The effect of char structure on burnout during pulverized coal combustion at pressure
An Australian bituminous coal sample was burnt in a drop tube furnace (DTF) at 1 atm and a pressurized drop tube furnace (PDTF) at 15 atm. The char samples were collected at different burnout levels, and a scanning electron microscope was used to examine the structures of chars. A model was developed to predict the burnout of char particles with different structures. The model accounts for combustion of the thin-walled structure of cenospheric char and its fragmentation during burnout. The effect of pressure on reaction rate was also considered in the model. As a result, approximately 40% and 70% cenospheric char particles were observed in the char samples collected after coal pyrolysis in the DTF and PDTF respectively. A large number of fine particles (< 30 mm) were observed in the 1 atm char samples at burnout levels between 30% and 50%, which suggests that significant fragmentation occurred during early combustion. Ash particle size distributions show that a large number of small ash particles formed during burnout at high pressure. The time needed for 70% char burnout at 15 atm is approximately 1.6 times that at 1 atm under the same temperature and gas environment conditions, which is attributed to the different pressures as well as char structures. The overall reaction rate for cenospheric char was predicted to be approximately 2 times that of the dense chars, which is consistent with previous experimental results. The predicted char burnout including char structures agrees reasonably well with the experimental measurements that were obtained at 1 atm and 15 atm pressures.
- Research Organization:
- Univ. of Newcastle, Callaghan (AU)
- OSTI ID:
- 20082340
- Resource Relation:
- Conference: Sixteenth Annual International Pittsburgh Coal Conference, Pittsburgh, PA (US), 10/11/1999--10/15/1999; Other Information: 1 CD-ROM. Operating systems required: Windows 95/98; Windows 3.X, Macintosh; PBD: 1999; Related Information: In: Sixteenth annual international Pittsburgh Coal Conference: Proceedings, [2000] pages.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluating the combustion reactivity of drop tube furnace and thermogravimetric analysis coal chars with a selection of metal additives
A burnout prediction model based around char morphology