Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Importance of multimodal characterization and influence of residual Li2S impurity in amorphous Li3PS4 inorganic electrolytes

Journal Article · · Journal of Materials Chemistry. A
DOI:https://doi.org/10.1039/d1ta02754a· OSTI ID:1840904

Amorphous Li3PS4 (LPS) solid-state electrolytes are promising for energy-dense lithium metal batteries. LPS glass, synthesized from a 3:1 mol ratio of Li2S and P2S5, has high ionic conductivity and can be synthesized by ball milling or solution processing. Ball milling has been attractive because it provides the easiest route to access amorphous LPS with a conductivity of 3.5 × 10–4 S cm–1 (20 °C). However, achieving the complete reaction of precursors via ball milling can be difficult, and most literature reports use X-ray diffraction (XRD) or Raman spectroscopy to confirm sample purity, both of which have limitations. Furthermore, the effect of residual precursors on ionic conductivity and lithium metal cycling is unknown. In this work, we illustrate the importance of multimodal characterization to determine LPS phase and chemical purity. To determine the residual Li2S content in LPS, we show that (1) XRD and 31P solid state nuclear magnetic resonance (ssNMR) are insufficient and (2) Raman loses sensitivity at concentrations below 12 mol% Li2S. Most importantly, we show that 7Li ssNMR is highly sensitive. Using 7Li ssNMR, we investigate the effect of ball milling parameters and develop a robust and highly reproducible procedure for pure LPS synthesis. We find that as the residual Li2S precursor content increases, LPS conductivity decreases and lithium metal batteries exhibit higher overpotentials and poor cycle life. Furthermore, our work reveals the importance of multimodal characterization techniques for amorphous solid-state electrolyte characterization and will enable better synthetic strategies for highly conductive electrolytes for efficient energy-dense solid-state lithium metal batteries.

Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States)
Sponsoring Organization:
Univ. of Chicago, Materials Research Science & Engineering Center (MRSEC)
Grant/Contract Number:
AC02-06CH11357
OSTI ID:
1840904
Journal Information:
Journal of Materials Chemistry. A, Journal Name: Journal of Materials Chemistry. A Journal Issue: 35 Vol. 9; ISSN 2050-7488
Publisher:
Royal Society of ChemistryCopyright Statement
Country of Publication:
United States
Language:
English

References (75)

New, Highly Ion-Conductive Crystals Precipitated from Li2S-P2S5 Glasses journal April 2005
In Situ Li 3 PS 4 Solid-State Electrolyte Protection Layers for Superior Long-Life and High-Rate Lithium-Metal Anodes journal October 2018
Sulfide‐Based Solid‐State Electrolytes: Synthesis, Stability, and Potential for All‐Solid‐State Batteries journal August 2019
Compliant Yet Brittle Mechanical Behavior of Li 2 S-P 2 S 5 Lithium-Ion-Conducting Solid Electrolyte journal January 2017
Sulfide Solid Electrolytes for Lithium Battery Applications journal August 2018
Nonpolar Alkanes Modify Lithium‐Ion Solvation for Improved Lithium Deposition and Stripping journal September 2019
Correlating Macro and Atomic Structure with Elastic Properties and Ionic Transport of Glassy Li 2 S‐P 2 S 5 (LPS) Solid Electrolyte for Solid‐State Li Metal Batteries journal April 2020
Li 2 S–Li 3 PS 4 (LPS) Composite Synthesized by Liquid‐Phase Shaking for All‐Solid‐State Lithium–Sulfur Batteries with High Performance journal April 2020
Porphyrin polymers and organic frameworks: Porphyrin polymers and organic frameworks journal April 2015
Theoretical studies of the infrared and Raman spectra of P4S10 journal September 1999
Formation of superionic crystals from mechanically milled Li2S–P2S5 glasses journal February 2003
Localized High-Concentration Sulfone Electrolytes for High-Efficiency Lithium-Metal Batteries journal August 2018
Organic-inorganic hybrid solid electrolytes for solid-state lithium cells operating at room temperature journal November 2016
Recent development of sulfide solid electrolytes and interfacial modification for all-solid-state rechargeable lithium batteries journal March 2013
Formation and structure of Na2S+P2S5 amorphous materials prepared by melt-quenching and mechanical milling journal January 2012
Lithium conduction and the role of alkaline earth cations in Li2S–P2S5–MS (M = Ca, Sr, Ba) glasses journal June 2020
High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes journal August 2018
Nanoscale Mapping of Extrinsic Interfaces in Hybrid Solid Electrolytes journal January 2020
The Electrolyte Frontier: A Manifesto journal February 2020
All-solid-state lithium secondary batteries using sulfide-based glass–ceramic electrolytes journal September 2006
Mechanochemical synthesis of hybrid electrolytes from the Li2S–P2S5 glasses and polyethers journal December 2006
All-solid-state lithium batteries with Li3PS4 glass as active material journal October 2015
A new solid polymer electrolyte incorporating Li10GeP2S12 into a polyethylene oxide matrix for all-solid-state lithium batteries journal January 2016
Electrochemical performance of a solvent-free hybrid ceramic-polymer electrolyte based on Li 7 La 3 Zr 2 O 12 in P(EO) 15 LiTFSI journal June 2017
Hybrid electrolytes for lithium metal batteries journal July 2018
Li7P3S11/poly(ethylene oxide) hybrid solid electrolytes with excellent interfacial compatibility for all-solid-state batteries journal October 2018
A preliminary investigation of fracture toughness of Li7La3Zr2O12 and its comparison to other solid Li-ionconductors journal April 2013
In Situ Investigation of Chemomechanical Effects in Thiophosphate Solid Electrolytes journal December 2020
Structural change of Li2S–P2S5 sulfide solid electrolytes in the atmosphere journal February 2011
Lithium ion diffusion in solid electrolyte (Li2S)7(P2S5)3 measured by pulsed-gradient spin-echo 7Li NMR spectroscopy journal May 2013
The “filler effect”: A study of solid oxide fillers with β-Li3PS4 for lithium conducting electrolytes journal December 2015
Solvent-Mediated Synthesis of Amorphous Li 3 PS 4 /Polyethylene Oxide Composite Solid Electrolytes with High Li + Conductivity journal September 2020
Stack Pressure Effect in Li 3 PS 4 and Na 3 PS 4 Based Alkali Metal Solid-State Cells: The Dramatic Implication of Interlayer Growth journal December 2020
One-Electron Mechanism in a Gel–Polymer Electrolyte Li–O 2 Battery journal September 2016
Materials Synthesis Insights from Scientific Literature via Text Extraction and Machine Learning journal October 2017
Understanding the Effect of Interlayers at the Thiophosphate Solid Electrolyte/Lithium Interface for All-Solid-State Li Batteries journal November 2018
Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction journal December 2015
Li + -Ion Dynamics in β-Li 3 PS 4 Observed by NMR: Local Hopping and Long-Range Transport journal June 2018
Amorphous versus Crystalline Li 3 PS 4 : Local Structural Changes during Synthesis and Li Ion Mobility journal April 2019
High-Performance All-Solid-State Lithium–Sulfur Battery Enabled by a Mixed-Conductive Li 2 S Nanocomposite journal June 2016
High Ionic Conductivity of Liquid-Phase-Synthesized Li 3 PS 4 Solid Electrolyte, Comparable to That Obtained via Ball Milling journal February 2021
Hot Pressed, Fiber-Reinforced (Li 2 S) 70 (P 2 S 5 ) 30 Solid-State Electrolyte Separators for Li Metal Batteries journal April 2019
Enabling Thin and Flexible Solid-State Composite Electrolytes by the Scalable Solution Process journal August 2019
Properties of the Interphase Formed between Argyrodite-Type Li 6 PS 5 Cl and Polymer-Based PEO 10 :LiTFSI journal October 2019
Electrolytes and Interphases in Li-Ion Batteries and Beyond journal October 2014
A New Class of Ionically Conducting Fluorinated Ether Electrolytes with High Electrochemical Stability journal April 2020
The Structure of GeS 2 -P 2 S 5 Glasses journal October 2002
A solid future for battery development journal September 2016
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries journal March 2017
Reviving the lithium metal anode for high-energy batteries journal March 2017
High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes journal January 2019
Advances and issues in developing salt-concentrated battery electrolytes journal March 2019
Monolithic solid–electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization journal September 2019
High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes journal March 2020
Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries journal June 2020
From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries journal March 2020
Liquid-phase syntheses of sulfide electrolytes for all-solid-state lithium battery journal February 2019
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery journal July 2013
Analysis of the structure and degree of crystallisation of 70Li 2 S–30P 2 S 5 glass ceramic journal January 2015
Transition of lithium growth mechanisms in liquid electrolytes journal January 2016
Fabrication of ultrathin solid electrolyte membranes of β-Li 3 PS 4 nanoflakes by evaporation-induced self-assembly for all-solid-state batteries journal January 2016
Lithium ion conductivity in Li 2 S–P 2 S 5 glasses – building units and local structure evolution during the crystallization of superionic conductors Li 3 PS 4 , Li 7 P 3 S 11 and Li 4 P 2 S 7 journal January 2017
Solution-based synthesis of lithium thiophosphate superionic conductors for solid-state batteries: a chemistry perspective journal January 2019
Data-driven materials research enabled by natural language processing and information extraction journal December 2020
Compliant glass–polymer hybrid single ion-conducting electrolytes for lithium batteries journal December 2015
Preparation of Li2S-P2S5 Amorphous Solid Electrolytes by Mechanical Milling journal February 2001
Characterization of Solid Electrolytes Prepared from Li[sub 2]S–P[sub 2]S[sub 5] Glass and Ionic Liquids journal January 2010
Review—Interfaces: Key Issue to Be Solved for All Solid-State Lithium Battery Technologies journal March 2020
All Solid-State Lithium–Sulfur Battery Using a Glass-Type P 2 S 5 –Li 2 S Electrolyte: Benefits on Anode Kinetics journal January 2015
Evaluating the Effects of Temperature and Pressure on Li/PEO-LiTFSI Interfacial Stability and Kinetics journal January 2018
High-Temperature Performance of All-Solid-State Lithium-Metal Batteries Having Li/Li 3 PS 4 Interfaces Modified with Au Thin Films journal January 2018
Controlling Ionic Transport through the PEO-LiTFSI/LLZTO Interface journal January 2019
Preparation of Li3PS4 Solid Electrolyte by Liquid-Phase Shaking Using Organic Solvents with Carbonyl Group as Complex Forming Medium journal January 2016
NMR Investigations of Crystalline and Glassy Solid Electrolytes for Lithium Batteries: A Brief Review journal May 2020
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review journal August 2020