Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Tribological studies of a novel high-performance aromatic thermosetting copolyester containing carbon nanotubes for artificial hip joints

Journal Article · · Tribology International
 [1];  [2];  [3]
  1. Universidad Autónoma de Occidente, Cali-Valle (Colombia); OSTI
  2. Texas A & M Univ., College Station, TX (United States)
  3. Univ. of Illinois at Urbana-Champaign, IL (United States)

A high-performance aromatic thermosetting copolyester containing multi-walled carbon nanotubes (ATSP-MWNTs) was synthesized, characterized, and tribologically tested against cobalt-chromium-molybdenum (CoCrMo) alloy) as a potential replacement for ultra-high molecular weight polyethylene (UHMWPE) in artificial joints. By investigating the tribological properties of ATSP-MWNTs, crosslinked UHMWPE vs CoCrMo alloy, it was found that ATSP-MWNTs exhibited a lower and more stable friction coefficient and negligible wear. Further, unlike the case of ATSP-MWNTs, an obvious wear was present for UHMWPE. It is believed that transfer films in ATSP-MWNTs help to stabilize and decrease friction and wear. In addition, large and aggregated particles of UHMWPE seem to contribute to an increase in friction and wear.

Research Organization:
Univ. of Illinois at Urbana-Champaign, IL (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
Grant/Contract Number:
FG02-91ER45439
OSTI ID:
2419379
Journal Information:
Tribology International, Journal Name: Tribology International Journal Issue: PA Vol. 178; ISSN 0301-679X
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (36)

Effects of reinforcements and gamma‐irradiation on wear performance of ultra‐high molecular weight polyethylene as acetabular cup liner in hip‐joint arthroplasty: A review journal July 2021
Electroactivity and biocompatibility of polypyrrole‐hyaluronic acid multi‐walled carbon nanotube composite journal September 2009
Glass transition broadening via nanofiller‐contiguous polymer network in aromatic thermosetting copolyester nanocomposites journal October 2018
Tribology of Unfilled and Filled Polymeric Surfaces in Refrigerant Environment for Compressor Applications journal August 2005
Tribological Characterization of Aromatic Thermosetting Copolyester–PTFE Blends in Air Conditioning Compressor Environment journal February 2008
Unlubricated Tribological Performance of Aromatic Thermosetting Polyester (ATSP) Coatings Under Different Temperature Conditions journal December 2015
Study on Tribological Properties of Irradiated Crosslinking UHMWPE Nano-Composite journal March 2009
Effects of plasma nitriding on microstructure and tribological properties of CoCrMo alloy implant materials journal December 2010
MXene-aromatic thermosetting copolyester nanocomposite as an extremely wear-resistant biocompatible implant material for osteoarthritis applications journal October 2022
Biomaterials in total joint replacement journal December 2004
UHMWPE for biomedical applications: Performance and functionalization journal February 2020
The effect of surface texturing on thin film reversible adhesive bond strength journal June 2021
Polymeric composites containing carbon nanotubes for bone tissue engineering journal April 2010
New insights into hard phases of CoCrMo metal-on-metal hip replacements journal August 2012
Failure analysis of retrieved PE-UHMW acetabular liners journal August 2016
Tribological behavior of UHMWPE against TiAl6V4 and CoCr28Mo alloys under dry and lubricated conditions journal October 2016
Study on biocompatibility, tribological property and wear debris characterization of ultra-low-wear polyethylene as artificial joint materials journal June 2018
Long-term wear failure analysis of uhmwpe acetabular cup in total hip replacement journal November 2018
Multibody dynamic simulation of knee contact mechanics journal November 2004
Advances in metals and alloys for joint replacement journal July 2017
Wear behavior of UHMWPE composites under oxidative effect journal May 2022
Aromatic thermosetting copolyester nanocomposite foams: High thermal and mechanical performance lightweight structural materials journal August 2017
Tribological study of high bearing blended polymer-based coatings for air-conditioning and refrigeration compressors journal January 2011
The influences of several carbon additions on the fretting wear behaviors of UHMWPE composites journal January 2016
An investigation into tribological behaviour of multi-walled carbon nanotube/graphene oxide reinforced UHMWPE in water lubricated contacts journal March 2016
Friction between a polyethylene pin and a microtextured CoCrMo disc, and its correlation to polyethylene wear, as a function of sliding velocity and contact pressure, in the context of metal-on-polyethylene prosthetic hip implants journal November 2018
Tribology review of blended bulk polymers and their coatings for high-load bearing applications journal January 2019
Increasing the wear resistance of UHMWPE acetabular cups by adding natural biocompatible particles journal June 2009
The effect of surface roughness on the transfer of polymer films under unlubricated testing conditions journal March 2015
Tribological behaviors of composites reinforced by different functionalized carbon nanotube using molecular dynamic simulation journal July 2021
Assessing the Role of Poly(ethylene glycol-bl-propylene sulfide) (PEG-PPS) Block Copolymers in the Preparation of Carbon Nanotube Biocompatible Dispersions journal March 2010
Novel High-Temperature Aromatic Copolyester Thermosets:  Synthesis, Characterization, and Physical Properties journal January 1996
Effect of Carbon Nanotube Addition on Tribological Behavior of UHMWPE journal May 2004
Tribological characterisation of carbon nanotubes/ultrahigh molecular weight polyethylene composites: the effect of sliding distance journal January 2010
Overview of Carbon Nanotubes for Biomedical Applications journal February 2019
Effect of Argon Plasma Treatment on Tribological Properties of UHMWPE/MWCNT Nanocomposites journal August 2016

Similar Records

Study on Tribological Properties of CoCrMo Alloys against Metals and Ceramics as Bearing Materials for Artificial Cervical Disc
Journal Article · Wed Feb 14 23:00:00 EST 2018 · Journal of Materials Engineering and Performance · OSTI ID:22860633

Adhesion characteristics of aromatic thermosetting copolyester and glass fiber laminates with copper foils for improved circuit boards
Journal Article · Wed Jun 22 00:00:00 EDT 2016 · Polymers for Advanced Technologies · OSTI ID:1533201

Tribological performance of some alternative bearing materials for artificial joints.
Journal Article · Fri Aug 01 00:00:00 EDT 2003 · Wear · OSTI ID:961446