skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Growth and characterization of chromium oxide thin films prepared by reactive ac magnetron sputtering

Journal Article · · Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films
DOI:https://doi.org/10.1116/1.2244536· OSTI ID:20853537
; ;  [1]
  1. Department of Mechanical Engineering, University of Arkansas, Fayetteville, Arkansas 72701 (United States)

CrO{sub x} thin films were prepared on single crystal silicon (111 orientation) and glass substrates by midfrequency (41 kHz) ac sputtering technique in an Isoflux ICM-10 sputter deposition system consisting of two hollow cylindrical targets of Cr in an argon-oxygen plasma at a discharge power of 5 kW and without any deliberate substrate heating. X-ray diffraction studies showed that the coatings were of hcp rhombohedral {alpha}-phase chromium oxide. CrO{sub x} coating samples were found to grow preferentially towards the (110) crystal orientation of {alpha}-Cr{sub 2}O{sub 3}. Texturing was found to depend on the orientation of the substrates relative to the targets and also on the nature of substrates. One coating sample grown on Si substrate was annealed in air up to 1173 K. Whereas heat treatment increased the crystallite size, CrO{sub x} coating was thermally stable and did not show any structural transformations. Scanning electron microscopy studies showed differences in the surface morphology of the coatings grown on glass and silicon substrates. Dynamic secondary ion mass spectrometry measurements performed on one CrO{sub x} coating deposited on silicon showed that the O/Cr ratio in the films was 1.38. Ar and H impurity concentrations were also measured in this coating as a function of film thickness. Alumina coatings were prepared on Si substrates by reactive sputtering technique using CrO{sub x} coating as template layers. X-ray diffraction studies showed that CrO{sub x} template layers improved the crystallinity of alumina coatings grown on top of it and also facilitated the formation of the thermodynamically stable {alpha}-alumina phase.

OSTI ID:
20853537
Journal Information:
Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films, Vol. 24, Issue 5; Other Information: DOI: 10.1116/1.2244536; (c) 2006 American Vacuum Society; Country of input: International Atomic Energy Agency (IAEA); ISSN 1553-1813
Country of Publication:
United States
Language:
English

Similar Records

Growth and characterization of alpha-Cr2O3 thin films prepared by reactive AC magnetron sputtering
Journal Article · Sun Jan 01 00:00:00 EST 2006 · Journal of Vacuum Science & Technology A · OSTI ID:20853537

CrN{sub x} and Cr{sub 1-x}Al{sub x}N as template films for the growth of {alpha}-alumina using ac reactive magnetron sputtering
Journal Article · Sat Sep 15 00:00:00 EDT 2007 · Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films · OSTI ID:20853537

Effects of deposition parameters on the structure of AlN coatings grown by reactive magnetron sputtering
Journal Article · Tue May 15 00:00:00 EDT 2007 · Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films · OSTI ID:20853537