Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Lithium Dendrite-Free Li7N2I-LiOH Solid Electrolytes for High Energy Lithium Batteries

Technical Report ·
DOI:https://doi.org/10.2172/2479519· OSTI ID:2479519
 [1];  [1];  [1]
  1. Univ. of Maryland, College Park, MD (United States)

All-solid-state lithium batteries (ASSLBs) hold great potential to improve the safety and energy density of today’s lithium-ion batteries by using non-flammable inorganic solid electrolytes. Solid electrolytes (SEs) are believed to prevent Li dendrite growth because of high mechanical strength and high Li+ transference numbers. Significant advances in SE have been achieved, among which, Li7La3Zr2O12 (LLZO) and Li2S–P2S5 (LPS) are the most promising SEs for bulk-type solid-state lithium batteries because of high ionic conductivities (>10-4 S/cm2). However, in contrast to our expectations, the growth of lithium dendrites is not suppressed but is facilitated in LLZOs and LPSs regardless of dopants, porosity, and crystallinity of the electrolytes. Despite the unity Li transference number and over two-times of shear modulus than that of Li metal, the critical current densities for Li plating and stripping in these SEs are less than 1.0 mA cm-2, which is one-fourth to one-tenth of that in liquid electrolytes at room temperature. The incompatibility between LLZO and LPS with Li metal seriously limits the energy density of all-solid-state batteries. The mechanism for lithium dendrite formation and growth in SEs are still disputable. Lack of understanding of the Li dendrite formation mechanism seriously impeded the development of solid-state lithium batteries. The development of the criterion for Li dendrite suppression is essential for the success of solid electrolyte lithium batteries. In this project, a criterion for Li dendrite suppression will be developed through thermodynamics and kinetics analysis of lithium dendrite nucleation/growth, which will guide the solid-state electrolyte design. Li7N2I-LiOH, Li5NI2-LiOH and Li3YCl6 solid electrolyte with high ionic conductivity and low electronic conductivity were used to validate the criterion for lithium dendrite suppression. Different surface modifications were also explored to enhance the dendrite suppression capability of SSEs.

Research Organization:
Univ. of Maryland, College Park, MD (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
DOE Contract Number:
EE0008856
OSTI ID:
2479519
Report Number(s):
DOE-UMD--8856
Country of Publication:
United States
Language:
English

Similar Records

VTO FY23 Annual Progress Report on 3D Printing of All-Solid-State Lithium Batteries
Technical Report · Thu Nov 16 23:00:00 EST 2023 · OSTI ID:2429655

High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes
Journal Article · Sun Jan 13 23:00:00 EST 2019 · Nature Energy · OSTI ID:1557527

Solid‐State Electrolyte Design for Lithium Dendrite Suppression
Journal Article · Fri Oct 09 00:00:00 EDT 2020 · Advanced Materials · OSTI ID:1804192