Microparticle impact-bonding modes for mismatched metals: From co-deformation to splatting and penetration

Hassani, Mostafa; Veysset, David; Sun, Yuchen; Nelson, Keith A.; Schuh, Christopher A.

doi:10.1016/j.actamat.2020.08.038

Title: Microparticle impact-bonding modes for mismatched metals: From co-deformation to splatting and penetration

Journal Article · Tue Aug 25 00:00:00 EDT 2020 · Acta Materialia

DOI:https://doi.org/10.1016/j.actamat.2020.08.038· OSTI ID:1658597

Hassani, Mostafa ^[1]; Veysset, David ^[2]; Sun, Yuchen ^[2]; Nelson, Keith A. ^[2];

^[2]

Cornell Univ., Ithaca, NY (United States); Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)
Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

In this paper we present a comprehensive experimental campaign of high-velocity microparticle impacts with different combinations of particle and substrate materials to identify possible deformation regimes. Based on experimental observations of the impact sites, we identify three typical modes of behavior, namely, splatting, co-deformation, and penetration. We develop a theoretical framework to predict the operative bonding regime for a given particle/substrate combination, ranging from splatting and penetration at two extremes of a spectrum, and co-deformation in the center. We propose an impact ratio based on the materials’ properties, which can successfully quantify the spectrum. Co-deformation is expected when the ratio is around unity, while much larger or smaller ratios give rise to penetration and splatting, respectively.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES). Materials Sciences & Engineering Division; US Army Research Office (ARO); US Army Research Laboratory (USARL); USDOE

Grant/Contract Number:: SC0018091; W911NF-18-2-0048; W911NF1920329

OSTI ID:: 1658597

Alternate ID(s):: OSTI ID: 1668900

Journal Information:: Acta Materialia, Vol. 199; ISSN 1359-6454

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (54)

Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration Varley, Russell J.; van der Zwaag, Sybrand Acta Materialia, Vol. 56, Issue 19 https://doi.org/10.1016/j.actamat.2008.08.008	journal	November 2008
Ejection of rock fragments from planetary bodies Melosh, H. J. Geology, Vol. 13, Issue 2 https://doi.org/10.1130/0091-7613(1985)13<144:EORFFP>2.0.CO;2	journal	January 1985
Melt-driven mechanochemical phase transformations in moderately exothermic powder mixtures Humphry-Baker, Samuel A.; Garroni, Sebastiano; Delogu, Francesco Nature Materials, Vol. 15, Issue 12 https://doi.org/10.1038/nmat4732	journal	August 2016
Impact-induced melting during accretion of the Earth de Vries, Jellie; Nimmo, Francis; Melosh, H. Jay Progress in Earth and Planetary Science, Vol. 3, Issue 1 https://doi.org/10.1186/s40645-016-0083-8	journal	March 2016
Microdroplet impact at very high velocity Visser, Claas Willem; Tagawa, Yoshiyuki; Sun, Chao Soft Matter, Vol. 8, Issue 41 https://doi.org/10.1039/c2sm26323h	journal	January 2012
Raindrop-impact-induced erosion processes and prediction: a review Kinnell, P. I. A. Hydrological Processes, Vol. 19, Issue 14 https://doi.org/10.1002/hyp.5788	journal	January 2005
Bonding mechanism in cold gas spraying Assadi, Hamid; Gärtner, Frank; Stoltenhoff, Thorsten Acta Materialia, Vol. 51, Issue 15 https://doi.org/10.1016/S1359-6454(03)00274-X	journal	September 2003
Cold spraying – A materials perspective Assadi, H.; Kreye, H.; Gärtner, F. Acta Materialia, Vol. 116 https://doi.org/10.1016/j.actamat.2016.06.034	journal	September 2016
Cold spray coating: review of material systems and future perspectives Moridi, A.; Hassani-Gangaraj, S. M.; Guagliano, M. Surface Engineering, Vol. 30, Issue 6 https://doi.org/10.1179/1743294414Y.0000000270	journal	December 2013
Corrosion resistance of cold-sprayed Ta coatings in very aggressive conditions Koivuluoto, Heli; Bolelli, Giovanni; Lusvarghi, Luca Surface and Coatings Technology, Vol. 205, Issue 4 https://doi.org/10.1016/j.surfcoat.2010.02.052	journal	November 2010
Critical review of corrosion protection by cold spray coatings Hassani-Gangaraj, S. M.; Moridi, A.; Guagliano, M. Surface Engineering, Vol. 31, Issue 11 https://doi.org/10.1179/1743294415Y.0000000018	journal	April 2015
Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process Sansoucy, E.; Marcoux, P.; Ajdelsztajn, L. Surface and Coatings Technology, Vol. 202, Issue 16 https://doi.org/10.1016/j.surfcoat.2008.02.017	journal	May 2008
Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates Dosta, S.; Couto, M.; Guilemany, J. M. Acta Materialia, Vol. 61, Issue 2 https://doi.org/10.1016/j.actamat.2012.10.011	journal	January 2013
Fatigue behavior of cold spray coatings: The effect of conventional and severe shot peening as pre-/post-treatment Moridi, A.; Hassani-Gangaraj, S. M.; Vezzú, S. Surface and Coatings Technology, Vol. 283 https://doi.org/10.1016/j.surfcoat.2015.10.063	journal	December 2015
Pyramidal Fin Arrays Performance Using Streamwise Anisotropic Materials by Cold Spray Additive Manufacturing Cormier, Yannick; Dupuis, Philippe; Jodoin, Bertrand Journal of Thermal Spray Technology, Vol. 25, Issue 1-2 https://doi.org/10.1007/s11666-015-0267-6	journal	July 2015
Structural repair using cold spray technology for enhanced sustainability of high value assets Widener, Christian A.; Ozdemir, Ozan C.; Carter, Michael Procedia Manufacturing, Vol. 21 https://doi.org/10.1016/j.promfg.2018.02.132	journal	January 2018
Fixing a hole (with cold spray) Petráčková, K.; Kondás, J.; Guagliano, M. International Journal of Fatigue, Vol. 110 https://doi.org/10.1016/j.ijfatigue.2018.01.014	journal	May 2018
Bonding features and associated mechanisms in kinetic sprayed titanium coatings Bae, Gyuyeol; Kumar, S.; Yoon, Sanghoon Acta Materialia, Vol. 57, Issue 19 https://doi.org/10.1016/j.actamat.2009.07.061	journal	November 2009
High-Resolution Microstructural Investigations of Interfaces Between Light Metal Alloy Substrates and Cold Gas-Sprayed Coatings Wank, Andreas; Wielage, Bernhard; Podlesak, Harry Journal of Thermal Spray Technology, Vol. 15, Issue 2 https://doi.org/10.1361/105996306X108291	journal	June 2006
Melting Can Hinder Impact-Induced Adhesion Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A. Physical Review Letters, Vol. 119, Issue 17 https://doi.org/10.1103/PhysRevLett.119.175701	journal	October 2017
Single Impact Bonding of Cold Sprayed Ti-6Al-4V Powders on Different Substrates Vidaller, Maria Villa; List, Alexander; Gaertner, Frank Journal of Thermal Spray Technology, Vol. 24, Issue 4 https://doi.org/10.1007/s11666-014-0200-4	journal	January 2015
Interface melding in cold spray titanium particle impact King, Peter C.; Busch, Christian; Kittel-Sherri, Teresa Surface and Coatings Technology, Vol. 239 https://doi.org/10.1016/j.surfcoat.2013.11.039	journal	January 2014
Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process Grujicic, M.; Zhao, C. L.; DeRosset, W. S. Materials & Design, Vol. 25, Issue 8 https://doi.org/10.1016/j.matdes.2004.03.008	journal	December 2004
General aspects of interface bonding in kinetic sprayed coatings Bae, Gyuyeol; Xiong, Yuming; Kumar, S. Acta Materialia, Vol. 56, Issue 17 https://doi.org/10.1016/j.actamat.2008.06.003	journal	October 2008
Adiabatic shear instability is not necessary for adhesion in cold spray Hassani-Gangaraj, Mostafa; Veysset, David; Champagne, Victor K. Acta Materialia, Vol. 158 https://doi.org/10.1016/j.actamat.2018.07.065	journal	October 2018
Response to Comment on “Adiabatic shear instability is not necessary for adhesion in cold spray” Hassani-Gangaraj, Mostafa; Veysset, David; Champagne, Victor K. Scripta Materialia, Vol. 162 https://doi.org/10.1016/j.scriptamat.2018.12.015	journal	March 2019
Mesoscale modeling of jet initiation behavior and microstructural evolution during cold spray single particle impact Suresh, Sumit; Lee, Seok-Woo; Aindow, Mark Acta Materialia, Vol. 182 https://doi.org/10.1016/j.actamat.2019.10.039	journal	January 2020
Interface Material Mixing Formed by the Deposition of Copper on Aluminum by Means of the Cold Spray Process Champagne, Victor K.; Helfritch, Dennis; Leyman, Phillip Journal of Thermal Spray Technology, Vol. 14, Issue 3 https://doi.org/10.1361/105996305X59332	journal	September 2005
Cold spray deposition of nanocrystalline aluminum alloys Ajdelsztajn, Leonardo; Schoenung, Julie M.; Jodoin, Bertrand Metallurgical and Materials Transactions A, Vol. 36, Issue 3 https://doi.org/10.1007/s11661-005-0182-4	journal	March 2005
The Effects of Successive Impacts and Cold Welds on the Deposition Onset of Cold Spray Coatings Xiong, Yuming; Bae, Gyuyeol; Xiong, Xiang Journal of Thermal Spray Technology, Vol. 19, Issue 3 https://doi.org/10.1007/s11666-009-9455-6	journal	December 2009
The role of deposition sequence in cold spraying of dissimilar materials Nikbakht, R.; Seyedein, S. H.; Kheirandish, S. Surface and Coatings Technology, Vol. 367 https://doi.org/10.1016/j.surfcoat.2019.03.065	journal	June 2019
Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process Grujicic, M.; Saylor, J. R.; Beasley, D. E. Applied Surface Science, Vol. 219, Issue 3-4 https://doi.org/10.1016/S0169-4332(03)00643-3	journal	December 2003
Ultra-High Strain Rate Constitutive Modeling of Pure Titanium Using Particle Impact Test Wang, Xuchen; Hassani, Mostafa Journal of Applied Mechanics, Vol. 87, Issue 9 https://doi.org/10.1115/1.4047290	journal	June 2020
In-situ observations of single micro-particle impact bonding Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A. Scripta Materialia, Vol. 145 https://doi.org/10.1016/j.scriptamat.2017.09.042	journal	March 2018
Melt-driven erosion in microparticle impact Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A. Nature Communications, Vol. 9, Issue 1 https://doi.org/10.1038/s41467-018-07509-y	journal	November 2018
Impact-bonding with aluminum, silver, and gold microparticles: Toward understanding the role of native oxide layer Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A. Applied Surface Science, Vol. 476 https://doi.org/10.1016/j.apsusc.2019.01.111	journal	May 2019
Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study Imbriglio, S. I.; Hassani-Gangaraj, M.; Veysset, D. Surface and Coatings Technology, Vol. 361 https://doi.org/10.1016/j.surfcoat.2019.01.071	journal	March 2019
Particle size effects in metallic microparticle impact-bonding Dowding, Ian; Hassani, Mostafa; Sun, Yuchen Acta Materialia, Vol. 194 https://doi.org/10.1016/j.actamat.2020.04.044	journal	August 2020
The Transition From Rebound to Bonding in High-Velocity Metallic Microparticle Impacts: Jetting-Associated Power-Law Divergence Sun, Yuchen; Veysset, David; Nelson, Keith A. Journal of Applied Mechanics, Vol. 87, Issue 9 https://doi.org/10.1115/1.4047206	journal	May 2020
High strain rate deformation of layered nanocomposites Lee, Jae-Hwang; Veysset, David; Singer, Jonathan P. Nature Communications, Vol. 3, Issue 1 https://doi.org/10.1038/ncomms2166	journal	January 2012
Dynamics of supersonic microparticle impact on elastomers revealed by real–time multi–frame imaging Veysset, David; Hsieh, Alex J.; Kooi, Steven Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep25577	journal	May 2016
Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration Lee, Jae-Hwang; Loya, Phillip E.; Lou, Jun Science, Vol. 346, Issue 6213 https://doi.org/10.1126/science.1258544	journal	November 2014
High-velocity micro-particle impact on gelatin and synthetic hydrogel Veysset, David; Kooi, Steven E.; Мaznev, A. A. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 86 https://doi.org/10.1016/j.jmbbm.2018.06.016	journal	October 2018
Dynamic creation and evolution of gradient nanostructure in single-crystal metallic microcubes Thevamaran, Ramathasan; Lawal, Olawale; Yazdi, Sadegh Science, Vol. 354, Issue 6310 https://doi.org/10.1126/science.aag1768	journal	October 2016
Molecular dependencies of dynamic stiffening and strengthening through high strain rate microparticle impact of polyurethane and polyurea elastomers Sun, Yuchen; Wu, You-Chi Mason; Veysset, David Applied Physics Letters, Vol. 115, Issue 9 https://doi.org/10.1063/1.5111964	journal	August 2019
Extreme Mechanical Behavior of Nacre-Mimetic Graphene-Oxide and Silk Nanocomposites Xie, Wanting; Tadepalli, Sirimuvva; Park, Sang Hyun Nano Letters, Vol. 18, Issue 2 https://doi.org/10.1021/acs.nanolett.7b04421	journal	January 2018
Extreme Energy Absorption in Glassy Polymer Thin Films by Supersonic Micro-projectile Impact Hyon, Jinho; Lawal, Olawale; Fried, Omri Materials Today, Vol. 21, Issue 8 https://doi.org/10.1016/j.mattod.2018.07.014	journal	October 2018
Energy dissipation during normal impact of elastic and elastic–plastic spheres Wu, Chuan-Yu; Li, Long-Yuan; Thornton, Colin International Journal of Impact Engineering, Vol. 32, Issue 1-4 https://doi.org/10.1016/j.ijimpeng.2005.08.007	journal	December 2005
Influence of particle parameters at impact on splat formation and solidification in plasma spraying processes Vardelle, M.; Vardelle, A.; Leger, A. C. Journal of Thermal Spray Technology, Vol. 4, Issue 1 https://doi.org/10.1007/BF02648528	journal	March 1995
Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments Pasandideh-Fard, M.; Pershin, V.; Chandra, S. Journal of Thermal Spray Technology, Vol. 11, Issue 2 https://doi.org/10.1361/105996302770348862	journal	June 2002
An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates King, Peter C.; Bae, Gyuyeol; Zahiri, Saden H. Journal of Thermal Spray Technology, Vol. 19, Issue 3 https://doi.org/10.1007/s11666-009-9454-7	journal	December 2009
Physically Based Finite Element Modeling Method to Predict Metallic Bonding in Cold Spray Rahmati, Saeed; Jodoin, Bertrand Journal of Thermal Spray Technology, Vol. 29, Issue 4 https://doi.org/10.1007/s11666-020-01000-1	journal	February 2020
On the Shock Wave Velocity and Impact Pressure in High-Speed Liquid-Solid Impact Heymann, F. J. Journal of Basic Engineering, Vol. 90, Issue 3 https://doi.org/10.1115/1.3605114	journal	September 1968
Asymmetrical bonding in cold spraying of dissimilar materials Nikbakht, R.; Seyedein, S. H.; Kheirandish, S. Applied Surface Science, Vol. 444 https://doi.org/10.1016/j.apsusc.2018.03.103	journal	June 2018

Similar Records

The Transition From Rebound to Bonding in High-Velocity Metallic Microparticle Impacts: Jetting-Associated Power-Law Divergence

Journal Article · Fri May 29 00:00:00 EDT 2020 · Journal of Applied Mechanics · OSTI ID:1658597

Sun, Yuchen; Veysset, David; Nelson, Keith A.; +1 more

The effect of substrate temperature on the critical velocity in microparticle impact bonding

Journal Article · Wed Jul 07 00:00:00 EDT 2021 · Applied Physics Letters · OSTI ID:1658597

Chaban, Ievgeniia; Sun, Yuchen; Veysset, David; +2 more

Melt-driven erosion in microparticle impact

Journal Article · Thu Nov 29 00:00:00 EST 2018 · Nature Communications · OSTI ID:1658597

Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A.; +1 more

Related Subjects

36 MATERIALS SCIENCE
High-velocity impact
Impact Morphology
Impact Bonding
Cold Spray
Flattening
Penetration

Title: Microparticle impact-bonding modes for mismatched metals: From co-deformation to splatting and penetration

Citation Formats

References (54)

Similar Records

Related Subjects