Scaling-Up of Nano-Architected Microstructures: A Mechanical Assessment

Garcia-Taormina, Alina R.; Juarez, Theresa; Oakdale, James S.; Biener, Juergen; Hodge, Andrea M.

doi:10.1002/adem.201900687

Title: Scaling-Up of Nano-Architected Microstructures: A Mechanical Assessment

Journal Article · Thu Aug 22 00:00:00 EDT 2019 · Advanced Engineering Materials

DOI:https://doi.org/10.1002/adem.201900687· OSTI ID:1571743

Garcia-Taormina, Alina R. ^[1]; Juarez, Theresa ^[1];

^[2];

^[1]

Univ. of Southern California, Los Angeles, CA (United States)
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

Nano‐ and micro‐architected materials generated by ultra‐high‐resolution 3D printing techniques, such as two‐photon polymerization direct laser writing (TPP‐DLW) or projection micro‐stereolithography (PμSL), have garnered great interest due to their ability to achieve exceptional combinations of material properties. The scalability of these materials, however, remains a crucial challenge as larger high‐resolution samples require stitching smaller blocks of the structure of interest together. Herein, scaling techniques and testing methodologies to investigate the effect of stitching on the integrity and mechanical behavior of TPP‐DLW parts under tensile load are explored. Specifically, stitched log‐pile I‐beam specimens with relative densities of 21.5% and 54.7% are tested herein. The micro‐tensile tests reveal that the higher‐density log‐pile samples exhibit brittle behavior with fracture loads at least four times higher than those of lower‐density samples. The location of sample failure depends on the type of stitch introduced in the sample, as well as on the relative sample density. Overall, this study highlights the importance of stitching techniques and relative density for the design of nano‐ and micro‐architected materials.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC52-07NA27344

OSTI ID:: 1571743

Alternate ID(s):: OSTI ID: 1561331

Report Number(s):: LLNL-JRNL-776826; 969906

Journal Information:: Advanced Engineering Materials, Vol. 21, Issue 11; ISSN 1438-1656

Publisher:: WileyCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 3 works

Citation information provided by
Web of Science

References (53)

High-Entropy Alloy (HEA)-Coated Nanolattice Structures and Their Mechanical Properties Gao, Libo; Song, Jian; Jiao, Zengbao Advanced Engineering Materials, Vol. 20, Issue 1 https://doi.org/10.1002/adem.201700625	journal	September 2017
Fabrication and deformation of three-dimensional hollow ceramic nanostructures Jang, Dongchan; Meza, Lucas R.; Greer, Frank Nature Materials, Vol. 12, Issue 10 https://doi.org/10.1038/nmat3738	journal	September 2013
Fatigue properties of conventionally manufactured and micro-powder-injection-moulded 17-4PH micro-components: Fatigue Properties of Slaby, S. A.; Kraft, O.; Eberl, C. Fatigue & Fracture of Engineering Materials & Structures, Vol. 39, Issue 6 https://doi.org/10.1111/ffe.12416	journal	March 2016
Resilient 3D hierarchical architected metamaterials Meza, Lucas R.; Zelhofer, Alex J.; Clarke, Nigel Proceedings of the National Academy of Sciences, Vol. 112, Issue 37 https://doi.org/10.1073/pnas.1509120112	journal	September 2015
Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography Bückmann, Tiemo; Stenger, Nicolas; Kadic, Muamer Advanced Materials, Vol. 24, Issue 20 https://doi.org/10.1002/adma.201200584	journal	April 2012
Optimizing the mechanical properties of polymer resists for strong and light-weight micro-truss structures Schroer, Almut; Bauer, Jens; Schwaiger, Ruth Extreme Mechanics Letters, Vol. 8 https://doi.org/10.1016/j.eml.2016.04.014	journal	September 2016
Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization Saha, Sourabh K.; Divin, Chuck; Cuadra, Jefferson A. Journal of Micro and Nano-Manufacturing, Vol. 5, Issue 3 https://doi.org/10.1115/1.4036445	journal	May 2017
3D nano-architected metallic glass: Size effect suppresses catastrophic failure Liontas, Rachel; Greer, Julia R. Acta Materialia, Vol. 133 https://doi.org/10.1016/j.actamat.2017.05.019	journal	July 2017
Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications Ovsianikov, Aleksandr; Mironov, Vladimir; Stampfl, Jürgen Expert Review of Medical Devices, Vol. 9, Issue 6 https://doi.org/10.1586/erd.12.48	journal	November 2012
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices Meza, L. R.; Das, S.; Greer, J. R. Science, Vol. 345, Issue 6202 https://doi.org/10.1126/science.1255908	journal	September 2014
Submicrometer 3D structures fabrication enabled by one-photon absorption direct laser writing Do, Mai Trang; Nguyen, Thi Thanh Ngan; Li, Qinggele Optics Express, Vol. 21, Issue 18 https://doi.org/10.1364/OE.21.020964	journal	January 2013
Tensile and compressive microspecimen testing of bulk nanoporous gold Balk, T. John; Eberl, Chris; Sun, Ye JOM, Vol. 61, Issue 12 https://doi.org/10.1007/s11837-009-0176-6	journal	December 2009
Effective properties of the octet-truss lattice material Deshpande, V. S.; Fleck, N. A.; Ashby, M. F. Journal of the Mechanics and Physics of Solids, Vol. 49, Issue 8 https://doi.org/10.1016/S0022-5096(01)00010-2	journal	August 2001
Adaptive stitching for meso-scale printing with two-photon lithography Dehaeck, S.; Scheid, B.; Lambert, P. Additive Manufacturing, Vol. 21 https://doi.org/10.1016/j.addma.2018.03.026	journal	May 2018
Materials by design: Using architecture in material design to reach new property spaces Montemayor, Lauren; Chernow, Victoria; Greer, Julia R. MRS Bulletin, Vol. 40, Issue 12 https://doi.org/10.1557/mrs.2015.263	journal	November 2015
Recent progress in multiphoton microfabrication Maruo, S.; Fourkas, J. T. Laser & Photonics Review, Vol. 2, Issue 1-2 https://doi.org/10.1002/lpor.200710039	journal	April 2008
Two-Component Polymer Scaffolds for Controlled Three-Dimensional Cell Culture Klein, Franziska; Richter, Benjamin; Striebel, Thomas Advanced Materials, Vol. 23, Issue 11 https://doi.org/10.1002/adma.201004060	journal	January 2011
Evaluating sputter deposited metal coatings on 3D printed polymer micro-truss structures Juarez, Theresa; Schroer, Almut; Schwaiger, Ruth Materials & Design, Vol. 140 https://doi.org/10.1016/j.matdes.2017.12.005	journal	February 2018
Push-to-pull tensile testing of ultra-strong nanoscale ceramic–polymer composites made by additive manufacturing Bauer, Jens; Schroer, Almut; Schwaiger, Ruth Extreme Mechanics Letters, Vol. 3 https://doi.org/10.1016/j.eml.2015.03.006	journal	June 2015
Polymer lattices as mechanically tunable 3-dimensional photonic crystals operating in the infrared Chernow, V. F.; Alaeian, H.; Dionne, J. A. Applied Physics Letters, Vol. 107, Issue 10 https://doi.org/10.1063/1.4930819	journal	September 2015
Two-photon polymerization based large scaffolds for adhesion and proliferation studies of human primary fibroblasts Trautmann, Anika; Rüth, Marieke; Lemke, Horst-Dieter Optics & Laser Technology, Vol. 106 https://doi.org/10.1016/j.optlastec.2018.05.008	journal	October 2018
Micro-architectured materials: past, present and future Fleck, N. A.; Deshpande, V. S.; Ashby, M. F. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 466, Issue 2121 https://doi.org/10.1098/rspa.2010.0215	journal	March 2010
Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy [Invited] Fischer, Joachim; Wegener, Martin Optical Materials Express, Vol. 1, Issue 4 https://doi.org/10.1364/OME.1.000614	journal	January 2011
In situ analysis of crack propagation in polymer foams Saenz, Elio E.; Carlsson, Leif. A.; Karlsson, Anette M. Journal of Materials Science, Vol. 46, Issue 16 https://doi.org/10.1007/s10853-011-5491-y	journal	August 2011
Nanolattices: An Emerging Class of Mechanical Metamaterials Bauer, Jens; Meza, Lucas R.; Schaedler, Tobias A. Advanced Materials, Vol. 29, Issue 40 https://doi.org/10.1002/adma.201701850	journal	September 2017
Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization Ligon, Samuel Clark; Husár, Branislav; Wutzel, Harald Chemical Reviews, Vol. 114, Issue 1 https://doi.org/10.1021/cr3005197	journal	September 2013
Polymerization Kinetics in Three-Dimensional Direct Laser Writing Mueller, Jonathan B.; Fischer, Joachim; Mayer, Frederik Advanced Materials, Vol. 26, Issue 38 https://doi.org/10.1002/adma.201402366	journal	August 2014
Functionalized 3D Architected Materials via Thiol-Michael Addition and Two-Photon Lithography Yee, Daryl W.; Schulz, Michael D.; Grubbs, Robert H. Advanced Materials, Vol. 29, Issue 16 https://doi.org/10.1002/adma.201605293	journal	February 2017
Direct Writing Target Structures by Two-Photon Polymerization Jiang, L. J.; Campbell, J. H.; Lu, Y. F. Fusion Science and Technology, Vol. 70, Issue 2 https://doi.org/10.13182/FST15-222	journal	September 2016
Micromechanics of Amorphous Metal/Polymer Hybrid Structures with 3D Cellular Architectures: Size Effects, Buckling Behavior, and Energy Absorption Capability Mieszala, Maxime; Hasegawa, Madoka; Guillonneau, Gaylord Small, Vol. 13, Issue 8 https://doi.org/10.1002/smll.201602514	journal	December 2016
Ultralight, ultrastiff mechanical metamaterials Zheng, X.; Lee, H.; Weisgraber, T. H. Science, Vol. 344, Issue 6190 https://doi.org/10.1126/science.1252291	journal	June 2014
Mechanical Properties and Fracture Characterization of Cross-Linked PVC Foams Viana, Gilmer M.; Carlsson, Leif A. Journal of Sandwich Structures & Materials, Vol. 4, Issue 2 https://doi.org/10.1177/1099636202004002227	journal	April 2002
Oriented foaming of polystyrene with supercritical carbon dioxide for toughening Bao, Jin-Biao; Liu, Tao; Zhao, Ling Polymer, Vol. 53, Issue 25 https://doi.org/10.1016/j.polymer.2012.10.011	journal	November 2012
Shrinkage of microstructures produced by two-photon polymerization of Zr-based hybrid photosensitive materials Ovsianikov, Aleksandr; Shizhou, Xiao; Farsari, Maria Optics Express, Vol. 17, Issue 4 https://doi.org/10.1364/OE.17.002143	journal	January 2009
Tensile and fracture behavior of polymer foams Kabir, Md. E.; Saha, M. C.; Jeelani, S. Materials Science and Engineering: A, Vol. 429, Issue 1-2 https://doi.org/10.1016/j.msea.2006.05.133	journal	August 2006
Direct Laser Writing of Low-Density Interdigitated Foams for Plasma Drive Shaping Oakdale, James S.; Smith, Raymond F.; Forien, Jean-Baptiste Advanced Functional Materials, Vol. 27, Issue 43 https://doi.org/10.1002/adfm.201702425	journal	September 2017
High-strength cellular ceramic composites with 3D microarchitecture Bauer, J.; Hengsbach, S.; Tesari, I. Proceedings of the National Academy of Sciences, Vol. 111, Issue 7 https://doi.org/10.1073/pnas.1315147111	journal	February 2014
Additive manufacturing of 3D nano-architected metals Vyatskikh, Andrey; Delalande, Stéphane; Kudo, Akira Nature Communications, Vol. 9, Issue 1 https://doi.org/10.1038/s41467-018-03071-9	journal	February 2018
Three-dimensional nano-architected scaffolds with tunable stiffness for efficient bone tissue growth Maggi, Alessandro; Li, Hanqing; Greer, Julia R. Acta Biomaterialia, Vol. 63 https://doi.org/10.1016/j.actbio.2017.09.007	journal	November 2017
Fabrication and characterization of silicon woodpile photonic crystals with a complete bandgap at telecom wavelengths Staude, I.; Thiel, M.; Essig, S. Optics Letters, Vol. 35, Issue 7 https://doi.org/10.1364/OL.35.001094	journal	January 2010
Size Effect on the Strength and Deformation Behavior of Glassy Carbon Nanopillars Albiez, Almut; Schwaiger, Ruth MRS Advances, Vol. 4, Issue 2 https://doi.org/10.1557/adv.2018.648	journal	January 2019
Three-dimensional chiral photonic superlattices Thiel, M.; Fischer, H.; von Freymann, G. Optics Letters, Vol. 35, Issue 2 https://doi.org/10.1364/OL.35.000166	journal	January 2010
Effects of cell structure and density on the properties of high performance polyimide foams Williams, Martha K.; Weiser, Erik S.; Fesmire, James E. Polymers for Advanced Technologies, Vol. 16, Issue 2-3 https://doi.org/10.1002/pat.567	journal	January 2005
Deformation Behavior of Foam Laser Targets Fabricated by Two-Photon Polymerization Liu, Ying; Campbell, John; Stein, Ori Nanomaterials, Vol. 8, Issue 7 https://doi.org/10.3390/nano8070498	journal	July 2018
Fabrication of Low-Density Shock-Propagation Targets Using Two-Photon Polymerization Stein, O.; Liu, Y.; Streit, J. Fusion Science and Technology, Vol. 73, Issue 2 https://doi.org/10.1080/15361055.2017.1406237	journal	December 2017
Finer features for functional microdevices Kawata, Satoshi; Sun, Hong-Bo; Tanaka, Tomokazu Nature, Vol. 412, Issue 6848, p. 697-698 https://doi.org/10.1038/35089130	journal	August 2001
Approaching theoretical strength in glassy carbon nanolattices Bauer, J.; Schroer, A.; Schwaiger, R. Nature Materials, Vol. 15, Issue 4 https://doi.org/10.1038/nmat4561	journal	February 2016
Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography Oakdale, James S.; Ye, Jianchao; Smith, William L. Optics Express, Vol. 24, Issue 24 https://doi.org/10.1364/OE.24.027077	journal	January 2016
Three-Dimensional Invisibility Cloak at Optical Wavelengths Ergin, T.; Stenger, N.; Brenner, P. Science, Vol. 328, Issue 5976, p. 337-339 https://doi.org/10.1126/science.1186351	journal	March 2010
Kinetic approach of oxygen inhibition in ultraviolet- and laser-induced polymerizations Decker, Christian; Jenkins, Aubrey D. Macromolecules, Vol. 18, Issue 6 https://doi.org/10.1021/ma00148a034	journal	November 1985
Nanolattices - An Emerging Class of Mechanical Metamaterials Bauer, J.; Meza, Lr; Schaedler, Ta Wiley-Blackwell https://doi.org/10.17863/cam.10485	journalarticle	January 2017
Size Effect on the Strength and Deformation Behavior of Glassy Carbon Nanopillars Albiez, Almut; Schwaiger, Ruth Cambridge University Press (CUP) https://doi.org/10.5445/ir/1000089479	text	January 2019
Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy Fischer, Joachim; Wegener, Martin arXiv https://doi.org/10.48550/arxiv.1105.5703	text	January 2011

Similar Records

Direct Laser Writing of Low-Density Interdigitated Foams for Plasma Drive Shaping [Direct Laser Writing of Low Density Nanostitched Foams for Plasma Drive Shaping]

Journal Article · Wed Sep 27 00:00:00 EDT 2017 · Advanced Functional Materials · OSTI ID:1571743

Oakdale, James S.; Smith, Raymond F.; Forien, Jean -Baptiste; +12 more

Effect of micron-scale manufacturing flaws on the tensile response of centimeter sized two-photon polymerization microlattices

Journal Article · Thu Apr 15 00:00:00 EDT 2021 · MRS Communications · OSTI ID:1571743

Forien, Jean-Baptiste; Oakdale, James S.; Worthington, Matthew A.; +1 more

Probing the Mechanical Performance of Micro-architected Porous Structures Through In Situ Characterization and Analysis

Journal Article · Wed Aug 23 00:00:00 EDT 2023 · JOM. Journal of the Minerals, Metals & Materials Society · OSTI ID:1571743

Ahn, Seo Young; Wang, Yanbo; Vazic, Bozo; +2 more

Related Subjects

36 MATERIALS SCIENCE
architected materials
direct laser writing
mechanical behavior
scaling-up
two-photon polymerization

Title: Scaling-Up of Nano-Architected Microstructures: A Mechanical Assessment

Citation Formats

References (53)

Similar Records

Related Subjects