Development of Self-Assembly Supports Enabling Transformational Membrane Performance for Cost-Effective Carbon Capture
- Membrane Technology and Research, Inc., Newark, CA (United States); Membrane Technology and Research, Inc. (MTR)
- Membrane Technology and Research, Inc., Newark, CA (United States)
- Univ. at Buffalo, NY (United States)
- Univ. of Texas, Austin, TX (United States)
This final technical report describes work conducted by Membrane Technology and Research, Inc. (MTR) for the U.S. Department of Energy (DOE), National Energy Technology Lab (NETL) on the development of membranes with transformational performance for carbon capture under award number DE-FE0031596. The work was performed from June 1, 2018 through May 31, 2024. For more than a decade, MTR has worked in partnership with DOE to develop an innovative membrane-based CO2 capture process. This effort has included the first test of membrane modules with coal-fired flue gas at the Arizona Public Services (APS) Cholla plant in 2010; the accumulation of >11,000 hours of flue gas operation for Polaris modules on a bench-scale 1 tonne/day (TPD) system at the National Carbon Capture Center (NCCC); scale-up of first-generation (Gen-1) Polaris to a 20 TPD small pilot system, and successful operation of this system on a flue gas slipstream at NCCC and in integrated boiler testing at Babcock & Wilcox (B&W). Through continued development efforts, a second-generation (Gen-2) version of the Polaris membrane has been scaled-up to pilot production. This membrane offers 70% higher CO2 permeance with similar selectivity to the base case Polaris. MTR also developed planar modules designed specifically for the low-pressure, high-volumetric flow rate process conditions of flue gas operation. These new modules have significantly lower pressure-drop values compared to the type originally used (spiral-wound modules), which results in significant energy savings. The goal of the work described in this report was to improve on the Polaris Gen-2 membrane with the ultimate aim to reduce the cost of carbon capture. The majority of the effort was to develop improved support membranes for the multi-layer composite structure of MTR’s Polaris membrane. Earlier work at MTR had identified the support structure as limiting membrane permeances, not because the support itself represents a permeation resistance, but because the distribution of pores at the surface of the support imposes a geometric restriction to diffusion in the layers above it. Support membranes were prepared from a range of polymers, including commercially available block copolymers and a custom synthesized block copolymer alternative. The best support membranes developed in this project reduced the geometric restriction by a factor of two to three. These supports then were used to produce Polaris composite membranes with improved permeances. The second topic was to create a high-selectivity version of the Polaris membrane. The high-selectivity version uses a novel selective polymeric material and high selectivities were confirmed in experiments at MTR. The material is not easily made into very thin films. Consequently, the permeances are significantly lower than the Polaris Gen-2 membrane. The utility of this membrane is therefore limited to the carbon dioxide purification step that produces liquid CO2. A Technical and Economic Analysis (TEA) was performed for a carbon capture system that uses both advanced membrane types. The TEA shows the novel advanced membranes reduce the cost of capture by 10%, from $63.32/tonne CO2 to $56.90/tonne CO2 (2022 USD). Most of the development work was carried out with laboratory-scale casting and coating equipment. A number, but not all, of the improvements identified have been implemented on commercial-scale manufacturing equipment. The focus of future work at MTR is to incorporate the advancements made into the Polaris membrane manufacturing process.
- Research Organization:
- Membrane Technology and Research, Inc., Newark, CA (United States)
- Sponsoring Organization:
- USDOE Office of Fossil Energy and Carbon Management (FECM)
- DOE Contract Number:
- FE0031596
- OSTI ID:
- 2386964
- Report Number(s):
- MTR--384; MTR 384
- Country of Publication:
- United States
- Language:
- English
Similar Records
Pilot testing of a membrane system for postcombustion CO2 capture
Novel Inorganic/Polymer Composite Membranes for CO2 Capture
Carbon Capture utilizing Hybrids: Membrane and Liquefaction
Technical Report
·
Wed Sep 30 00:00:00 EDT 2015
·
OSTI ID:1337555
Novel Inorganic/Polymer Composite Membranes for CO2 Capture
Technical Report
·
Sat Oct 01 00:00:00 EDT 2016
·
OSTI ID:1333116
Carbon Capture utilizing Hybrids: Membrane and Liquefaction
Conference
·
Tue Jul 16 00:00:00 EDT 2019
·
OSTI ID:1605737