Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Numerical and Experimental Studies of a Novel Dimpled Stepped-Lip Piston Design on Turbulent Flow Development in a Medium-Duty Diesel Engine.

Conference ·
DOI:https://doi.org/10.4271/2022-01-0400· OSTI ID:1894434
; ; ; ;

Abstract not provided.

Research Organization:
Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)
Sponsoring Organization:
USDOE National Nuclear Security Administration (NNSA)
DOE Contract Number:
NA0003525
OSTI ID:
1894434
Report Number(s):
SAND2021-13491C; 701143
Country of Publication:
United States
Language:
English

References (35)

A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine conference October 1967
OM 654 — Launch of a New Engine Family by Mercedes-Benz journal February 2016
Effect of Piston Bowl Shape and Swirl Ratio on Engine Heat Transfer in a Light-Duty Diesel Engine conference April 2014
Piston geometry effects in a light-duty, swirl-supported diesel engine: Flow structure characterization journal December 2017
Improved atomization, collision and sub-grid scale momentum coupling models for transient vaporizing engine sprays journal March 2016
Ford 2011 6.7L Power Stroke® Diesel Engine Combustion System Development conference April 2011
Large eddy simulation of in-cylinder turbulent flows in a DISI gasoline engine journal December 2014
An Assessment of Two Piston Bowl Concepts in a Medium-Duty Diesel Engine journal January 2012
Experimental and Numerical Studies of Bowl Geometry Impacts on Thermal Efficiency in a Light-Duty Diesel Engine conference April 2018
Investigation of Alternative Combustion Crossing Stoichiometric Air Fuel Ratio for Clean Diesels conference July 2007
The New Ford 6.7L V-8 Turbocharged Diesel Engine conference April 2010
Effect of combustion regime on in-cylinder heat transfer in internal combustion engines journal March 2015
A Method to Evaluate the Compression Ratio in IC Engines with Porous Thermal Barrier Coatings conference September 2018
Effects of Stepped-Lip Combustion System Design and Operating Parameters on Turbulent Flow Evolution in a Diesel Engine journal January 2020
A Computational Investigation of Stepped-Bowl Piston Geometry for a Light Duty Engine Operating at Low Load conference April 2010
Piston Bowl Design Optimization to Improve Low End Rated Torque in BS-VI Diesel Engine Based on Multi-Dimensional Combustion Simulation conference April 2020
A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling journal February 1997
Comparing the Effect of Fuel/Air Interactions in a Modern High-Speed Light-Duty Diesel Engine conference September 2017
Bowl Geometry Effects on Turbulent Flow Structure in a Direct Injection Diesel Engine conference September 2018
Investigation of the 3D flow field in an IC engine using tomographic PIV journal January 2013
A Study of Piston Geometry Effects on Late-Stage Combustion in a Light-Duty Optical Diesel Engine Using Combustion Image Velocimetry journal February 2018
The effect of a stepped lip piston design on performance and emissions from a high-speed diesel engine journal April 2018
Low Cooling Losses and Low Emission Analysis of Small Bore Diesel Engine Combustion conference September 2015
Energy Distribution Analysis in Boosted HCCI-like / LTGC Engines - Understanding the Trade-Offs to Maximize the Thermal Efficiency journal January 2015
Limitations of Sector Mesh Geometry and Initial Conditions to Model Flow and Mixture Formation in Direct-Injection Diesel Engines conference April 2019
Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency journal June 2020
Bowl Shape Design Optimization for Engine-Out PM Reduction in Heavy Duty Diesel Engine conference April 2015
Optimization of Diesel Combustion System for Reducing PM to Meet Tier4-Final Emission Regulation without Diesel Particulate Filter conference October 2013
Comparison of Linear, Non-Linear and Generalized RNG-Based k-epsilon Models for Turbulent Diesel Engine Flows conference April 2017
Role of Piston Bowl Shape to Enhance Late-Cycle Soot Oxidation in Low-Swirl Diesel Combustion journal February 2019
Piston Bowl Geometry Effects on Combustion Development in a High-Speed Light-Duty Diesel Engine conference September 2019
Mixing Enhancement by a Bump Ring in a Combustion Chamber for Compound Combustion conference October 2005
On coherent-vortex identification in turbulence journal January 2000
Catalyst-Heating Operation in a Medium-Duty Diesel Engine: Operating Strategy Calibration, Fuel Reactivity, and Fuel Oxygen Effects journal September 2021
Research and Development of Double Swirl Combustion System for a DI Diesel Engine journal July 2010

Similar Records

Related Subjects