skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Shielding in ungated field emitter arrays

Abstract

Cathodes consisting of arrays of high aspect ratio field emitters are of great interest as sources of electron beams for vacuum electronic devices. The desire for high currents and current densities drives the cathode designer towards a denser array, but for ungated emitters, denser arrays also lead to increased shielding, in which the field enhancement factor β of each emitter is reduced due to the presence of the other emitters in the array. To facilitate the study of these arrays, we have developed a method for modeling high aspect ratio emitters using tapered dipole line charges. This method can be used to investigate proximity effects from similar emitters an arbitrary distance away and is much less computationally demanding than competing simulation approaches. Here, we introduce this method and use it to study shielding as a function of array geometry. Emitters with aspect ratios of 10{sup 2}–10{sup 4} are modeled, and the shielding-induced reduction in β is considered as a function of tip-to-tip spacing for emitter pairs and for large arrays with triangular and square unit cells. Shielding is found to be negligible when the emitter spacing is greater than the emitter height for the two-emitter array, or about 2.5 timesmore » the emitter height in the large arrays, in agreement with previously published results. Because the onset of shielding occurs at virtually the same emitter spacing in the square and triangular arrays, the triangular array is preferred for its higher emitter density at a given emitter spacing. The primary contribution to shielding in large arrays is found to come from emitters within a distance of three times the unit cell spacing for both square and triangular arrays.« less

Authors:
 [1];  [2];  [3];  [4]
  1. U.S. Navy Reserve, Navy Operational Support Center New Orleans, New Orleans, Louisiana 70143 (United States)
  2. Code 6854, Naval Research Laboratory, Washington, D.C. 20375 (United States)
  3. Directed Energy Directorate, Air Force Research Laboratory, Albuquerque, New Mexico 87117 (United States)
  4. Leidos, Billerica, Massachusetts 01821 (United States)
Publication Date:
OSTI Identifier:
22402451
Resource Type:
Journal Article
Journal Name:
Applied Physics Letters
Additional Journal Information:
Journal Volume: 106; Journal Issue: 20; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 0003-6951
Country of Publication:
United States
Language:
English
Subject:
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; ASPECT RATIO; CATHODES; CURRENT DENSITY; ELECTRON BEAMS; ELECTRONIC EQUIPMENT; SHIELDING; SIMULATION

Citation Formats

Harris, J. R., Jensen, K. L., Shiffler, D. A., and Petillo, J. J. Shielding in ungated field emitter arrays. United States: N. p., 2015. Web. doi:10.1063/1.4921709.
Harris, J. R., Jensen, K. L., Shiffler, D. A., & Petillo, J. J. Shielding in ungated field emitter arrays. United States. doi:10.1063/1.4921709.
Harris, J. R., Jensen, K. L., Shiffler, D. A., and Petillo, J. J. Mon . "Shielding in ungated field emitter arrays". United States. doi:10.1063/1.4921709.
@article{osti_22402451,
title = {Shielding in ungated field emitter arrays},
author = {Harris, J. R. and Jensen, K. L. and Shiffler, D. A. and Petillo, J. J.},
abstractNote = {Cathodes consisting of arrays of high aspect ratio field emitters are of great interest as sources of electron beams for vacuum electronic devices. The desire for high currents and current densities drives the cathode designer towards a denser array, but for ungated emitters, denser arrays also lead to increased shielding, in which the field enhancement factor β of each emitter is reduced due to the presence of the other emitters in the array. To facilitate the study of these arrays, we have developed a method for modeling high aspect ratio emitters using tapered dipole line charges. This method can be used to investigate proximity effects from similar emitters an arbitrary distance away and is much less computationally demanding than competing simulation approaches. Here, we introduce this method and use it to study shielding as a function of array geometry. Emitters with aspect ratios of 10{sup 2}–10{sup 4} are modeled, and the shielding-induced reduction in β is considered as a function of tip-to-tip spacing for emitter pairs and for large arrays with triangular and square unit cells. Shielding is found to be negligible when the emitter spacing is greater than the emitter height for the two-emitter array, or about 2.5 times the emitter height in the large arrays, in agreement with previously published results. Because the onset of shielding occurs at virtually the same emitter spacing in the square and triangular arrays, the triangular array is preferred for its higher emitter density at a given emitter spacing. The primary contribution to shielding in large arrays is found to come from emitters within a distance of three times the unit cell spacing for both square and triangular arrays.},
doi = {10.1063/1.4921709},
journal = {Applied Physics Letters},
issn = {0003-6951},
number = 20,
volume = 106,
place = {United States},
year = {2015},
month = {5}
}