An Asymmetric Elasto-Plastic Phase-Field Model for Shape Memory Effect, Pseudoelasticity and Thermomechanical Training in Polycrystalline Shape Memory Alloys

Cissé, Cheikh; Asle Zaeem, Mohsen

doi:10.1016/j.actamat.2020.10.034

Title: An Asymmetric Elasto-Plastic Phase-Field Model for Shape Memory Effect, Pseudoelasticity and Thermomechanical Training in Polycrystalline Shape Memory Alloys

Journal Article · Tue Dec 01 00:00:00 EST 2020 · Acta Materialia

DOI:https://doi.org/10.1016/j.actamat.2020.10.034· OSTI ID:1771193

Cissé, Cheikh;

We propose an elasto-plastic phase-field model (PFM) to conduct the first microscopic computational study of shape memory effect (SME), pseudoelasticity, stress assisted two-way memory effect (SATWME), and thermomechanical training of CuAlBe shape memory alloy (SMA). This non-isothermal PFM model considers the effects of temperature dependent properties, latent heat, grain boundaries, and asymmetric transformation and plasticity. PFM simulations demonstrate the capacity of our model to capture the thermomechanical and purely mechanical shape recovery in the SMA. When considering transforming grain boundaries, grain refinement generates a higher transformation stress, a steeper transformation hardening, and smaller hysteresis loops for both SME and pseudoelasticity. The results also point out slightly higher transformation stress when geometrical grain boundaries are used. The simulations of SATWME highlight an augmentation of the residual martensite as the hold stress increases, which is consistent with experimental observations. This is the first PFM that can mimic the thermal training within several SATWME cycles, showing an asymptotic increase of plastic strain and the related retained transformation strain until the fourth cycle, and their stabilization thereafter. The activation of plasticity occurs always after initiation of phase transformation. Although plasticity results in more stress relaxation, it deteriorates the shape recovery for both SME and pseudoelasticity by hindering the reverse transformation. Comparison between tension and compression demonstrates the capacity of this PFM to account for, for the first time, the nonsymmetrical transformation and plastic responses of SMAs.

View Journal Article

Cite

Export

Save

Research Organization:: Colorado School of Mines, Golden, CO (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: SC0019279

OSTI ID:: 1771193

Alternate ID(s):: OSTI ID: 1853007

Journal Information:: Acta Materialia, Journal Name: Acta Materialia Vol. 201 Journal Issue: C; ISSN 1359-6454

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (110)

A comprehensive energy approach to predict fatigue life in CuAlBe shape memory alloy Sameallah, S.; Legrand, V.; Saint-Sulpice, L. Smart Materials and Structures, Vol. 24, Issue 2 https://doi.org/10.1088/0964-1726/24/2/025004	journal	December 2014
Effect of martensite embryo potency on the martensitic transformations in steels—A 3D phase-field study Yeddu, Hemantha Kumar; Borgenstam, Annika; Ågren, John Journal of Alloys and Compounds, Vol. 577 https://doi.org/10.1016/j.jallcom.2012.01.087	journal	November 2013
Analytical model for the torsional response of superelastic shape memory alloy circular sections subjected to a loading-unloading cycle Viet, N. V.; Zaki, W.; Umer, R. International Journal of Solids and Structures, Vol. 156-157 https://doi.org/10.1016/j.ijsolstr.2018.08.001	journal	January 2019
Microscale phase field modeling of the martensitic transformation during cyclic loading of NiTi single crystal Esfahani, S. Ehsan; Ghamarian, Iman; Levitas, Valery I. International Journal of Solids and Structures, Vol. 146 https://doi.org/10.1016/j.ijsolstr.2018.03.022	journal	August 2018
Multifunctional materials: engineering applications and processing challenges Salonitis, Konstantinos; Pandremenos, John; Paralikas, John The International Journal of Advanced Manufacturing Technology, Vol. 49, Issue 5-8 https://doi.org/10.1007/s00170-009-2428-6	journal	December 2009
A phase-field model for non-isothermal phase transformation and plasticity in polycrystalline yttria-stabilized tetragonal zirconia Cissé, Cheikh; Asle Zaeem, Mohsen Acta Materialia, Vol. 191 https://doi.org/10.1016/j.actamat.2020.03.025	journal	June 2020
Phase field study of the microstructure evolution and thermomechanical properties of polycrystalline shape memory alloys: Grain size effect and rate effect Sun, Yuanzun; Luo, Jun; Zhu, Jingming Computational Materials Science, Vol. 145 https://doi.org/10.1016/j.commatsci.2018.01.014	journal	April 2018
A review of computational modeling techniques in study and design of shape memory ceramics Asle Zaeem, Mohsen; Zhang, Ning; Mamivand, Mahmood Computational Materials Science, Vol. 160 https://doi.org/10.1016/j.commatsci.2018.12.062	journal	April 2019
Shape memory effect and pseudoelasticity behavior in tetragonal zirconia polycrystals: A phase field study Mamivand, Mahmood; Asle Zaeem, Mohsen; El Kadiri, Haitham International Journal of Plasticity, Vol. 60 https://doi.org/10.1016/j.ijplas.2014.03.018	journal	September 2014
Thermomechanical cyclic behavior modeling of Cu-Al-Be SMA materials and structures Saint-Sulpice, Luc; Arbab-Chirani, Shabnam; Calloch, Sylvain International Journal of Solids and Structures, Vol. 49, Issue 9 https://doi.org/10.1016/j.ijsolstr.2012.01.017	journal	May 2012
Phase field modeling for cyclic phase transition of NiTi shape memory alloy single crystal with super-elasticity Xie, Xi; Kang, Guozheng; Kan, Qianhua Computational Materials Science, Vol. 143 https://doi.org/10.1016/j.commatsci.2017.11.017	journal	February 2018
A three-dimensional non-isothermal Ginzburg–Landau phase-field model for shape memory alloys Dhote, R.; Fabrizio, M.; Melnik, R. Modelling and Simulation in Materials Science and Engineering, Vol. 22, Issue 8 https://doi.org/10.1088/0965-0393/22/8/085011	journal	November 2014
Hysteresis phenomena in shape memory alloys by non-isothermal Ginzburg–Landau models Dhote, R. P.; Fabrizio, M.; Melnik, R. N. V. Communications in Nonlinear Science and Numerical Simulation, Vol. 18, Issue 9 https://doi.org/10.1016/j.cnsns.2013.01.015	journal	September 2013
Micromechanical modelling of a CuAlNi shape memory alloy behaviour Blanc, P.; Lexcellent, C. Materials Science and Engineering: A, Vol. 378, Issue 1-2 https://doi.org/10.1016/j.msea.2003.11.065	journal	July 2004
A non-isothermal phase field study of the shape memory effect and pseudoelasticity of polycrystalline shape memory alloys Sun, Yuanzun; Luo, Jun; Zhu, Jingming Computational Materials Science, Vol. 167 https://doi.org/10.1016/j.commatsci.2019.05.036	journal	September 2019
A simplified micromechanical constitutive law adapted to the design of shape memory applications by finite element methods Peultier, B.; Ben Zineb, T.; Patoor, E. Materials Science and Engineering: A, Vol. 481-482 https://doi.org/10.1016/j.msea.2007.05.117	journal	May 2008
Measurement of local strain heterogeneities in superelastic shape memory alloys by digital image correlation Bourgeois, Nadine; Meraghni, Fodil; Zineb, Tarak Ben Physics Procedia, Vol. 10 https://doi.org/10.1016/j.phpro.2010.11.066	journal	January 2010
Describing internal subloops due to incomplete phase transformations in shape memory alloys Savi, M. A.; Paiva, A. Archive of Applied Mechanics, Vol. 74, Issue 9 https://doi.org/10.1007/s00419-005-0385-6	journal	June 2005
Phase field modeling of stress-induced tetragonal-to-monoclinic transformation in zirconia and its effect on transformation toughening Mamivand, Mahmood; Asle Zaeem, Mohsen; El Kadiri, Haitham Acta Materialia, Vol. 64 https://doi.org/10.1016/j.actamat.2013.10.031	journal	February 2014
Phase-field modeling of displacive phase transformations in elastically anisotropic and inhomogeneous polycrystals Heo, Tae Wook; Chen, Long-Qing Acta Materialia, Vol. 76 https://doi.org/10.1016/j.actamat.2014.05.014	journal	September 2014
Phase field study of the grain size and temperature dependent mechanical responses of tetragonal zirconia polycrystals: A discussion of tension-compression asymmetry Zhu, Jingming; Luo, Jun; Sun, Yuanzun Computational Materials Science, Vol. 172 https://doi.org/10.1016/j.commatsci.2019.109326	journal	February 2020
Phase-field study of size-dependent morphology of austenite–twinned martensite interface in CuAlNi Tůma, K.; Stupkiewicz, S. International Journal of Solids and Structures, Vol. 97-98 https://doi.org/10.1016/j.ijsolstr.2016.07.040	journal	October 2016
Phase field modeling of the tetragonal-to-monoclinic phase transformation in zirconia Mamivand, Mahmood; Asle Zaeem, Mohsen; El Kadiri, Haitham Acta Materialia, Vol. 61, Issue 14 https://doi.org/10.1016/j.actamat.2013.05.015	journal	August 2013
A finite-strain thermomechanical behavior model for iron-based shape memory alloys accounting for coupling between phase transformation and plastic slip Sallami, Achref; Khalil, Walid; Bouraoui, Tarak International Journal of Plasticity, Vol. 124 https://doi.org/10.1016/j.ijplas.2019.08.006	journal	January 2020
Three-dimensional, non-isothermal phase-field modeling of thermally and stress-induced martensitic transformations in shape memory alloys Cui, Shushan; Wan, Jianfeng; Zuo, Xunwei International Journal of Solids and Structures, Vol. 109 https://doi.org/10.1016/j.ijsolstr.2017.01.001	journal	March 2017
Phase-field modelling of martensitic transformation: the effects of grain and twin boundaries Malik, A.; Amberg, G.; Borgenstam, A. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 8 https://doi.org/10.1088/0965-0393/21/8/085003	journal	October 2013
Grain size and pseudoelastic behaviour of a Cu–Al–Be alloy Montecinos, S.; Cuniberti, A.; Sepúlveda, A. Materials Characterization, Vol. 59, Issue 2 https://doi.org/10.1016/j.matchar.2006.11.009	journal	February 2008
Thermodynamical model of cyclic behaviour of TiNi and CuZnAl shape memory alloys under isothermal undulated tensile tests Lexcellent, C.; Bourbon, G. Mechanics of Materials, Vol. 24, Issue 1 https://doi.org/10.1016/0167-6636(96)00027-0	journal	September 1996
Phase-field modeling of austenite grain size effect on martensitic transformation in stainless steels Yeddu, Hemantha Kumar Computational Materials Science, Vol. 154 https://doi.org/10.1016/j.commatsci.2018.07.040	journal	November 2018
Superelastic behavior and damping capacity of CuAlBe alloys Montecinos, Susana; Moroni, María Ofelia; Sepúlveda, Aquiles Materials Science and Engineering: A, Vol. 419, Issue 1-2 https://doi.org/10.1016/j.msea.2005.11.057	journal	March 2006
A review of constitutive models and modeling techniques for shape memory alloys Cisse, Cheikh; Zaki, Wael; Ben Zineb, Tarak International Journal of Plasticity, Vol. 76 https://doi.org/10.1016/j.ijplas.2015.08.006	journal	January 2016
Elaboration and characterization of new low temperature shape memory CuAlBe alloys Belkahla, S.; Flores Zuñiga, H.; Guenin, G. Materials Science and Engineering: A, Vol. 169, Issue 1-2 https://doi.org/10.1016/0921-5093(93)90606-F	journal	September 1993
A microscopic theory for antiphase boundary motion and its application to antiphase domain coarsening Allen, Samuel M.; Cahn, John W. Acta Metallurgica, Vol. 27, Issue 6 https://doi.org/10.1016/0001-6160(79)90196-2	journal	June 1979
Phase-field simulations of thermomechanical behavior of MnNi shape memory alloys using finite element method Cui, Shushan; Wan, Jianfeng; Rong, Yonghua Computational Materials Science, Vol. 139 https://doi.org/10.1016/j.commatsci.2017.08.010	journal	November 2017
Three-dimensional field model and computer modeling of martensitic transformations Wang, Y.; Khachaturyan, A. G. Acta Materialia, Vol. 45, Issue 2 https://doi.org/10.1016/S1359-6454(96)00180-2	journal	February 1997
Stress-induced martensitic transformation of a NiTi alloy in isothermal shear, tension and compression Orgéas, L.; Favier, D. Acta Materialia, Vol. 46, Issue 15 https://doi.org/10.1016/S1359-6454(98)00167-0	journal	September 1998
A general macroscopic description of the thermomechanical behavior of shape memory alloys Leclercq, S.; Lexcellent, C. Journal of the Mechanics and Physics of Solids, Vol. 44, Issue 6 https://doi.org/10.1016/0022-5096(96)00013-0	journal	June 1996
Orthorhombic lattice deformation of CuAlBe shape-memory single crystals under cyclic strain Tidu, A.; Eberhardt, A.; Bolle, B. Journal of Applied Crystallography, Vol. 34, Issue 6 https://doi.org/10.1107/S002188980101384X	journal	November 2001
Shape memory alloy CuAlBe strands subjected to cyclic axial loads Beltran, J. F.; Cruz, C.; Herrera, R. Engineering Structures, Vol. 33, Issue 10 https://doi.org/10.1016/j.engstruct.2011.06.015	journal	October 2011
A phase-field model for incoherent martensitic transformations including plastic accommodation processes in the austenite Kundin, J.; Raabe, D.; Emmerich, H. Journal of the Mechanics and Physics of Solids, Vol. 59, Issue 10 https://doi.org/10.1016/j.jmps.2011.07.001	journal	October 2011
Elastoplastic phase-field simulation of martensitic transformation with plastic deformation in polycrystal Yamanaka, Akinori; Takaki, Tomohiro; Tomita, Yoshihiro International Journal of Mechanical Sciences, Vol. 52, Issue 2 https://doi.org/10.1016/j.ijmecsci.2009.09.020	journal	February 2010
Shape memory alloy nanostructures with coupled dynamic thermo-mechanical effects Dhote, R. P.; Gomez, H.; Melnik, R. N. V. Computer Physics Communications, Vol. 192 https://doi.org/10.1016/j.cpc.2015.02.019	journal	July 2015
A 3D model of the cyclic thermomechanical behavior of shape memory alloys Zaki, Wael; Moumni, Ziad Journal of the Mechanics and Physics of Solids, Vol. 55, Issue 11 https://doi.org/10.1016/j.jmps.2007.03.011	journal	November 2007
Evaluation of grain refiners influence on the mechanical properties in a CuAlBe shape memory alloy by ultrasonic and mechanical tensile testing de Albuquerque, Victor Hugo C.; Melo, Tadeu Antonio de A.; de Oliveira, Danniel Ferreira Materials & Design, Vol. 31, Issue 7 https://doi.org/10.1016/j.matdes.2010.02.010	journal	August 2010
Elastoplastic phase-field simulation of self- and plastic accommodations in martensitic transformation Yamanaka, A.; Takaki, T.; Tomita, Y. Materials Science and Engineering: A, Vol. 491, Issue 1-2 https://doi.org/10.1016/j.msea.2008.02.035	journal	September 2008
A constitutive model for Fe-based shape memory alloy considering martensitic transformation and plastic sliding coupling: Application to a finite element structural analysis Khalil, Walid; Mikolajczak, Alain; Bouby, Céline Journal of Intelligent Material Systems and Structures, Vol. 23, Issue 10 https://doi.org/10.1177/1045389X12442014	journal	May 2012
Anisotropy of martensitic transformations in modeling of shape memory alloy polycrystals Šittner, Petr; Novák, Václav International Journal of Plasticity, Vol. 16, Issue 10-11 https://doi.org/10.1016/S0749-6419(00)00009-7	journal	January 2000
Superelasticity and fatigue in oligocrystalline shape memory alloy microwires Ueland, Stian M.; Schuh, Christopher A. Acta Materialia, Vol. 60, Issue 1 https://doi.org/10.1016/j.actamat.2011.09.054	journal	January 2012
Grain size and temperature influence on the toughness of a CuAlBe shape memory alloy de Albuquerque, Victor Hugo C.; Melo, Tadeu Antonio de A.; Gomes, Rodinei M. Materials Science and Engineering: A, Vol. 528, Issue 1 https://doi.org/10.1016/j.msea.2010.09.034	journal	November 2010
A non-isothermal phase-field model for shape memory alloys: Numerical simulations of superelasticity and shape memory effect under stress-controlled conditions Maraldi, Mirko; Molari, Luisa; Grandi, Diego Journal of Intelligent Material Systems and Structures, Vol. 23, Issue 10 https://doi.org/10.1177/1045389X12442012	journal	May 2012
Effects of grain size on plastic deformation in a β CuAlBe shape memory alloy Montecinos, S.; Cuniberti, A. Materials Science and Engineering: A, Vol. 600 https://doi.org/10.1016/j.msea.2014.02.028	journal	April 2014
Simulation of Austenite-to-ferrite Transformation in Deformed Austenite by Crystal Plasticity Finite Element Method and Multi-phase-field Method Yamanaka, Akinori; Takaki, Tomohiro; Tomita, Yoshihiro ISIJ International, Vol. 52, Issue 4 https://doi.org/10.2355/isijinternational.52.659	journal	January 2012
Modeling and Simulation of Architectured Iron-Based SMA Materials Zaki, Wael; Cissé, Cheikh; Ben Zineb, Tarak ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 2: Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation; Structural Health Monitoring https://doi.org/10.1115/SMASIS2017-3759	conference	November 2017
Bulk and thin film microstructures in untwinned martensites Hane, Kevin F. Journal of the Mechanics and Physics of Solids, Vol. 47, Issue 9 https://doi.org/10.1016/S0022-5096(98)00125-2	journal	September 1999
Effect of grain size on the stress–temperature relationship in a β CuAlBe shape memory alloy Montecinos, S.; Cuniberti, A.; Romero, R. Intermetallics, Vol. 19, Issue 1 https://doi.org/10.1016/j.intermet.2010.09.002	journal	January 2011
Three-dimensional phase field model of low-symmetry martensitic transformation in polycrystal: simulation of ζ′2 martensite in AuCd alloys Jin, Y. M.; Artemev, A.; Khachaturyan, A. G. Acta Materialia, Vol. 49, Issue 12 https://doi.org/10.1016/S1359-6454(01)00108-2	journal	July 2001
A macroscale phase-field model for shape memory alloys with non-isothermal effects: Influence of strain rate and environmental conditions on the mechanical response Grandi, D.; Maraldi, M.; Molari, L. Acta Materialia, Vol. 60, Issue 1 https://doi.org/10.1016/j.actamat.2011.09.040	journal	January 2012
Martensitic Transformation and Grain Size in a Cu-Al-Be alloy Montecinos, S.; Cuniberti, A. Procedia Materials Science, Vol. 1 https://doi.org/10.1016/j.mspro.2012.06.020	journal	January 2012
Phase-field modeling of multivariant martensitic microstructures and size effects in nano-indentation Rezaee-Hajidehi, Mohsen; Stupkiewicz, Stanisław Mechanics of Materials, Vol. 141 https://doi.org/10.1016/j.mechmat.2019.103267	journal	January 2020
Experimental and numerical determinations of the initial surface of phase transformation under biaxial loading in some polycrystalline shape-memory alloys Lexcellent, C.; Vivet, A.; Bouvet, C. Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 12 https://doi.org/10.1016/S0022-5096(02)00007-8	journal	December 2002
Micromechanics modelling for the constitutive behavior of polycrystalline shape memory alloys—II. Study of the individual phenomena Sun, Qing Ping; Hwang, Keh Chih Journal of the Mechanics and Physics of Solids, Vol. 41, Issue 1 https://doi.org/10.1016/0022-5096(93)90061-J	journal	January 1993
Tensile-compressive asymmetry influence on shape memory alloy system dynamics Savi, Marcelo A.; Sá, Milton A. N.; Paiva, Alberto Chaos, Solitons & Fractals, Vol. 36, Issue 4 https://doi.org/10.1016/j.chaos.2006.09.043	journal	May 2008
Phase-Field Study of Microstructure and Plasticity in Polycrystalline MnNi Shape Memory Alloys Cui, Shushan; Wan, Jianfeng; Zhang, Jihua Metallurgical and Materials Transactions A, Vol. 49, Issue 12 https://doi.org/10.1007/s11661-018-4937-0	journal	October 2018
A review on phase field modeling of martensitic phase transformation Mamivand, Mahmood; Zaeem, Mohsen Asle; El Kadiri, Haitham Computational Materials Science, Vol. 77 https://doi.org/10.1016/j.commatsci.2013.04.059	journal	September 2013
Numerical simulation of the behavior of steel T-stubs connected by Fe-based shape memory alloy bolts Cissé, Cheikh; Zaki, Wael; Ben Zineb, Tarak Journal of Intelligent Material Systems and Structures, Vol. 29, Issue 16 https://doi.org/10.1177/1045389X18781263	journal	June 2018
Lifetime of superelastic Cu–Al–Be single crystal wires under bending fatigue Siredey, N.; Hautcoeur, A.; Eberhardt, A. Materials Science and Engineering: A, Vol. 396, Issue 1-2 https://doi.org/10.1016/j.msea.2005.01.021	journal	April 2005
Orthotropic yield criterion for hexagonal closed packed metals Cazacu, Oana; Plunkett, Brian; Barlat, Frédéric International Journal of Plasticity, Vol. 22, Issue 7 https://doi.org/10.1016/j.ijplas.2005.06.001	journal	July 2006
Constitutive model for the numerical analysis of phase transformation in polycrystalline shape memory alloys Lagoudas, Dimitris; Hartl, Darren; Chemisky, Yves International Journal of Plasticity, Vol. 32-33 https://doi.org/10.1016/j.ijplas.2011.10.009	journal	May 2012
Phase proportioning in CuAlBe shape memory alloys during thermomechanical loadings using electric resistance variation Gédouin, Pierre-Antoine; Chirani, Shabnam Arbab; Calloch, Sylvain International Journal of Plasticity, Vol. 26, Issue 2 https://doi.org/10.1016/j.ijplas.2009.06.004	journal	February 2010
Phase-field modeling of martensitic microstructure in NiTi shape memory alloys Zhong, Yuan; Zhu, Ting Acta Materialia, Vol. 75 https://doi.org/10.1016/j.actamat.2014.04.013	journal	August 2014
Theory of ferroelectrics Devonshire, A. F. Advances in Physics, Vol. 3, Issue 10 https://doi.org/10.1080/00018735400101173	journal	April 1954
Isothermal martensitic transformation in a 12Cr–9Ni–4Mo–2Cu stainless steel in applied magnetic fields San Martín, D.; Aarts, K. W. P.; Rivera-Díaz-del-Castillo, P. E. J. Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 10 https://doi.org/10.1016/j.jmmm.2008.02.002	journal	May 2008
A nonlinear 3D model for iron-based shape memory alloys considering different thermomechanical properties for austenite and martensite and coupling between transformation and plasticity Cissé, Cheikh; Zaki, Wael; Gu, Xiaojun Mechanics of Materials, Vol. 107 https://doi.org/10.1016/j.mechmat.2017.01.008	journal	April 2017
A review of modeling techniques for advanced effects in shape memory alloy behavior Cisse, Cheikh; Zaki, Wael; Zineb, Tarak Ben Smart Materials and Structures, Vol. 25, Issue 10 https://doi.org/10.1088/0964-1726/25/10/103001	journal	September 2016
A phase-field study of the martensitic detwinning in NiTi shape memory alloys under tension or compression Li, Xiaochao; Su, Yu Acta Mechanica, Vol. 231, Issue 4 https://doi.org/10.1007/s00707-020-02613-x	journal	January 2020
Stress-assisted martensitic transformations in steels: A 3-D phase-field study Yeddu, Hemantha Kumar; Borgenstam, Annika; Ågren, John Acta Materialia, Vol. 61, Issue 7 https://doi.org/10.1016/j.actamat.2013.01.039	journal	April 2013
Temperature and grain size effects on the behavior of CuAlBe SMA wires under cyclic loading Araya, Rodrigo; Marivil, Marco; Mir, Cristóbal Materials Science and Engineering: A, Vol. 496, Issue 1-2 https://doi.org/10.1016/j.msea.2008.05.030	journal	November 2008
A phase field – Finite element approach to model the interaction between phase transformations and plasticity in shape memory alloys Paranjape, Harshad M.; Manchiraju, Sivom; Anderson, Peter M. International Journal of Plasticity, Vol. 80 https://doi.org/10.1016/j.ijplas.2015.12.007	journal	May 2016
A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings Bouvet, Christophe; Calloch, Sylvain; Lexcellent, Christian European Journal of Mechanics - A/Solids, Vol. 23, Issue 1 https://doi.org/10.1016/j.euromechsol.2003.09.005	journal	January 2004
A look into Cu-based shape memory alloys: Present scenario and future prospects Dasgupta, Rupa Journal of Materials Research, Vol. 29, Issue 16 https://doi.org/10.1557/jmr.2014.189	journal	August 2014
Three-dimensional phase field model of proper martensitic transformation Artemev, A.; Jin, Y.; Khachaturyan, A. G. Acta Materialia, Vol. 49, Issue 7 https://doi.org/10.1016/S1359-6454(01)00021-0	journal	April 2001
Phase field simulation to one-way shape memory effect of NiTi shape memory alloy single crystal Xu, Bo; Kang, Guozheng; Kan, Qianhua Computational Materials Science, Vol. 161 https://doi.org/10.1016/j.commatsci.2019.02.009	journal	April 2019
Thermal analysis of Cu-14.82 wt% Al-0.4 wt% Be shape memory alloy Aksu Canbay, Canan; Aydoğdu, Ayşe Journal of Thermal Analysis and Calorimetry, Vol. 113, Issue 2 https://doi.org/10.1007/s10973-012-2792-6	journal	November 2012
Interfacial Microstructures in Martensitic Transitions: From Optical Observations to Mathematical Modeling Seiner, Hanus; Glatz, Ondrej; Landa, Michal International Journal for Multiscale Computational Engineering, Vol. 7, Issue 5 https://doi.org/10.1615/IntJMultCompEng.v7.i5.60	journal	January 2009
Size effects in martensitic microstructures: Finite-strain phase field model versus sharp-interface approach Tůma, K.; Stupkiewicz, S.; Petryk, H. Journal of the Mechanics and Physics of Solids, Vol. 95 https://doi.org/10.1016/j.jmps.2016.04.013	journal	October 2016
Equivalent transformation strain and its relation with martensite volume fraction for isotropic and anisotropic shape memory alloys Taillard, K.; Chirani, S. Arbab; Calloch, S. Mechanics of Materials, Vol. 40, Issue 4-5 https://doi.org/10.1016/j.mechmat.2007.07.005	journal	April 2008
Modelling of Microstructure and its Evolution in Shape-Memory-Alloy Single-Crystals, in Particular in CuAlNi Kružík, Martin; Mielke, Alexander; Roubíček, Tomáš Meccanica, Vol. 40, Issue 4-6 https://doi.org/10.1007/s11012-005-2106-1	journal	December 2005
On the elastocaloric effect in CuAlBe shape memory alloys: A quantitative phase-field modeling approach Cissé, Cheikh; Asle Zaeem, Mohsen Computational Materials Science, Vol. 183 https://doi.org/10.1016/j.commatsci.2020.109808	journal	October 2020
Preisach modeling of hysteresis for a pseudoelastic Cu‐Zn‐Al single crystal Ortín, Jordi Journal of Applied Physics, Vol. 71, Issue 3 https://doi.org/10.1063/1.351238	journal	February 1992
Development of a stress-induced martensitic transformation criterion for a Cu–Al–Be polycrystalline shape memory alloy undergoing uniaxial tension García-Castillo, F. N.; Cortés-Pérez, J.; Amigó, V. Acta Materialia, Vol. 97 https://doi.org/10.1016/j.actamat.2015.06.044	journal	September 2015
Anisotropy of Cu-Based Shape Memory Alloys In Tension/Compression Thermomechanical Loads Sˇittner, P.; Nova´k, V. Journal of Engineering Materials and Technology, Vol. 121, Issue 1 https://doi.org/10.1115/1.2815999	journal	January 1999
Phase field modeling to transformation induced plasticity in super-elastic NiTi shape memory alloy single crystal Xie, Xi; Kang, Guozheng; Kan, Qianhua Modelling and Simulation in Materials Science and Engineering, Vol. 27, Issue 4 https://doi.org/10.1088/1361-651X/ab0e53	journal	April 2019
SHAPE MEMORY EFFECT IN Cu-Al-Be TERNARY ALLOYS Higuchi, A.; Suzuki, K.; Matsumoto, Y. Le Journal de Physique Colloques, Vol. 43, Issue C4 https://doi.org/10.1051/jphyscol:19824125	journal	December 1982
The effects of free surfaces on martensite microstructures: 3D phase field microelasticity simulation study Wang, Yu U.; Jin, Yongmei M.; Khachaturyan, Armen G. Acta Materialia, Vol. 52, Issue 4 https://doi.org/10.1016/j.actamat.2003.10.037	journal	February 2004
Back stress and shape recoverability during reverse transformation in an Fe-based shape memory alloy Nishimura, Fumihito; Watanabe, Noriko; Tanaka, Kikuaki Materials Science and Engineering: A, Vol. 247, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00841-1	journal	June 1998
Simulation of grain size effects in nanocrystalline shape memory alloys Ahluwalia, Rajeev; Quek, Siu Sin; Wu, David T. Journal of Applied Physics, Vol. 117, Issue 24 https://doi.org/10.1063/1.4923044	journal	June 2015
Three dimensional elasto-plastic phase field simulation of martensitic transformation in polycrystal Malik, Amer; Yeddu, Hemantha Kumar; Amberg, Gustav Materials Science and Engineering: A, Vol. 556 https://doi.org/10.1016/j.msea.2012.06.080	journal	October 2012
On the origin of residual strain in shape memory alloys: experimental investigation on evolutions in the microstructure of CuAlBe during complex thermomechanical loadings Barati, M.; Chirani, S. Arbab; Kadkhodaei, M. Smart Materials and Structures, Vol. 26, Issue 2 https://doi.org/10.1088/1361-665X/aa5745	journal	January 2017
A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity Auricchio, F.; Reali, A.; Stefanelli, U. International Journal of Plasticity, Vol. 23, Issue 2 https://doi.org/10.1016/j.ijplas.2006.02.012	journal	February 2007
Mechanical Behavior of a Cu-Al-Be Shape Memory Alloy Under Multiaxial Proportional and Nonproportional Loadings Bouvet, Christophe; Calloch, Sylvain; Lexcellent, Christian Journal of Engineering Materials and Technology, Vol. 124, Issue 2 https://doi.org/10.1115/1.1448324	journal	March 2002
A model for shape memory alloy beams accounting for tensile compressive asymmetry Viet, Nguyen Van; Zaki, Wael; Moumni, Ziad Journal of Intelligent Material Systems and Structures, Vol. 30, Issue 18-19 https://doi.org/10.1177/1045389X19873407	journal	September 2019
Rate-dependent response of superelastic Cu–Al–Mn alloy rods to tensile cyclic loads Araki, Yoshikazu; Maekawa, Nao; Omori, Toshihiro Smart Materials and Structures, Vol. 21, Issue 3 https://doi.org/10.1088/0964-1726/21/3/032002	journal	February 2012
Effect of variant strain accommodation on the three-dimensional microstructure formation during martensitic transformation: Application to zirconia Mamivand, Mahmood; Asle Zaeem, Mohsen; El Kadiri, Haitham Acta Materialia, Vol. 87 https://doi.org/10.1016/j.actamat.2014.12.036	journal	April 2015
Strain-induced martensitic transformation in stainless steels: A three-dimensional phase-field study Yeddu, Hemantha Kumar; Lookman, Turab; Saxena, Avadh Acta Materialia, Vol. 61, Issue 18 https://doi.org/10.1016/j.actamat.2013.08.011	journal	October 2013
Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing Hou, Huilong; Simsek, Emrah; Ma, Tao Science, Vol. 366, Issue 6469 https://doi.org/10.1126/science.aax7616	journal	November 2019
Rate-independent dissipation in phase-field modelling of displacive transformations Tůma, K.; Stupkiewicz, S.; Petryk, H. Journal of the Mechanics and Physics of Solids, Vol. 114 https://doi.org/10.1016/j.jmps.2018.02.007	journal	May 2018
A 3D super-elastic model for shape memory alloys taking into account progressive strain under cyclic loadings Saint-Sulpice, Luc; Chirani, Shabnam Arbab; Calloch, Sylvain Mechanics of Materials, Vol. 41, Issue 1 https://doi.org/10.1016/j.mechmat.2008.07.004	journal	January 2009
Elastoplastic phase field model for microstructure evolution Guo, X. H.; Shi, San-Qiang; Ma, X. Q. Applied Physics Letters, Vol. 87, Issue 22 https://doi.org/10.1063/1.2138358	journal	November 2005
Thermodynamics of isotropic pseudoelasticity in shape memory alloys Raniecki, B.; Lexcellent, Ch. European Journal of Mechanics - A/Solids, Vol. 17, Issue 2 https://doi.org/10.1016/S0997-7538(98)80082-X	journal	March 1998
Modelling of martensitic transformation and plastic slip effects on the thermo-mechanical behaviour of Fe-based shape memory alloys Jemal, Fatma; Bouraoui, Tarak; Ben Zineb, Tarak Mechanics of Materials, Vol. 41, Issue 7 https://doi.org/10.1016/j.mechmat.2008.11.007	journal	July 2009

Similar Records

On the elastocaloric effect in CuAlBe shape memory alloys: A quantitative phase-field modeling approach

Journal Article · Wed May 27 00:00:00 EDT 2020 · Computational Materials Science · OSTI ID:1771193

Cissé, Cheikh; Asle Zaeem, Mohsen

Transformation-induced fracture toughening in CuAlBe shape memory alloys: A phase-field study

Journal Article · Wed Oct 14 00:00:00 EDT 2020 · International Journal of Mechanical Sciences · OSTI ID:1771193

Cissé, Cheikh; Asle Zaeem, Mohsen

A phase-field model for non-isothermal phase transformation and plasticity in polycrystalline yttria-stabilized tetragonal zirconia

Journal Article · Wed Apr 08 00:00:00 EDT 2020 · Acta Materialia · OSTI ID:1771193

Cissé, Cheikh; Asle Zaeem, Mohsen

Related Subjects

36 MATERIALS SCIENCE
phase-field modeling
CuAlBe shape memory alloy
plasticity
asymmetry
cyclic deformation

Title: An Asymmetric Elasto-Plastic Phase-Field Model for Shape Memory Effect, Pseudoelasticity and Thermomechanical Training in Polycrystalline Shape Memory Alloys

Citation Formats

References (110)

Similar Records

Related Subjects