Multijunction InGaAs thermophotovoltaic power converter
Conference
·
OSTI ID:177667
The experimental performance of a multijunction monolithic In(0.53)Ga(0.47)As power converter under blackbody irradiation is reported. Eight InGaAs PN junctions grown epitaxially on a semi-insulating wafer were monolithically integrated in series to boost the approximately 0.4 V photovoltage per typical InGaAs junction to over 3 volts for the 1 sq cm chip. This chip was originally designed and characterized for free-space 1.3 micron laser power beaming. This is the first report of such a multijunction TPV. This is not a traditional tandem cell in which the junctions are stacked vertically. The junctions are each about 1mm long by 1 cm wide and are laterally connected across the 1 sq cm device area. This multijunction design has the potential for lower I(sup 2)R power loss since the smaller PN junction area limits the current to one-eighth that of the equivalent surface area. In essence, the current is traded for voltage to avoid the I(sup 2)R loss, analogous to the way power utilities avoid I(sup 2)R loss in high-tension power lines, by transforming the high current, low voltage generated at a power plant into a high voltage at a low current before transmitting the power over great distances.
- Research Organization:
- National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center
- OSTI ID:
- 177667
- Report Number(s):
- N--96-15042; NASA-CP--10180; NAS--1.55:10180; E--9943; NIPS--95-05337; CONF-9510288--
- Country of Publication:
- United States
- Language:
- English
Similar Records
P/N In(Al) GaAs multijunction laser power converters
Multijunction InGaAs thermophotovoltaic devices
Low bandgap InGaAs thermophotovoltaic cells
Conference
·
Thu Sep 01 00:00:00 EDT 1994
·
OSTI ID:36445
Multijunction InGaAs thermophotovoltaic devices
Conference
·
Wed Dec 30 23:00:00 EST 1998
·
OSTI ID:323667
Low bandgap InGaAs thermophotovoltaic cells
Conference
·
Mon Dec 30 23:00:00 EST 1996
·
OSTI ID:435549