Residual stresses in Cu matrix composite surface deposits after laser melt injection

Zhang, Xing Xing; Kornmeier, J R.; Hofmann, Michael; Langebeck, A; Alameddin, S; Alessio, R; Fritzen, F.; Bunn, Jeffrey R.; Cabeza, Sandra

doi:10.1111/str.12457

Residual stresses in Cu matrix composite surface deposits after laser melt injection

Conference · Sat Jul 01 00:00:00 EDT 2023

DOI:https://doi.org/10.1111/str.12457· OSTI ID:1991737

Zhang, Xing Xing ^[1]; Kornmeier, J R. ^[1]; Hofmann, Michael ^[1]; Langebeck, A ^[2]; Alameddin, S ^[3]; Alessio, R ^[3]; Fritzen, F. ^[3]; ^[4]; Cabeza, Sandra ^[5]

Heinz Maier-Leibnitz Zentrum
BIAS – Bremer Institut fuer angewandte
University of Stuttgart, Germany
ORNL
Institut Laue-Langevin (ILL)

Metal matrix composite (MMC) coatings can improve surface wear resistance significantly. However, both macro and micro residual stresses exist in the MMC coatings, causing detrimental effects such as reducing service life. Based on neutron diffraction, we measured the residual stresses in the spherical fused tungsten carbide (sFTC) reinforced Cu matrix composite surface deposits after laser melt injection. Thermo-mechanical coupled finite element model was also developed to predict the residual stresses. We found that the residual stresses are low in the sFTC/Cu composite deposit produced with 400 °C preheating temperature, with a maximum tensile residual stress of 98 MPa in the Cu matrix on the top surface. In contrast, the residual stresses in the sFTC/bronze (CuAl10Ni5Fe4) composite deposit are very high. The maximum tensile residual stress in the Cu matrix of the sFTC/bronze composite deposit reaches 651 MPa on the top surface. The present investigations can help the researchers to control the residual stresses in the Cu matrix composite surface deposits and increase the service life of wear-resistant coatings in the future.

View Conference

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE; USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)

DOE Contract Number:: AC05-00OR22725

OSTI ID:: 1991737

Country of Publication:: United States

Language:: English

References (19)

A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy Bai, Haiqiang; Zhong, Lisheng; Kang, Ling Journal of Alloys and Compounds, Vol. 882 https://doi.org/10.1016/j.jallcom.2021.160645	journal	November 2021
The high intensity diffractometer for residual stress analysis (HIDRA), a third generation residual stress mapping neutron diffractometer at the high flux isotope reactor Bunn, J. R.; Fancher, C. M.; Payzant, E. A. Review of Scientific Instruments, Vol. 94, Issue 3 https://doi.org/10.1063/5.0122250	journal	March 2023
Laser melt injection of spherical fused tungsten carbide in Cu-ETP with 515 nm wavelength laser Langebeck, Anika; Bohlen, Annika; Seefeld, Thomas Procedia CIRP, Vol. 111 https://doi.org/10.1016/j.procir.2022.08.071	journal	January 2022
Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings Ahmed, R.; Yu, H.; Stoica, V. Materials Science and Engineering: A, Vol. 498, Issue 1-2 https://doi.org/10.1016/j.msea.2008.08.023	journal	December 2008
A Novel Thermal Sensor Applied for Laser Materials Processing Köhler, H.; Jayaraman, V.; Brosch, D. Physics Procedia, Vol. 41 https://doi.org/10.1016/j.phpro.2013.03.107	journal	January 2013
Research and progress of laser cladding on engineering alloys: A review Liu, Yanan; Ding, Ye; Yang, Lijun Journal of Manufacturing Processes, Vol. 66 https://doi.org/10.1016/j.jmapro.2021.03.061	journal	June 2021
Residual stress and its role in failure Withers, P. J. Reports on Progress in Physics, Vol. 70, Issue 12 https://doi.org/10.1088/0034-4885/70/12/R04	journal	November 2007
Synthesis of W₂C by Reactive Hot Pressing and Its Mechanical Properties Taimatsu, Hitoshi; Sugiyama, Shigeaki; Kodaira, Yuichiro MATERIALS TRANSACTIONS, Vol. 49, Issue 6 https://doi.org/10.2320/matertrans.MRA2007304	journal	January 2008
Phase compatibility in (WC-W2C)/AlFeCoNiCrTi composite produced by spark plasma sintering Teslia, Sergii; Solodkyi, Ievgen; Yurkova, Oleksandra Journal of Alloys and Compounds, Vol. 921 https://doi.org/10.1016/j.jallcom.2022.166042	journal	November 2022
International standardization and organizations in the field of tribology Dašić, Predrag; Franek, Friedrich; Assenova, Emilia Industrial Lubrication and Tribology, Vol. 55, Issue 6 https://doi.org/10.1108/00368790310496437	journal	December 2003
Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation Ahn, J.; He, E.; Chen, L. Materials & Design, Vol. 115 https://doi.org/10.1016/j.matdes.2016.11.078	journal	February 2017
Residual stress distributions and their influence on fatigue lifetimes Webster, G. A.; Ezeilo, A. N. International Journal of Fatigue, Vol. 23 https://doi.org/10.1016/S0142-1123(01)00133-5	journal	January 2001
Residual stress gradient and relaxation upon fatigue deformation of diamond-like carbon coated aluminum alloy in air and methanol environments Srinivasan, Nedunchezhian; Bhaskar, Lalith Kumar; Kumar, Ravi Materials & Design, Vol. 160 https://doi.org/10.1016/j.matdes.2018.09.022	journal	December 2018
Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications Zhai, Wenzheng; Bai, Lichun; Zhou, Runhua Advanced Science, Vol. 8, Issue 11 https://doi.org/10.1002/advs.202003739	journal	March 2021
Lattice strains and diffraction elastic constants of cubic polycrystals Zhang, Yin; Chen, Wen; McDowell, David L. Journal of the Mechanics and Physics of Solids, Vol. 138 https://doi.org/10.1016/j.jmps.2020.103899	journal	May 2020
Laser-Assisted Cold-Sprayed Corrosion- and Wear-Resistant Coatings: A Review Olakanmi, E. O.; Doyoyo, M. Journal of Thermal Spray Technology, Vol. 23, Issue 5 https://doi.org/10.1007/s11666-014-0098-x	journal	April 2014
Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements Fitzpatrick, M. E.; Hutchings, M. T.; Withers, P. J. Acta Materialia, Vol. 45, Issue 12 https://doi.org/10.1016/S1359-6454(97)00209-7	journal	December 1997
A complete reassessment of standard residual stress uncertainty analyses using neutron diffraction emphasizing the influence of grain size Wimpory, Robert Charles; Martins, René V.; Hofmann, Michael International Journal of Pressure Vessels and Piping, Vol. 164 https://doi.org/10.1016/j.ijpvp.2017.09.002	journal	July 2018
The application of the eshelby method of internal stress determination to short fibre metal matrix composites Withers, P. J.; Stobbs, W. M.; Pedersen, O. B. Acta Metallurgica, Vol. 37, Issue 11 https://doi.org/10.1016/0001-6160(89)90341-6	journal	November 1989

Similar Records

Residual stresses in Cu matrix composite surface deposits after laser melt injection

Journal Article · Thu Jul 06 00:00:00 EDT 2023 · Strain · OSTI ID:1988684

Effects of wear-resistant coatings on the fatigue strength of 4340 steel

Conference · Wed Dec 30 23:00:00 EST 1998 · OSTI ID:335425

Residual stresses in Cu matrix composite surface deposits after laser melt injection

Citation Formats

References (19)

Similar Records

Related Subjects