During Cure of Encapsulating Resins
Conference
·
Thu Feb 28 23:00:00 EST 1991
· Materials Research Society Symposia Proceedings
·
OSTI ID:5844388
An Experimental/Analytical Study of Strains in Encapsulated Assemblies
Conference
·
Tue Nov 26 19:00:00 EST 1991
·
OSTI ID:10103354