Influence of ionomer content in catalyst layers on direct methanol fuel cell performance
The ionomer content in catalyst layers has a marked influence on direct methanol fuel cell (DMFC) performance. In an anode which contains unsupported PtRu as the catalyst, the recast ionomer may not always be necessary because the protonic conductivity of hydrous RuOx, the presence of which is inferred from the X-ray diffraction pattern, may be sufficient to allow effective utilization of catalyst sites. To examine interpenetration of catalyst and membrane material as a possible explanation for the lack of an apparent need of added ionomer, ultramicrotomed thin sections of the membrane-electrode assembly (MEA) were examined by scanning electron microscopy. Microscopic examination of such MEA cross sections revealed significant porosity in layers made by mixing unsupported catalysts with recast ionomer. Images of such sections did not reveal significant interpenetration, supporting the interpretation that hydrous RuOx may by itself provide sufficient protonic conductivity in PtRu catalyst layers prepared with no added ionomer. In contrast they show that the presence of recast ionomer in DMFC cathodes based on unsupported Pt as the catalyst is essential for optimum DMFC performance, because the recast ionomer is the primary source of protonic conductivity in the latter case. Having shown its potential function as proton conductor, they stress that Ru oxide is apparently not the key for maximizing DMFC anodic activity.
- Research Organization:
- Los Alamos National Lab., NM (US)
- OSTI ID:
- 20013019
- Journal Information:
- Journal of the Electrochemical Society, Vol. 146, Issue 12; Other Information: PBD: Dec 1999; ISSN 0013-4651
- Country of Publication:
- United States
- Language:
- English
Similar Records
Facilitated Direct Liquid Fuel Cells with High Temperature Membrane Electrode Assemblies
Ionomer Degradation in Electrodes of PEM Fuel Cell