Downwind coning concept rotor for a 25 MW offshore wind turbine
- Univ. of Virginia, Charlottesville, VA (United States)
- Colorado State Univ., Fort Collins, CO (United States)
- Univ. of Texas at Dallas, Richardson, TX (United States)
- Univ. of Illinois at Urbana-Champaign, IL (United States)
- RRD Engineering (United States)
The size of offshore wind turbines over the next decade is expected to continually increase due to reduced balance of station costs per MW and also the higher wind energy at increased altitudes that can lead to higher capacity factors. However, there are challenges that may limit the degree of upscaling which is possible. In this paper, a two-bladed downwind turbine system is upscaled from 13.2 MW to 25 MW, by redesigning aerodynamics, structures, and controls. In particular, three 25 MW rotors have been developed: V1 is the upscaled model, V2 is a partial redesigned model, and V3 is a fully redesigned model. Despite their radically large sizes, it is found that these 25 MW turbine rotors satisfy this limited set of design drivers at the rated condition and that larger blade lengths are possible with cone-wise load-alignment. In addition, flapwise morphing (varying the cone angle with a wind-speed schedule) is investigated in terms of minimizing mean and fluctuating root bending loads using steady inflow proxies for the maximum and damage equivalent load moments. The resulting series of 25 MW rotors, which are the largest ever designed, can be a useful baseline for additional development and assessment.
- Research Organization:
- Univ. of Virginia, Charlottesville, VA (United States)
- Sponsoring Organization:
- USDOE Advanced Research Projects Agency - Energy (ARPA-E)
- Grant/Contract Number:
- AR0000667
- OSTI ID:
- 1799055
- Alternate ID(s):
- OSTI ID: 1616335
- Journal Information:
- Renewable Energy, Vol. 156, Issue C; ISSN 0960-1481
- Publisher:
- ElsevierCopyright Statement
- Country of Publication:
- United States
- Language:
- English
Web of Science
Similar Records
Parked aeroelastic field rotor response for a 20% scaled demonstrator of a 13‐MW downwind turbine
Morphing Downwind-Aligned Rotor Concept Based on a 13-MW Wind Turbine