Robust and Spectrally Selective Aerogels for Solar Receivers (Final Technical Report)
The development of next generation concentrated solar thermal (CST) plants requires solar receivers to reach high temperatures (> 600°C) while minimizing costs. Efficiently generating such high temperatures using a line-focusing collector and an air-stable receiver has the potential to change the current CSP paradigm because it would: (1) result in large improvements in system-level efficiency of line-focusing systems by enabling the use of high-efficiency supercritical CO2 power cycles; (2) decrease the LCOE of line-focusing systems to meet SETO 2030 goals; (3) maintain performance over the lifetime of the CSP plant by avoiding issues related to breakdown of vacuum. The use of aerogels as transparent insulating materials (TIMs) in solar thermal receivers has the potential to enable such improvements. Specifically, aerogels can be placed in front of a black (or partially selective) high-temperature absorber to allow sunlight to transmit to the absorber but block heat from escaping. These materials can improve the efficiency and simplify the complexity of thermal transport systems by enabling operation at moderate or no vacuum levels. These potential benefits have been explicitly identified by SETO as ‘high impact’. The use of mesoporous silica as a TIM has already led to large improvements in solar collection efficiency. Nevertheless, these materials inherently lose structural integrity and the ability to suppress radiation losses at high temperatures. Here, we address these challenges by leveraging 1-cycle atomic layer deposition of aluminum oxide onto a silica aerogel to form a thermally stable interfacial layer that is transparent to sunlight but broadly absorbs in the mid-infrared. This interfacial absorption results in a two-fold reduction in measured heat losses from an absorber at 700°C and solar thermal efficiency of 81% at 700°C under 60 Suns, based on measurements of heat loss and solar transmittance. Extended-duration heat treatment reveals that the multicomponent aerogel is stable at high temperatures relative to a silica aerogel. Furthermore, we experimentally demonstrate the concept of using infrared plasmon resonances to selectively enhance the thermal absorption coefficient of TIMs in order to strongly suppress thermal radiative losses at high temperatures. We term this mechanism plasmon-enhanced greenhouse selectivity (PEGS). Unlike silica aerogels, where much of the IR absorption is lost at high temperatures, local surface plasmon resonances (LSPRs) in doped oxide nanoparticles overlap a significant portion of the blackbody spectrum and are maintained at high temperatures. Overall, this work paves the way for next-generation solar thermal energy using thermally robust transparent insulating materials.
- Research Organization:
- Univ. of Michigan, Ann Arbor, MI (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Solar Energy Technologies Office
- DOE Contract Number:
- EE0008526
- OSTI ID:
- 1771294
- Report Number(s):
- DOE-UM-08526
- Resource Relation:
- Related Information: This FTR is a new version of 1695485
- Country of Publication:
- United States
- Language:
- English
Plasmon-Enhanced Greenhouse Selectivity for High-Temperature Solar Thermal Energy Conversion
|
journal | August 2020 |
Similar Records
Transparent Refractory Aerogels for Efficient Spectral Control in High–Temperature Solar Power Generation
High-Temperature Linear Receiver Enabled by Multicomponent Aerogels