Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Design and fabrication of a duoplasmatron extraction geometry and LEBT for the LANSCE H{sup +} RFQ project

Journal Article · · Review of Scientific Instruments
DOI:https://doi.org/10.1063/1.4932315· OSTI ID:22483014
; ; ; ;  [1]
  1. Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

The 750-keV H{sup +} Cockcroft-Walton at LANSCE will be replaced with a recently fabricated 4-rod Radio Frequency Quadrupole (RFQ) with injection energy of 35 keV. The existing duoplasmatron source extraction optics need to be modified to produce up to 35 mA of H{sup +} current with an emittance <0.02 π-cm-mrad (rms, norm) for injection into the RFQ. Parts for the new source have been fabricated and assembly is in process. We will use the existing duoplasmatron source with a newly designed extraction system and low energy beam transport (LEBT) for beam injection into the RFQ. In addition to source modifications, we need a new LEBT for transport and matching into the RFQ. The LEBT uses two magnetic solenoids with enough drift space between them to accommodate diagnostics and a beam deflector. The LEBT is designed to work over a range of space-charge neutralized currents and emittances. The LEBT is optimized in the sense that it minimizes the beam size in both solenoids for a point design of a given neutralized current and emittance. Special attention has been given to estimating emittance growth due to source extraction optics and solenoid aberrations. Examples of source-to-RFQ matching and emittance growth (due to both non-linear space charge and solenoid aberrations) are presented over a range of currents and emittances about the design point. A mechanical layout drawing will be presented along with the status of the source and LEBT, design, and fabrication.

OSTI ID:
22483014
Journal Information:
Review of Scientific Instruments, Journal Name: Review of Scientific Instruments Journal Issue: 2 Vol. 87; ISSN 0034-6748; ISSN RSINAK
Country of Publication:
United States
Language:
English

Similar Records

Commissioning of Phase 1 of the LANL RFQ Test Stand - Beam Characterization
Technical Report · Sun Jan 29 23:00:00 EST 2023 · OSTI ID:1922748

H sup minus source and low energy transport for an RFQ preinjector
Conference · Sun Dec 31 23:00:00 EST 1989 · Review of Scientific Instruments; (USA) · OSTI ID:6908282

Status report on a dc 130-mA, 75-keV proton injector
Conference · Wed Oct 01 00:00:00 EDT 1997 · OSTI ID:538072