Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Parked aeroelastic field rotor response for a 20% scaled demonstrator of a 13‐MW downwind turbine

Journal Article · · Wind Energy
DOI:https://doi.org/10.1002/we.2794· OSTI ID:1901470
 [1];  [1];  [2];  [2];  [3]
  1. Department of Mechanical and Aerospace Engineering University of Virginia Charlottesville Virginia USA
  2. National Renewable Energy Laboratory Golden Colorado USA
  3. University of Illinois at Urbana‐Champaign Urbana Illinois USA
Abstract

Aeroelastic parked testing of a unique downwind two‐bladed subscale rotor was completed to characterize the response of an extreme‐scale 13‐MW turbine in high‐wind parked conditions. A 20% geometric scaling was used resulting in scaled 20‐m‐long blades, whose structural and stiffness properties were designed using aeroelastic scaling to replicate the nondimensional structural aeroelastic deflections and dynamics that would occur for a lightweight, downwind 13‐MW rotor. The subscale rotor was mounted and field tested on the two‐bladed Controls Advanced Research Turbine (CART2) at the National Renewable Energy Laboratory's Flatiron Campus (NREL FC). The parked testing of these highly flexible blades included both pitch‐to‐run and pitch‐to‐feather configurations with the blades in the horizontal braked orientation. The collected experimental data includes the unsteady flapwise root bending moments and tip deflections as a function of inflow wind conditions. The bending moments are based on strain gauges located in the root section, whereas the tip deflections are captured by a video camera on the hub of the turbine pointed toward the tip of the blade. The experimental results are compared against computational predictions generated by FAST, a wind turbine simulation software, for the subscale and full‐scale models with consistent unsteady wind fields. FAST reasonably predicted the bending moments and deflections of the experimental data in terms of both the mean and standard deviations. These results demonstrate the efficacy of the first such aeroelastically scaled turbine test and demonstrate that a highly flexible lightweight downwind coned rotor can be designed to withstand extreme loads in parked conditions.

Research Organization:
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
Sponsoring Organization:
USDOE; USDOE Advanced Research Projects Agency - Energy (ARPA-E)
Grant/Contract Number:
AC36-08GO28308; AR0000667
OSTI ID:
1901470
Alternate ID(s):
OSTI ID: 1905790
OSTI ID: 1995931
Report Number(s):
NREL/JA-5000-80696
Journal Information:
Wind Energy, Journal Name: Wind Energy Journal Issue: 2 Vol. 26; ISSN 1095-4244
Publisher:
Wiley Blackwell (John Wiley & Sons)Copyright Statement
Country of Publication:
United Kingdom
Language:
English

References (22)

Investigation of potential extreme load reduction for a two‐bladed upwind turbine with partial pitch journal June 2014
A morphing downwind-aligned rotor concept based on a 13-MW wind turbine: A morphing downwind-aligned wind turbine rotor concept journal May 2015
Design and model confirmation of the intermediate scale VolturnUS floating wind turbine subjected to its extreme design conditions offshore Maine: Design and model validation of VolturnUS floating wind turbine journal September 2015
Downwind pre-aligned rotors for extreme-scale wind turbines: Downwind pre-aligned rotors for extreme-scale wind turbines journal January 2017
Tower shadow induced blade loads for an extreme‐scale downwind turbine journal December 2019
Full-scale modal wind turbine tests: comparing shaker excitation with wind excitation book January 2011
Wind tunnel testing of scaled wind turbine models: Beyond aerodynamics journal April 2014
Aerodynamic and aeroelastic characteristics of flexible wind turbine blades under periodic unsteady inflows journal February 2020
Pre-aligned downwind rotor for a 13.2 MW wind turbine journal February 2018
Ground testing of a 1% gravo-aeroelastically scaled additively-manufactured wind turbine blade with bio-inspired structural design journal April 2020
A gravo-aeroelastically scaled wind turbine rotor at field-prototype scale with strict structural requirements journal August 2020
Methodology for Wind/Wave Basin Testing of Floating Offshore Wind Turbines
  • Martin, Heather R.; Kimball, Richard W.; Viselli, Anthony M.
  • Journal of Offshore Mechanics and Arctic Engineering, Vol. 136, Issue 2 https://doi.org/10.1115/1.4025030
journal March 2014
Experimental Comparison of Three Floating Wind Turbine Concepts journal March 2014
Model Test of a 1:8-Scale Floating Wind Turbine Offshore in the Gulf of Maine1 journal May 2015
Definition of a 5-MW Reference Wind Turbine for Offshore System Development report February 2009
Predicting ultimate loads for wind turbine design conference January 1999
Morphing Segmented Wind Turbine Concept conference June 2010
Segmented Ultralight Pre-Aligned Rotor for Extreme-Scale Wind Turbines conference November 2012
Low Mass, Morphing Rotor for Extreme Scale Wind Turbines conference January 2017
Aerodynamic Design of the 13.2 MW SUMR-13i Wind Turbine Rotor conference January 2018
Design and Testing of a Scaled Demonstrator Turbine at the National Wind Technology Center conference January 2019
Force Measurements on a VAWT Blade in Parked Conditions journal November 2017

Similar Records

Gravo-aeroelastic scaling of a 13-MW downwind rotor for 20% scale blades
Journal Article · Mon Sep 28 20:00:00 EDT 2020 · Wind Energy · OSTI ID:1668879