Computer-aided tuning of silica/poly(dimethylsiloxane) composites for 3D printing process: A computational and experimental study

Lee, Kwan-Soo; Park, Chi Hoon; Labouriau, Andrea; Lee, So Young; Zhao, Jianchao

doi:10.1016/j.matchemphys.2022.126172

Computer-aided tuning of silica/poly(dimethylsiloxane) composites for 3D printing process: A computational and experimental study

Journal Article · Wed Jun 01 00:00:00 EDT 2022 · Materials Chemistry and Physics

DOI:https://doi.org/10.1016/j.matchemphys.2022.126172· OSTI ID:1961084

; ; ; Lee, So Young; Zhao, Jianchao

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: 89233218CNA000001

OSTI ID:: 1961084

Journal Information:: Materials Chemistry and Physics, Journal Name: Materials Chemistry and Physics Journal Issue: C Vol. 285; ISSN 0254-0584

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (41)

Computer simulations of poly(ethylene oxide): force field, pvt diagram and cyclization behaviour Rigby, David; Sun, Huai; Eichinger, B. E. Polymer International, Vol. 44, Issue 3 https://doi.org/10.1002/(SICI)1097-0126(199711)44:3<311::AID-PI880>3.0.CO;2-H	journal	November 1997
Direct Ink Writing of 3D Functional Materials Lewis, J. A. Advanced Functional Materials, Vol. 16, Issue 17 https://doi.org/10.1002/adfm.200600434	journal	November 2006
Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness Duoss, Eric B.; Weisgraber, Todd H.; Hearon, Keith Advanced Functional Materials, Vol. 24, Issue 31 https://doi.org/10.1002/adfm.201400451	journal	May 2014
3D Printing of Interdigitated Li-Ion Microbattery Architectures Sun, Ke; Wei, Teng-Sing; Ahn, Bok Yeop Advanced Materials, Vol. 25, Issue 33, p. 4539-4543 https://doi.org/10.1002/adma.201301036	journal	June 2013
PDMS-Based Elastomer Tuned Soft, Stretchable, and Sticky for Epidermal Electronics Jeong, Seung Hee; Zhang, Shuo; Hjort, Klas Advanced Materials, Vol. 28, Issue 28 https://doi.org/10.1002/adma.201505372	journal	May 2016
Additive Manufacturing: Unlocking the Evolution of Energy Materials Zhakeyev, Adilet; Wang, Panfeng; Zhang, Li Advanced Science, Vol. 4, Issue 10 https://doi.org/10.1002/advs.201700187	journal	July 2017
Rheology and structure of precipitated silica and poly(dimethyl siloxane) system Shim, Sang Eun; Isayev, Avraam I. Rheologica Acta, Vol. 43, Issue 2 https://doi.org/10.1007/s00397-003-0327-6	journal	March 2004
Additive manufacturing: technology, applications and research needs Guo, Nannan; Leu, Ming C. Frontiers of Mechanical Engineering, Vol. 8, Issue 3 https://doi.org/10.1007/s11465-013-0248-8	journal	May 2013
Influence of SiO2 fillers on the irradiation ageing of silicone rubbers Stevenson, I.; David, L.; Gauthier, C. Polymer, Vol. 42, Issue 22 https://doi.org/10.1016/S0032-3861(01)00470-0	journal	October 2001
Atomistic simulations on multilayer graphene reinforced epoxy composites Li, Chunyu; Browning, Andrea R.; Christensen, Stephen Composites Part A: Applied Science and Manufacturing, Vol. 43, Issue 8 https://doi.org/10.1016/j.compositesa.2012.02.015	journal	August 2012
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling Postiglione, Giovanni; Natale, Gabriele; Griffini, Gianmarco Composites Part A: Applied Science and Manufacturing, Vol. 76 https://doi.org/10.1016/j.compositesa.2015.05.014	journal	September 2015
Covalent coupling regulated thermal conductivity of poly(vinyl alcohol)/boron nitride composite film based on silane molecular structure Cheng, Hua; Zhao, Kai; Gong, Yi Composites Part A: Applied Science and Manufacturing, Vol. 137 https://doi.org/10.1016/j.compositesa.2020.106026	journal	October 2020
Experimentally guided MD simulation to enhance the shape memory behavior of polymer-based nanocomposites: Towards elaborating the underlying mechanism Amini, Mohammad; Hasheminejad, Kourosh; Montazeri, Abbas Composites Part A: Applied Science and Manufacturing, Vol. 138 https://doi.org/10.1016/j.compositesa.2020.106055	journal	November 2020
Simulation and experimental studies on the formation and evolution of hierarchical crystalline structures at the multi-melt flow interface Chen, Li-Bo; Huang, Yan-Hao; Zhao, Xin Composites Part A: Applied Science and Manufacturing, Vol. 144 https://doi.org/10.1016/j.compositesa.2020.106269	journal	May 2021
Customized composite intervertebral disc scaffolds by integrated 3D bioprinting for therapeutic implantation Wu, Dongwei; Tan, Jianwang; Yao, Lingyun Composites Part A: Applied Science and Manufacturing, Vol. 147 https://doi.org/10.1016/j.compositesa.2021.106468	journal	August 2021
Role of polymer/filler interactions in the linear viscoelasticity of poly(butylene succinate)/fumed silica nanocomposite Chen, Xun; Gug, JeongIn; Sobkowicz, Margaret J. Composites Science and Technology, Vol. 95 https://doi.org/10.1016/j.compscitech.2014.01.025	journal	May 2014
Impact of filler composition on mechanical and dynamic response of 3-D printed silicone-based nanocomposite elastomers Talley, Samantha J.; Branch, Brittany; Welch, Cynthia F. Composites Science and Technology, Vol. 198 https://doi.org/10.1016/j.compscitech.2020.108258	journal	September 2020
Highly stretchable graphene/polydimethylsiloxane composite lattices with tailored structure for strain-tolerant EMI shielding performance Wang, Zhenyu; Yang, Wenzhen; Liu, Rui Composites Science and Technology, Vol. 206 https://doi.org/10.1016/j.compscitech.2021.108652	journal	April 2021
Molecular dynamics simulations of thermodynamics and shape memory effect in CNT-epoxy nanocomposites Jian, Wei; Wang, Xiaodong; Lu, Haibao Composites Science and Technology, Vol. 211 https://doi.org/10.1016/j.compscitech.2021.108849	journal	July 2021
Additive manufacturing: scientific and technological challenges, market uptake and opportunities Tofail, Syed A. M.; Koumoulos, Elias P.; Bandyopadhyay, Amit Materials Today, Vol. 21, Issue 1 https://doi.org/10.1016/j.mattod.2017.07.001	journal	January 2018
Mixed matrix membranes containing functionalized multiwalled carbon nanotubes: Mesoscale simulation and experimental approach for optimizing dispersion Park, Chi Hoon; Tocci, Elena; Fontananova, Enrica Journal of Membrane Science, Vol. 514 https://doi.org/10.1016/j.memsci.2016.04.011	journal	September 2016
3D printed components of microbial fuel cells: Towards monolithic microbial fuel cell fabrication using additive layer manufacturing You, Jiseon; Preen, Richard J.; Bull, Larry Sustainable Energy Technologies and Assessments, Vol. 19 https://doi.org/10.1016/j.seta.2016.11.006	journal	February 2017
Phase Separation and Water Channel Formation in Sulfonated Block Copolyimide Park, Chi Hoon; Lee, Chang Hyun; Sohn, Joon-Yong The Journal of Physical Chemistry B, Vol. 114, Issue 37 https://doi.org/10.1021/jp105708m	journal	September 2010
COMPASS: An ab Initio Force-Field Optimized for Condensed-Phase ApplicationsOverview with Details on Alkane and Benzene Compounds Sun, H. The Journal of Physical Chemistry B, Vol. 102, Issue 38 https://doi.org/10.1021/jp980939v	journal	September 1998
Detailed molecular structure of a vinyl polymer glass Theodorou, Doros N.; Suter, Ulrich W. Macromolecules, Vol. 18, Issue 7 https://doi.org/10.1021/ma00149a018	journal	July 1985
Atomistic modeling of mechanical properties of polymeric glasses Theodorou, Doros N.; Suter, Ulrich W. Macromolecules, Vol. 19, Issue 1 https://doi.org/10.1021/ma00155a022	journal	January 1986
Three-dimensional printed electronics Lewis, Jennifer A.; Ahn, Bok Y. Nature, Vol. 518, Issue 7537 https://doi.org/10.1038/518042a	journal	February 2015
3D bioprinting of tissues and organs Murphy, Sean V.; Atala, Anthony Nature Biotechnology, Vol. 32, Issue 8 https://doi.org/10.1038/nbt.2958	journal	August 2014
3D printing of soft robotic systems Wallin, T. J.; Pikul, J.; Shepherd, R. F. Nature Reviews Materials, Vol. 3, Issue 6 https://doi.org/10.1038/s41578-018-0002-2	journal	May 2018
Hydrosilylation reaction of olefins: recent advances and perspectives Nakajima, Y.; Shimada, S. RSC Advances, Vol. 5, Issue 26 https://doi.org/10.1039/C4RA17281G	journal	January 2015
Determination of solubility parameters of single-walled and double-walled carbon nanotubes using a finite-length model Lee, Kunsil; Lim, Hyeong Jun; Yang, Seung Jae RSC Advances, Vol. 3, Issue 14 https://doi.org/10.1039/c3ra40382c	journal	January 2013
The role of long ranged forces in determining the structure and properties of liquid water Andrea, Tariq A.; Swope, William C.; Andersen, Hans C. The Journal of Chemical Physics, Vol. 79, Issue 9 https://doi.org/10.1063/1.446373	journal	November 1983
Molecular dynamics with coupling to an external bath Berendsen, H. J. C.; Postma, J. P. M.; van Gunsteren, W. F. The Journal of Chemical Physics, Vol. 81, Issue 8 https://doi.org/10.1063/1.448118	journal	October 1984
3D printing in aerospace and its long-term sustainability Joshi, Sunil C.; Sheikh, Abdullah A. Virtual and Physical Prototyping, Vol. 10, Issue 4 https://doi.org/10.1080/17452759.2015.1111519	journal	October 2015
Yield stress and wall slip phenomena in colloidal silica gels Walls, H. J.; Caines, S. Brett; Sanchez, Angelica M. Journal of Rheology, Vol. 47, Issue 4 https://doi.org/10.1122/1.1574023	journal	July 2003
Materials design by evolutionary optimization of functional groups in metal-organic frameworks Collins, Sean P.; Daff, Thomas D.; Piotrkowski, Sarah S. Science Advances, Vol. 2, Issue 11 https://doi.org/10.1126/sciadv.1600954	journal	November 2016
The mechanics and design of a lightweight three-dimensional graphene assembly Qin, Zhao; Jung, Gang Seob; Kang, Min Jeong Science Advances, Vol. 3, Issue 1 https://doi.org/10.1126/sciadv.1601536	journal	January 2017
Direct 4D printing via active composite materials Ding, Zhen; Yuan, Chao; Peng, Xirui Science Advances, Vol. 3, Issue 4 https://doi.org/10.1126/sciadv.1602890	journal	April 2017
Printing and Prototyping of Tissues and Scaffolds Derby, B. Science, Vol. 338, Issue 6109 https://doi.org/10.1126/science.1226340	journal	November 2012
De novo design of self-assembling helical protein filaments Shen, Hao; Fallas, Jorge A.; Lynch, Eric Science, Vol. 362, Issue 6415 https://doi.org/10.1126/science.aau3775	journal	November 2018
Effect of Surface Treated Silicon Dioxide Nanoparticles on Some Mechanical Properties of Maxillofacial Silicone Elastomer Zayed, Sara M.; Alshimy, Ahmad M.; Fahmy, Amal E. International Journal of Biomaterials, Vol. 2014 https://doi.org/10.1155/2014/750398	journal	January 2014

Similar Records

Computational Optimization of A 3D Printed Collimator

Journal Article · Tue Oct 20 00:00:00 EDT 2020 · Journal of Neutron Research · OSTI ID:1813274

Supramolecular Assembled C60-Containing Carboxylated Poly(dimethylsiloxane) Composites

Journal Article · Sat Dec 31 23:00:00 EST 2005 · Polymer · OSTI ID:914335

Tracking the chemical composition of 3D printed 94 % alumina during the thermal post-process

Journal Article · Mon Jul 01 00:00:00 EDT 2024 · Additive Manufacturing Letters · OSTI ID:2406107

Computer-aided tuning of silica/poly(dimethylsiloxane) composites for 3D printing process: A computational and experimental study

Citation Formats

References (41)

Similar Records

Related Subjects