Vitrification of high level nuclear waste inside ambient temperature disposal containers using inductive heating: The SMILE system
Conference
·
OSTI ID:219434
A new approach, termed SMILE (Small Module Inductively Loaded Energy), for the vitrification of high level nuclear wastes (HLW) is described. Present vitrification systems liquefy the HLW solids and associated frit material in large high temperature melters. The molten mix is then poured into small ({approximately}1 m{sup 3}) disposal canisters, where it solidifies and cools. SMILE eliminates the separate, large high temperature melter. Instead, the BLW solids and frit melt inside the final disposal containers, using inductive heating. The contents then solidify and cool in place. The SMILE modules and the inductive heating process are designed so that the outer stainless can of the module remains at near ambient temperature during the process cycle. Module dimensions are similar to those of present disposal containers. The can is thermally insulated from the high temperature inner container by a thin layer of refractory alumina firebricks. The inner container is a graphite crucible lined with a dense alumina refractory that holds the HLW and fiit materials. After the SMILE module is loaded with a slurry of HLW and frit solids, an external multi-turn coil is energized with 30-cycle AC current. The enclosing external coil is the primary of a power transformer, with the graphite crucible acting as a single turn ``secondary.`` The induced current in the ``secondary`` heats the graphite, which in turn heats the HLW and frit materials. The first stage of the heating process is carried out at an intermediate temperature to drive off remnant liquid water and water of hydration, which takes about 1 day. The small fill/vent tube to the module is then sealed off and the interior temperature raised to the vitrification range, i.e., {approximately}1200C. Liquefaction is complete after approximately 1 day. The inductive heating then ceases and the module slowly loses heat to the environment, allowing the molten material to solidify and cool down to ambient temperature.
- Research Organization:
- Brookhaven National Lab., Upton, NY (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC02-76CH00016
- OSTI ID:
- 219434
- Report Number(s):
- BNL--62230; CONF-960212--41; ON: DE96006781
- Country of Publication:
- United States
- Language:
- English
Similar Records
Vitrification of HLW inside sealed low-temperature disposal canisters by inductive heating
AVS: Experimental Tests of a New Process to Inductively Vitrify HLW Inside the Final Disposal Containers at Very High Waste Loadings
FEASIBILITY EVALUATION AND RETROFIT PLAN FOR COLD CRUCIBLE INDUCTION MELTER DEPLOYMENT IN THE DEFENSE WASTE PROCESSING FACILITY AT SAVANNAH RIVER SITE - 8118
Journal Article
·
Mon Dec 30 23:00:00 EST 1996
· Transactions of the American Nuclear Society
·
OSTI ID:426382
AVS: Experimental Tests of a New Process to Inductively Vitrify HLW Inside the Final Disposal Containers at Very High Waste Loadings
Conference
·
Mon Feb 25 23:00:00 EST 2002
·
OSTI ID:828352
FEASIBILITY EVALUATION AND RETROFIT PLAN FOR COLD CRUCIBLE INDUCTION MELTER DEPLOYMENT IN THE DEFENSE WASTE PROCESSING FACILITY AT SAVANNAH RIVER SITE - 8118
Conference
·
Wed Nov 14 23:00:00 EST 2007
·
OSTI ID:920665