Design of CCT6: A Large Aperture, Nb$_3$Sn Dipole Magnet for HTS Insert Testing
|
journal
|
September 2022 |
Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes
|
journal
|
August 2019 |
Status of the EuCARD 5.4-T REBCO Dipole Magnet
|
journal
|
June 2016 |
Superconducting Accelerator Magnets Based on High-Temperature Superconducting Bi-2212 Round Wires
|
journal
|
June 2020 |
Symmetric tape round REBCO wire with J e (4.2 K, 15 T) beyond 450 A mm −2 at 15 mm bend radius: a viable candidate for future compact accelerator magnet applications
|
journal
|
March 2018 |
Mathematical formulation to predict the harmonics of the superconducting Large Hadron Collider magnets
|
journal
|
January 2006 |
Realization and First Test Results of the EuCARD 5.4-T REBCO Dipole Magnet
|
journal
|
April 2018 |
Superconducting double-helix accelerator magnets
|
conference
|
January 2003 |
Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnation
|
journal
|
September 2010 |
20 T Hybrid Nb3Sn-HTS Block-Coil Designs for a Future Particle Collider
|
journal
|
September 2022 |
Heating-Induced Performance Degradation of REBa2Cu3O7–x Coated Conductors: An Oxygen Out-Diffusion Scenario with Two Activation Energies
|
journal
|
February 2022 |
A viable dipole magnet concept with REBCO CORC ® wires and further development needs for high-field magnet applications
|
journal
|
March 2018 |
Design and test of a curved superconducting dipole magnet for proton therapy
- Brouwer, L.; Caspi, S.; Edwards, K.
-
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 957
https://doi.org/10.1016/j.nima.2020.163414
|
journal
|
March 2020 |
Degradation Free Vacuum Epoxy Impregnated short REBCO Undulator Magnets
|
journal
|
December 2017 |
Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K
|
journal
|
April 2018 |
YBa 2 Cu 3 O 7−δ coated conductor cabling for low ac-loss and high-field magnet applications
|
journal
|
April 2009 |
Quench Detection and Protection for High-Temperature Superconductor Accelerator Magnets
|
journal
|
August 2021 |
Superconducting and Resistive Tilted Coil Magnets for Generation of High and Uniform Transverse Magnetic Field
|
journal
|
June 2005 |
Removal of degradation of the performance of an epoxy impregnated YBCO-coated conductor double pancake coil by using a polyimide-electrodeposited YBCO-coated conductor
|
journal
|
June 2012 |
Conceptual design of high transverse field magnets at the NHMFL
|
journal
|
March 2002 |
Engineering of second generation HTS coated conductor architecture to enhance the normal zone propagation velocity in various operating conditions
|
journal
|
May 2017 |
HTS twisted stacked-tape cable conductor
|
journal
|
December 2011 |
Introduction of CORC ® wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applications
|
journal
|
November 2016 |
Modeling and simulation of termination resistances in superconducting cables
|
journal
|
November 2014 |
Degradation free epoxy impregnation of REBCO coils and cables
|
journal
|
March 2013 |
Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC
|
journal
|
April 2018 |
Canted–Cosine–Theta Magnet (CCT)—A Concept for High Field Accelerator Magnets
|
journal
|
June 2014 |
A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors
|
journal
|
April 2019 |
Accelerator-Quality HTS Dipole Magnet Demonstrator Designs for the EuCARD-2 5-T 40-mm Clear Aperture Magnet
|
journal
|
June 2015 |
Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets
|
journal
|
September 2022 |
Multipole magnets for the HIAF fragment separator using the Canted-Cosine-Theta (CCT) geometry
|
journal
|
January 2020 |
The double-helix dipole-a novel approach to accelerator magnet design
|
journal
|
June 2003 |
Hi-Lumi LHC Twin Aperture Orbit Correctors 0.5-m Model Magnet Development and Cold Test
|
journal
|
April 2018 |
Status of the Nb$_{3}$Sn Canted-Cosine-Theta Dipole Magnet Program at Lawrence Berkeley National Laboratory
|
journal
|
September 2022 |
Modeling-Driven Optimization of Mechanically Robust REBCO Tapes and Wires
|
journal
|
August 2019 |
Status of CORC ® cables and wires for use in high-field magnets and power systems a decade after their introduction
|
journal
|
February 2019 |
Assembly and Mechanical Analysis of the Canted-Cosine-Theta Subscale Magnets
|
journal
|
September 2022 |
Degradation of REBCO coated conductors due to a combination of epoxy impregnation, thermal cycles, and quench: Characteristics and a method of alleviation
|
journal
|
November 2020 |
Quench detection method for 2G HTS wire
|
journal
|
February 2010 |
Oxygen out-diffusion in REBCO coated conductor due to heating
|
journal
|
May 2021 |
Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC losses
|
journal
|
September 2020 |
Towards 20 T Hybrid Accelerator Dipole Magnets
|
journal
|
September 2022 |
The EuCARD-2 Future Magnets European Collaboration for Accelerator-Quality HTS Magnets
|
journal
|
June 2015 |
CORC $^{\circledR}$ cable terminations with integrated Hall arrays for quench detection
|
journal
|
August 2020 |
Fiber optic quench detection for large-scale HTS magnets demonstrated on VIPER cable during high-fidelity testing at the SULTAN facility
|
journal
|
February 2021 |
Test of a NbTi Superconducting Quadrupole Magnet Based on Alternating Helical Windings
|
journal
|
June 2009 |
Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC ® wires
|
journal
|
December 2020 |
Introduction of the next generation of CORC ® wires with engineering current density exceeding 650 A mm −2 at 12 T based on SuperPower’s ReBCO tapes containing substrates of 25 μ m thickness
|
journal
|
February 2020 |
Optimized and practical electrical joints for CORC type HTS cables
|
journal
|
December 2015 |
Magnet Design Optimization for Future Hadron Colliders
|
text
|
January 2019 |
Superior critical current of Symmetric Tape Round (STAR) REBCO wires in ultra-high background fields up to 31.2 T
|
journal
|
November 2018 |
Present Status and Recent Developments of the Twisted Stacked-Tape Cable Conductor
|
journal
|
March 2016 |
Next-generation highly flexible round REBCO STAR wires with over 580 A mm −2 at 4.2 K, 20 T for future compact magnets
|
journal
|
August 2019 |
Test Results of CCT1—A 2.4 T Canted-Cosine-Theta Dipole Magnet
|
journal
|
June 2015 |
The EuCARD2 Future Magnets Program for Particle Accelerator High-Field Dipoles: Review of Results and Next Steps
|
journal
|
April 2018 |
Quench detection using Hall sensors in high-temperature superconducting CORC ® -based cable-in-conduit-conductors for fusion applications
|
journal
|
September 2020 |
Critical current retention of potted and unpotted REBCO Roebel cables under transverse pressure and thermal cycling
|
journal
|
March 2017 |
Developing a Vacuum Pressure Impregnation Procedure for CORC Wires
|
journal
|
September 2022 |
Effect of variations in terminal contact resistances on the current distribution in high-temperature superconducting cables
|
journal
|
January 2015 |
Quench detection for high temperature superconductor magnets: a novel technique based on Rayleigh-backscattering interrogated optical fibers
|
journal
|
January 2016 |
Bi-2212 Canted-Cosine-Theta Coils for High-Field Accelerator Magnets
|
journal
|
June 2015 |
First demonstration of high current canted-cosine-theta coils with Bi-2212 Rutherford cables
|
journal
|
January 2021 |
Enhancement of the transverse stress tolerance of RE BCO Roebel cables by epoxy impregnation
|
journal
|
April 2015 |
VIPER: An industrially scalable high-current high temperature superconductor cable
|
journal
|
September 2020 |
Fabrication and Electromagnetic Characterization of Ultrasmall Diameter REBCO Wires
|
journal
|
June 2017 |
A new configuration for a dipole magnet for use in high energy physics applications
|
journal
|
April 1970 |
A 1.2 T canted cos θ dipole magnet using high-temperature superconducting CORC ® wires
|
journal
|
May 2019 |
The Advantages and Challenges of Helical Coils for Small Accelerators—A Case Study
|
journal
|
April 2012 |
Nb3Sn Accelerator Magnets
|
book
|
August 2019 |
HTS Accelerator Magnet and Conductor Development in Europe
|
journal
|
February 2021 |
Effect of resin impregnation on the transverse pressure dependence of the critical current in Re BCO Roebel cables
|
journal
|
April 2019 |
Numerical investigation of current distributions around defects in high temperature superconducting CORC® cables
|
journal
|
August 2022 |
Progress in scale-up of REBCO STAR™ wire for canted cosine theta coils and future strategies with enhanced flexibility
|
journal
|
July 2020 |
Design, Construction and Test of a Model Superconducting Quadrupole for the Interaction Region of Super $B$ Factory
|
journal
|
June 2012 |
An Electric-Circuit Model on the Inter-Tape Contact Resistance and Current Sharing for REBCO Cable and Magnet Applications
|
journal
|
June 2020 |