Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

The effect of cyclic and dynamic loads on carbon steel pipe

Technical Report ·
DOI:https://doi.org/10.2172/206603· OSTI ID:206603

This report presents the results of four 152-mm (6-inch) diameter, unpressurized, circumferential through-wall-cracked, dynamic pipe experiments fabricated from STS410 carbon steel pipe manufactured in Japan. For three of these experiments, the through-wall crack was in the base metal. The displacement histories applied to these experiments were a quasi-static monotonic, dynamic monotonic, and dynamic, cyclic (R = {minus}1) history. The through-wall crack for the third experiment was in a tungsten-inert-gas weld, fabricated in Japan, joining two lengths of STS410 pipe. The displacement history for this experiment was the same history applied to the dynamic, cyclic base metal experiment. The test temperature for each experiment was 300 C (572 F). The objective of these experiments was to compare a Japanese carbon steel pipe material with US pipe material, to ascertain whether this Japanese steel was as sensitive to dynamic and cyclic effects as US carbon steel pipe. In support of these pipe experiments, quasi-static and dynamic, tensile and fracture toughness tests were conducted. An analysis effort was performed that involved comparing experimental crack initiation and maximum moments with predictions based on available fracture prediction models, and calculating J-R curves for the pipe experiments using the {eta}-factor method.

Research Organization:
Nuclear Regulatory Commission, Washington, DC (United States). Div. of Engineering Technology; Battelle, Columbus, OH (United States)
Sponsoring Organization:
Nuclear Regulatory Commission, Washington, DC (United States)
OSTI ID:
206603
Report Number(s):
NUREG/CR--6438; BMI--2188; ON: TI96007099
Country of Publication:
United States
Language:
English