FY24 Integrated Results for High-Temperature Mechanical Testing of LPBF 316H Stainless Steel
- Argonne National Laboratory (ANL), Argonne, IL (United States)
- Idaho National Laboratory (INL), Idaho Falls, ID (United States)
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
This report provides the mechanical test data of laser powder bed fusion (LPBF) 316H stainless steel (SS) collected during Fiscal Year 2024 (FY 24) under the US Department of Energy, Office of Nuclear Energy’s Advanced Materials and Manufacturing Technologies program, along with the current state of microstructural-based understandings of the behaviors. Materials with variabilities in manufacturing site, machine, laser parameters, powder chemistry, porosity, specimen geometry and heat treatment were tested in high-temperature tension, creep, fatigue and creep-fatigue. Electron microscopy and optical microscopy were performed on selected materials before and after the tests to provide microstructural-based understandings to the mechanical behavior. It was discovered that the as-built (AB) and stress-relieved (SR) materials exhibit similar behaviors in tension and creep, as do the solution-annealed (SA) and hot-isostatic pressed (HIP) materials. The AB and SR materials are softer but more ductile than the SA and HIP materials in tension. In creep, the LPBF materials have comparable rupture times but lower rupture strains compared to the wrought materials. The AB and SR materials have low creep rupture strains (<10%) when tested at 720°C and 800°C, while the SA and HIP materials are much more ductile. The LPBF materials exhibit large scatter in fatigue and creep-fatigue lives. The cyclic lives of creep-fatigue tests are lower than those of fatigue tests. In fatigue and creep-fatigue, SR materials outperform SA materials. A common observation from the cyclic tests is that, given the same post-build heat treatment, a lower initial peak stress generally results in a longer cyclic life regardless of hold time. It was also discovered that the batch variation can be more impactful than heat treatment, as demonstrated by the overall better performance of one batch of material than another, regardless of the heat treatment. The results provided insights into how different factors impact the behaviors of LPBF 316H SS. An outlook to FY 25 work scope is provided.
- Research Organization:
- Argonne National Laboratory (ANL), Argonne, IL (United States). Center for Nanoscale Materials (CNM); Idaho National Laboratory (INL), Idaho Falls, ID (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE Office of Nuclear Energy (NE); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Advanced Materials & Manufacturing Technologies Office (AMMTO)
- DOE Contract Number:
- AC02-06CH11357; AC07-05ID14517; AC05-00OR22725
- OSTI ID:
- 2447990
- Report Number(s):
- ANL-AMMT--013; 191288
- Country of Publication:
- United States
- Language:
- English
Similar Records
Low-Dose Neutron Irradiation Effects on Mechanical Properties of Additively Manufactured 316SS
Development of process parameters and post-build conditions for qualification of LPBF 316 SS