Direct-current cathodic vacuum arc system with magnetic-field mechanism for plasma stabilization
- Department of Mechanical Engineering, University of California, Berkeley, California 94720 (United States)
Filtered cathodic vacuum arc (FCVA) deposition is characterized by plasma beam directionality, plasma energy adjustment via substrate biasing, macroparticle filtering, and independent substrate temperature control. Between the two modes of FCVA deposition, namely, direct current (dc) and pulsed arc, the dc mode yields higher deposition rates than the pulsed mode. However, maintaining the dc arc discharge is challenging because of its inherent plasma instabilities. A system generating a special configuration of magnetic field that stabilizes the dc arc discharge during film deposition is presented. This magnetic field is also part of the out-of-plane magnetic filter used to focus the plasma beam and prevent macroparticle film contamination. The efficiency of the plasma-stabilizing magnetic-field mechanism is demonstrated by the deposition of amorphous carbon (a-C) films exhibiting significantly high hardness and tetrahedral carbon hybridization (sp{sup 3}) contents higher than 70%. Such high-quality films cannot be produced by dc arc deposition without the plasma-stabilizing mechanism presented in this study.
- OSTI ID:
- 21124042
- Journal Information:
- Review of Scientific Instruments, Vol. 79, Issue 7; Other Information: DOI: 10.1063/1.2949128; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Mo-containing tetrahedral amorphous carbon deposited by dualfiltered cathodic vacuum arc with selective pulsed bias voltage
Macroparticle-free thin films produced by an efficient vacuum arc deposition technique