Unexpected δ-Phase Formation in Additive-Manufactured Ni-Based Superalloy
|
journal
|
January 2016 |
Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
|
journal
|
September 2014 |
Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
|
journal
|
July 2017 |
Thermodynamically consistent microstructure prediction of additively manufactured materials
|
journal
|
January 2016 |
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting
|
journal
|
October 2013 |
Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
- Denlinger, Erik R.; Heigel, Jarred C.; Michaleris, Panagiotis
-
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 229, Issue 10
https://doi.org/10.1177/0954405414539494
|
journal
|
July 2014 |
Multi-scale modeling of electron beam melting of functionally graded materials
|
journal
|
August 2016 |
On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni–Nb alloys
|
journal
|
June 2017 |
Modeling forced convection in the thermal simulation of laser cladding processes
|
journal
|
February 2015 |
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
|
journal
|
February 2014 |
Additive manufacturing of metallic components – Process, structure and properties
|
journal
|
March 2018 |
Additive manufacturing of materials: Opportunities and challenges
|
journal
|
November 2015 |
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
|
journal
|
September 2014 |
Precipitation of the δ-Ni3Nb phase in two nickel base superalloys
|
journal
|
March 1988 |
Origin of grain orientation during solidification of an aluminum alloy
|
journal
|
August 2016 |
Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing
|
journal
|
July 2018 |
Three-dimensional modeling of the microstructure evolution during metal additive manufacturing
|
journal
|
January 2018 |
The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718
|
journal
|
May 2017 |
Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
|
journal
|
September 2018 |
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
|
journal
|
May 2017 |
Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
|
journal
|
May 2017 |
Thermomechanical Modeling of Additive Manufacturing Large Parts
|
journal
|
October 2014 |
Additive manufacturing of metallic components by selective electron beam melting — a review
|
journal
|
March 2016 |
Some aspects of the precipitation of metastable intermetallic phases in INCONEL 718
|
journal
|
July 1992 |
Numerical modeling and experimental validation of thermal history and microstructure for additive manufacturing of an Inconel 718 product
|
journal
|
January 2018 |
Phase field simulation of powder bed-based additive manufacturing
|
journal
|
February 2018 |
Electron beam melted Ti–6Al–4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material
|
journal
|
January 2016 |
The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing
|
journal
|
February 2017 |
Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
|
journal
|
April 2015 |
Prediction of microstructure in laser powder bed fusion process
|
journal
|
February 2017 |
Thermal and microstructural analysis of laser-based directed energy deposition for Ti-6Al-4V and Inconel 625 deposits
|
journal
|
February 2018 |
Simulation of microstructure evolution during hybrid deposition and micro-rolling process
|
journal
|
April 2016 |
Predicting Coherency Loss of $$ \gamma^{\prime\prime} $$ γ ″ Precipitates in IN718 Superalloy
|
journal
|
April 2016 |
Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy
|
journal
|
March 2017 |
Phase-Field Modeling of Microstructure Evolution in Electron Beam Additive Manufacturing
|
journal
|
March 2015 |
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
|
journal
|
October 2017 |