Bench mark test casting: Modeling of mold filling and solidification
Conference
·
OSTI ID:227830
- Concurrent Technologies Corp., Johnstown, PA (United States)
This paper presents the results of simulating the mold filling and solidification of an aluminum plate casting designed as the Bench Mark Test Casting for this conference. An in-house simulation software, RAPID/CAST{reg_sign}, has been used to conduct this simulation. The output of this simulation include flow front location during mold filling, cooling curves at various points in the casting, temperature distribution, and isochron plots of solidification times. The simulation results indicate that the mold filling time of the entire casting is 2.2 seconds and that the last region to solidify is located around the ingate.
- OSTI ID:
- 227830
- Report Number(s):
- CONF-9509118--; ISBN 0-87339-297-3
- Country of Publication:
- United States
- Language:
- English
Similar Records
Mould filling and solidification simulation of the bench mark casting
Casting process modeling using ProCAST and CAST2D -- Mold filling, solidification and structural response
Casting process modeling using ProCAST and CAST2D -- Mold filling, solidification and structural response
Conference
·
Sat Dec 30 23:00:00 EST 1995
·
OSTI ID:227828
Casting process modeling using ProCAST and CAST2D -- Mold filling, solidification and structural response
Technical Report
·
Tue Mar 31 23:00:00 EST 1992
·
OSTI ID:10140740
Casting process modeling using ProCAST and CAST2D -- Mold filling, solidification and structural response
Technical Report
·
Tue Mar 31 23:00:00 EST 1992
·
OSTI ID:5655226