Tracking the chemical composition of 3D printed 94 % alumina during the thermal post-process

Gomez, Sofia G.; Cillessen, Dale; Duay, Jonathon; Strong, Kevin; Sadzewicz, Katrina; MacDonald, Eric

doi:10.1016/j.addlet.2024.100225

Tracking the chemical composition of 3D printed 94 % alumina during the thermal post-process

Journal Article · Mon Jul 01 00:00:00 EDT 2024 · Additive Manufacturing Letters

DOI:https://doi.org/10.1016/j.addlet.2024.100225· OSTI ID:2406107

; Cillessen, Dale; Duay, Jonathon; Strong, Kevin; Sadzewicz, Katrina; MacDonald, Eric

Not Available

View Journal Article

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: NA0003525

OSTI ID:: 2406107

Journal Information:: Additive Manufacturing Letters, Journal Name: Additive Manufacturing Letters Journal Issue: C Vol. 10; ISSN 2772-3690

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (27)

3D Printing Transparent γ‐Alumina Porous Structures Based on Photopolymerizable Sol–Gel Inks Moshkovitz, May Yam; Paz, Danielle; Magdassi, Shlomo Advanced Materials Technologies, Vol. 8, Issue 23 https://doi.org/10.1002/admt.202300123	journal	June 2023
Synthesis and characterization of SDS assistant α-alumina structures and investigation of the effect of the calcination time on the morphology Vural, Sema; Sari, Özlem Colloid and Polymer Science, Vol. 297, Issue 1 https://doi.org/10.1007/s00396-018-4442-4	journal	November 2018
Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology Shuai, Xingan; Zeng, Yong; Li, Peiran Journal of Materials Science, Vol. 55, Issue 16 https://doi.org/10.1007/s10853-020-04503-y	journal	March 2020
Structure and Mechanical Properties of 3D-Printed Ceramic Specimens Promakhov, V. V.; Zhukov, A. S.; Vorozhtsov, A. B. Russian Physics Journal, Vol. 62, Issue 5 https://doi.org/10.1007/s11182-019-01790-0	journal	September 2019
Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process Nie, Guanglin; Li, Yehua; Sheng, Pengfei Journal of Advanced Ceramics, Vol. 10, Issue 4 https://doi.org/10.1007/s40145-021-0473-2	journal	July 2021
Surface chemical studies on alumina suspensions using ammonium poly(methacrylate) Santhiya, D.; Subramanian, S.; Natarajan, K. A. Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 164, Issue 2-3 https://doi.org/10.1016/S0927-7757(99)00347-7	journal	May 2000
Raman spectroscopic study of Ni/Al2O3 catalyst Aminzadeh, A.; Sarikhani-fard, H. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, Vol. 55, Issue 7-8 https://doi.org/10.1016/S1386-1425(98)00312-6	journal	July 1999
A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization Camargo, Italo Leite de; Morais, Mateus Mota; Fortulan, Carlos Alberto Ceramics International, Vol. 47, Issue 9 https://doi.org/10.1016/j.ceramint.2021.01.031	journal	May 2021
Manufacture of carbon-bonded alumina based on a lactose-tannin binder system via slip casting Wu, Xian; Weidner, Anja; Aneziris, Christos G. Ceramics International, Vol. 48, Issue 1 https://doi.org/10.1016/j.ceramint.2021.09.090	journal	January 2022
Effects of debinding condition on microstructure and densification of alumina ceramics shaped with photopolymerization-based additive manufacturing technology Zhang, Ling; Huang, Jingyin; Xiao, Zhuohao Ceramics International, Vol. 48, Issue 10 https://doi.org/10.1016/j.ceramint.2022.01.288	journal	May 2022
Effect of grain boundary state and grain size on the microstructure and mechanical properties of alumina obtained by SPS: A case of the amorphous layer on particle surface Boldin, M. S.; Popov, A. A.; Nokhrin, A. V. Ceramics International, Vol. 48, Issue 18 https://doi.org/10.1016/j.ceramint.2022.05.244	journal	September 2022
Vat photopolymerization of low-titanium lunar regolith simulant for optimal mechanical performance Wang, Chengyun; Gong, Huaqiang; Wei, Wei Ceramics International, Vol. 48, Issue 20 https://doi.org/10.1016/j.ceramint.2022.06.235	journal	October 2022
Influence of resin composition on rheology and polymerization kinetics of alumina ceramic suspensions for digital light processing (DLP) additive manufacturing Dang, Mengting; Yue, Xuezheng; Zhou, Guohong Ceramics International, Vol. 49, Issue 12 https://doi.org/10.1016/j.ceramint.2023.03.175	journal	June 2023
Electrically assisted continuous vat photopolymerization 3D printing for fabricating high-performance ordered graphene/polymer composites Zhang, Guangming; Song, Daosen; Jiang, Jin Composites Part B: Engineering, Vol. 250 https://doi.org/10.1016/j.compositesb.2022.110449	journal	February 2023
Vat photopolymerization of liquid, biodegradable PLGA-based oligomers as tissue scaffolds Wilts, Emily M.; Gula, Aleena; Davis, Corey European Polymer Journal, Vol. 130 https://doi.org/10.1016/j.eurpolymj.2020.109693	journal	May 2020
Phase evolution and properties of porous cordierite ceramics prepared by cordierite precursor pastes based on supportless stereolithography Li, Shijia; Bao, Chonggao; Dong, Wencai Journal of Alloys and Compounds, Vol. 922 https://doi.org/10.1016/j.jallcom.2022.166295	journal	November 2022
Fractography of zirconia-specimens made using additive manufacturing (LCM) technology Harrer, Walter; Schwentenwein, Martin; Lube, Tanja Journal of the European Ceramic Society, Vol. 37, Issue 14 https://doi.org/10.1016/j.jeurceramsoc.2017.03.018	journal	November 2017
Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives Olhero, S. M.; Torres, P. M. C.; Mesquita-Guimarães, J. Journal of Manufacturing Processes, Vol. 77 https://doi.org/10.1016/j.jmapro.2022.02.041	journal	May 2022
Effect of different sintering additives type on Vat photopolymerization 3D printing of Al2O3 ceramics Zeng, Yong; Chen, Xingfu; Sun, Lijun Journal of Manufacturing Processes, Vol. 83 https://doi.org/10.1016/j.jmapro.2022.09.022	journal	November 2022
A novel transparent ceramics from a slip-cast and vacuum sintered alumina/amorphous alumina nanocomposite powder Arastoo, E.; Movahedi, B.; Yousefian, Z. Materials Chemistry and Physics, Vol. 258 https://doi.org/10.1016/j.matchemphys.2020.123957	journal	January 2021
Influence of sintering temperature and CVI time on mechanical properties of 3D-printed alumina ceramics Li, He; Liu, Yongsheng; Liu, Yansong Materials Letters, Vol. 285 https://doi.org/10.1016/j.matlet.2020.129096	journal	February 2021
The fracture properties of metal‐ceramic composites manufactured via stereolithography Mummareddy, Bhargavi; Maravola, Michael; MacDonald, Eric International Journal of Applied Ceramic Technology, Vol. 17, Issue 2 https://doi.org/10.1111/ijac.13432	journal	October 2019
Dense, Strong, and Precise Silicon Nitride-Based Ceramic Parts by Lithography-Based Ceramic Manufacturing Altun, Altan Alpay; Prochaska, Thomas; Konegger, Thomas Applied Sciences, Vol. 10, Issue 3 https://doi.org/10.3390/app10030996	journal	February 2020
Study on CerAMfacturing of Novel Alumina Aerospike Nozzles by Lithography-Based Ceramic Vat Photopolymerization (CerAM VPP) Schwarzer-Fischer, Eric; Abel, Johannes; Sieder-Katzmann, Jan Materials, Vol. 15, Issue 9 https://doi.org/10.3390/ma15093279	journal	May 2022
Precision Control in Vat Photopolymerization Based on Pure Copper Paste: Process Parameters and Optimization Strategies Wang, Weiqu; Feng, Mengzhao; Wang, Zhiwei Materials, Vol. 16, Issue 16 https://doi.org/10.3390/ma16165565	journal	August 2023
Machine Vision-Based Surface Defect Detection Study for Ceramic 3D Printing Zhou, Jing; Li, Haili; Lu, Lin Machines, Vol. 12, Issue 3 https://doi.org/10.3390/machines12030166	journal	February 2024
Study on Debinding and Sintering Processes for Ceramics Fabricated Using Digital Light Processing (DLP) 3D Printing Sim, Jae-Ho; Koo, Bon-Keup; Jung, Minhun Processes, Vol. 10, Issue 11 https://doi.org/10.3390/pr10112467	journal	November 2022

Similar Records

Additive Manufacturing of 94% Alumina and Tracking its Chemical Signature During the Thermal Post-Process

Conference · Sat Jun 01 00:00:00 EDT 2024 · OSTI ID:2585410

Post-process annealing of large-scale 3D printed polyphenylene sulfide composites

Journal Article · Tue Jun 16 00:00:00 EDT 2020 · Additive Manufacturing · OSTI ID:1649584

On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties

Journal Article · Tue Jan 31 23:00:00 EST 2023 · MRS communications · OSTI ID:2000328

Tracking the chemical composition of 3D printed 94 % alumina during the thermal post-process

Citation Formats

References (27)

Similar Records

Related Subjects