Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Support Induced Control of Surface Composition in Cu–Ni/TiO 2 Catalysts Enables High Yield Co-Conversion of HMF and Furfural to Methylated Furans

Journal Article · · ACS Catalysis
 [1];  [2];  [2];  [3]
  1. Bourns College of Engineering - Center for Environmental and Research Technology (CE-CERT), University of California, Riverside, California 92507, United States; Department of Chemical and Environmental Engineering, Bourns College of Engineering, University of California, Riverside, California 92521, United States; DOE/OSTI
  2. Bourns College of Engineering - Center for Environmental and Research Technology (CE-CERT), University of California, Riverside, California 92507, United States; Department of Chemical and Environmental Engineering, Bourns College of Engineering, University of California, Riverside, California 92521, United States
  3. Department of Chemical and Environmental Engineering, Bourns College of Engineering, University of California, Riverside, California 92521, United States; Program in Materials Science, University of California, Riverside, Riverside, California 92521, United States; UCR Center for Catalysis, University of California, Riverside, Riverside, California 92521, United States
Not provided.
Research Organization:
Univ. of California, Riverside, CA (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
DOE Contract Number:
EE0007006
OSTI ID:
1534889
Journal Information:
ACS Catalysis, Journal Name: ACS Catalysis Journal Issue: 6 Vol. 7; ISSN 2155-5435
Publisher:
American Chemical Society (ACS)
Country of Publication:
United States
Language:
English

References (98)

The ethanol steam reforming over Cu-Ni/SiO2 catalysts: Effect of Cu/Ni ratio journal August 2011
Investigation of the Metallic Phases in Reduced, Impregnated Nickel and Nickel—Copper Silica—Alumina Catalysts journal October 1965
Efficient hydrogenolysis of 5-hydroxymethylfurfural to 2,5-dimethylfuran over a cobalt and copper bimetallic catalyst on N-graphene-modified Al 2 O 3 journal January 2016
Ag Alloyed Pd Single-Atom Catalysts for Efficient Selective Hydrogenation of Acetylene to Ethylene in Excess Ethylene journal May 2015
Synthesis and characterization of bimetallic Ni–Cu particles journal April 2003
Decomposition of Methane over a Ni−Cu−MgO Catalyst to Produce Hydrogen and Carbon Nanofibers journal December 2004
Efficient synthesis of 2,5-dihydroxymethylfuran and 2,5-dimethylfuran from 5-hydroxymethylfurfural using mineral-derived Cu catalysts as versatile catalysts journal January 2015
Catalytic Conversion of Biomass to Monofunctional Hydrocarbons and Targeted Liquid-Fuel Classes journal October 2008
Ni-based bimetallic heterogeneous catalysts for energy and environmental applications journal January 2016
Cu-Ni-K/γ-Al2O3 supported catalysts for ethanol steam reforming journal January 2003
Ethanol steam reforming over Ni and Ni–Cu catalysts journal August 2009
Evidence for Crystal-Face Specificity in Surface Segregation of CuNi Alloys journal June 1981
Mechanisms for High Selectivity in the Hydrodeoxygenation of 5-Hydroxymethylfurfural over PtCo Nanocrystals journal May 2016
One-Pot Catalytic Conversion of Cellulose and of Woody Biomass Solids to Liquid Fuels
  • Matson, Theodore D.; Barta, Katalin; Iretskii, Alexei V.
  • Journal of the American Chemical Society, Vol. 133, Issue 35, p. 14090-14097 https://doi.org/10.1021/ja205436c
journal September 2011
Catalysis by alloys and bimetallic clusters journal January 1977
Production of Liquid Alkanes by Aqueous-Phase Processing of Biomass-Derived Carbohydrates journal June 2005
Synergistic Effects of Alloying and Thiolate Modification in Furfural Hydrogenation over Cu-Based Catalysts journal November 2014
A combined XPS/AES study of Cu segregation to the high and low index surfaces of a Cu-Ni alloy journal April 1981
Vapor phase hydrogenation of 2-methylfuran over noble and base metal catalysts journal April 2014
Characterization and Catalytic Properties of the Ni/Al2O3 Catalysts for Aqueous-phase Reforming of Glucose journal December 2008
Regioselective Atomic Rearrangement of Ag–Pt Octahedral Catalysts by Chemical Vapor-Assisted Treatment journal December 2016
Real-Time Product Switching Using a Twin Catalyst System for the Hydrogenation of Furfural in Supercritical CO2 journal October 2010
Reaction pathways of furfural, furfuryl alcohol and 2-methylfuran on Cu(111) and NiCu bimetallic surfaces journal October 2016
Highly selective liquid-phase hydrogenation of furfural over N-doped carbon supported metallic nickel catalyst under mild conditions journal March 2017
Control of Thickness and Chemical Properties of Atomic Layer Deposition Overcoats for Stabilizing Cu/γ-Al 2 O 3 Catalysts journal September 2014
Hybrid routes to biofuels journal June 2007
Highly dispersed Cu nanoparticles as an efficient catalyst for the synthesis of the biofuel 2-methylfuran journal January 2016
XRD and XPS Study of Cu−Ni Interactions on Reduced Copper−Nickel−Aluminum Oxide Solid Solution Catalysts journal April 2006
Experimental and Theoretical Insights into the Hydrogen-Efficient Direct Hydrodeoxygenation Mechanism of Phenol over Ru/TiO 2 journal October 2015
Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates journal June 2007
Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis journal March 2016
Tackling CO Poisoning with Single-Atom Alloy Catalysts journal May 2016
Self-regenerative activity of Ni/Mg(Al)O catalysts with trace Ru during daily start-up and shut-down operation of CH4 steam reforming journal September 2007
Production of renewable jet fuel range alkanes and commodity chemicals from integrated catalytic processing of biomass journal January 2014
Efficient Preparation of Liquid Fuel 2,5-Dimethylfuran from Biomass-Derived 5-Hydroxymethylfurfural over Ru–NaY Catalyst journal October 2015
Isolated Metal Atom Geometries as a Strategy for Selective Heterogeneous Hydrogenations journal March 2012
Efficient Production of the Liquid Fuel 2,5-Dimethylfuran from Fructose Using Formic Acid as a Reagent journal August 2010
Strong metal-support interactions. Group 8 noble metals supported on titanium dioxide journal January 1978
Aqueous phase hydrogenation of furfural to tetrahydrofurfuryl alcohol on alkaline earth metal modified Ni/Al 2 O 3 journal January 2016
Kinetics and mechanism of hydrogenation of furfural on Cu/SiO2 catalysts journal January 2011
Determination of atomic Ni interaction with TiO2 by XPS journal March 2010
How biotech can transform biofuels journal February 2008
Sugar yields from dilute oxalic acid pretreatment of maple wood compared to those with other dilute acids and hot water journal January 2013
High performance of Ir-promoted Ni/TiO2 catalyst toward the selective hydrogenation of cinnamaldehyde journal July 2013
Catalytic Response and Stability of Nickel/Alumina for the Hydrogenation of 5-Hydroxymethylfurfural in Water journal February 2016
Nanoalloys:  From Theory to Applications of Alloy Clusters and Nanoparticles journal March 2008
Reaction-Driven Restructuring of Rh-Pd and Pt-Pd Core-Shell Nanoparticles journal November 2008
Stabilization of Copper Catalysts for Liquid-Phase Reactions by Atomic Layer Deposition journal November 2013
Surface segregation in Cu-Ni and Cu-Pt alloys; A comparison of low-energy ion-scattering results with theory journal February 1978
Towards understanding the reaction pathway in vapour phase hydrogenation of furfural to 2-methylfuran journal March 2006
Kinetics and mechanism of deactivation of Pd$z.sbnd;Al2O3 catalyst in the gaseous phase decarbonylation of furfural journal February 1985
X-ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems journal April 2009
Iron-Promotion of Silica-Supported Copper Catalysts for Furfural Hydrodeoxygenation journal September 2016
Hydrogen production by ethanol steam reforming over Cu-Ni/SBA-15 supported catalysts prepared by direct synthesis and impregnation journal July 2007
Furfural: A Promising Platform Compound for Sustainable Production of C 4 and C 5 Chemicals journal October 2016
Understanding the role of TiO 2 crystal structure on the enhanced activity and stability of Ru/TiO 2 catalysts for the conversion of lignin-derived oxygenates journal January 2014
Tuning Catalytic Performance through a Single or Sequential Post-Synthesis Reaction(s) in a Gas Phase journal December 2016
Rational design of Ni-based catalysts derived from hydrotalcite for selective hydrogenation of 5-hydroxymethylfurfural journal January 2015
Furfural-A Promising Platform for Lignocellulosic Biofuels journal December 2011
Nanoscale Engineering of Efficient Oxygen Reduction Electrocatalysts by Tailoring the Local Chemical Environment of Pt Surface Sites journal November 2016
Selective Transformation of 5-Hydroxymethylfurfural into the Liquid Fuel 2,5-Dimethylfuran over Carbon-Supported Ruthenium journal February 2014
Adsorbate-mediated strong metal–support interactions in oxide-supported Rh catalysts journal September 2016
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering journal September 2006
Synthesis of highly thermostable copper-nickel nanoparticles confined in the channels of ordered mesoporous SBA-15 silica journal January 2011
NixCuy/Al2O3 based catalysts for hydrogen production journal January 2008
Furfuryl alcohol from furfural hydrogenation over copper supported on SBA-15 silica catalysts journal March 2014
Comparison of HMF hydrodeoxygenation over different metal catalysts in a continuous flow reactor journal November 2015
Complete Oxidation of CO, Ethanol, and Ethyl Acetate over Copper Oxide Supported on Titania and Ceria Modified Titania journal October 1998
Hydrogen from steam reforming of ethanol. characterization and performance of copper-nickel supported catalysts journal December 1998
Properties of Copper Chromite Catalysts in Hydrogenation Reactions journal October 1997
Surface composition changes of CuNi-ZrO2 during methane decomposition: An operando NAP-XPS and density functional study journal April 2017
Levulinic Acid as a Catalyst for the Production of 5-Hydroxymethylfurfural and Furfural from Lignocellulose Biomass journal December 2015
Synthesis and Catalytic Performance of Ni/SiO 2 for Hydrogenation of 2-Methylfuran to 2-Methyltetrahydrofuran journal January 2015
Chemical reaction of sputtered Cu film with PI modified by low energy reactive atomic beam journal June 2006
Alloy catalysts designed from first principles journal October 2004
Selective hydrogenation of furfural and levulinic acid to biofuels on the ecofriendly Cu–Fe catalyst journal January 2014
Thermochemical Values for Cu-Ni Surface and Interface Segregation Deduced from Core-Level Binding-Energy Shifts journal February 1983
Nature and catalytic activity of bimetallic CuNi particles on CeO2 support journal December 2012
Catalytic hydrogenolysis and dehydrogenation over copper-nickel alloys journal February 1972
Weighting Variation of Water−Gas Shift in Steam Reforming of Methane over Supported Ni and Ni−Cu Catalysts journal January 2006
In Situ Observation of Cu-Ni Alloy Nanoparticle Formation by X-Ray Diffraction, X-Ray Absorption Spectroscopy, and Transmission Electron Microscopy: Influence of Cu/Ni Ratio journal December 2013
One-step Conversion of Furfural into 2-Methyltetrahydrofuran under Mild Conditions journal April 2015
Efficient and versatile CuNi alloy nanocatalysts for the highly selective hydrogenation of furfural journal April 2017
Nickel-Tungsten Carbide Catalysts for the Production of 2,5-Dimethylfuran from Biomass-Derived Molecules journal February 2014
Coupling metal halides with a co-solvent to produce furfural and 5-HMF at high yields directly from lignocellulosic biomass as an integrated biofuels strategy journal January 2014
Furfural: a renewable and versatile platform molecule for the synthesis of chemicals and fuels journal January 2016
THF co-solvent enhances hydrocarbon fuel precursor yields from lignocellulosic biomass journal January 2013
Combustion of CO and Toluene; Characterisation of Copper Oxide Supported on Titania and Activity Comparisons with Supported Cobalt, Iron, and Manganese Oxide journal October 1996
Converting carbohydrates to bulk chemicals and fine chemicals over heterogeneous catalysts journal January 2011
Vapor phase selective hydrogenation of furfural to furfuryl alcohol over Cu–MgO coprecipitated catalysts journal March 2007
Reactive Extraction of Levulinate Esters and Conversion to γ-Valerolactone for Production of Liquid Fuels journal January 2011
Production of higher alcohols from synthesis gas over nickel containing catalysts journal August 1988
Catalytic Reduction of Biomass-Derived Furanic Compounds with Hydrogen journal October 2013
Surface modification processes during methane decomposition on Cu-promoted Ni–ZrO 2 catalysts journal January 2015
The critical role of heterogeneous catalysis in lignocellulosic biomass conversion journal January 2009
CO hydrogenation to methanol on Cu–Ni catalysts: Theory and experiment journal September 2012
Operando X-ray Absorption Spectroscopy Studies of Sintering for Supported Copper Catalysts during Liquid-phase Reaction journal July 2014
Strong metal-support interactions journal November 1987

Cited By (21)

Low-Cost Nanostructured Electrocatalysts for Hydrogen Evolution in an Anion Exchange Membrane Lignin Electrolysis Cell journal January 2019
Heterogeneous Catalytic Upgrading of Biofuranic Aldehydes to Alcohols journal July 2019
Single pot selective hydrogenation of furfural to 2-methylfuran over carbon supported iridium catalysts journal January 2018
Efficient hydrodeoxygenation of lignin-derived phenols and dimeric ethers with synergistic [Bmim]PF 6 -Ru/SBA-15 catalysis under acid free conditions journal January 2019
Single-step catalytic conversion of furfural to 2-pentanol over bimetallic Co–Cu catalysts journal January 2019
Control of metal-support interactions in heterogeneous catalysts to enhance activity and selectivity journal November 2019
Heterogeneous Nickel Catalysts Derived from 2D Metal–Organic Frameworks for Regulating the Selectivity of Furfural Hydrogenation journal December 2019
Amination of 1-hexanol on bimetallic AuPd/TiO 2 catalysts journal January 2018
Highly Active Mesoporous Cu−Al 2 O 3 Catalyst for the Hydrodeoxygenation of Furfural to 2‐methylfuran journal October 2019
Spectroscopic characterization of a highly selective NiCu 3 /C hydrodeoxygenation catalyst journal January 2018
Support morphology-dependent alloying behaviour and interfacial effects of bimetallic Ni–Cu/CeO 2 catalysts journal January 2019
Advances in porous and nanoscale catalysts for viable biomass conversion journal January 2019
Unraveling the structural properties and reactivity trends of Cu–Ni bimetallic nanoalloy catalysts for biomass-derived levulinic acid hydrogenation journal January 2018
Zirconium-Containing Organic–Inorganic Nanohybrid as a Highly Efficient Catalyst for the Selective Synthesis of Biomass-Derived 2,5-Dihydroxymethylfuran in Isopropanol journal May 2019
Highly selective hydrogenation of biomass-derived 5-hydroxymethylfurfural into 2,5-bis(hydroxymethyl)furan over an acid–base bifunctional hafnium-based coordination polymer catalyst journal January 2019
Self-tuned properties of CuZnO catalysts for hydroxymethylfurfural hydrodeoxygenation towards dimethylfuran production journal January 2020
Catalytic conversion of 5-hydroxymethylfurfural to some value-added derivatives journal January 2018
Cobalt–graphene nanomaterial as an efficient catalyst for selective hydrogenation of 5-hydroxymethylfurfural into 2,5-dimethylfuran journal January 2019
C,N co-doped porous TiO 2 hollow sphere visible light photocatalysts for efficient removal of highly toxic phenolic pollutants journal January 2018
Recent progress in improving the stability of copper-based catalysts for hydrogenation of carbon–oxygen bonds journal January 2018
The selective hydrogenation of furfural over intermetallic compounds with outstanding catalytic performance journal January 2019

Similar Records

Support Induced Control of Surface Composition in Cu–Ni/TiO2 Catalysts Enables High Yield Co-Conversion of HMF and Furfural to Methylated Furans
Journal Article · Sun May 07 20:00:00 EDT 2017 · ACS Catalysis · OSTI ID:1581908

Effects of Cu–Ni Bimetallic Catalyst Composition and Support on Activity, Selectivity, and Stability for Furfural Conversion to 2-Methyfuran
Journal Article · Wed Dec 20 23:00:00 EST 2017 · ACS Sustainable Chemistry & Engineering · OSTI ID:1539619

Effects of Cu–Ni Bimetallic Catalyst Composition and Support on Activity, Selectivity, and Stability for Furfural Conversion to 2-Methyfuran
Journal Article · Mon Dec 04 19:00:00 EST 2017 · ACS Sustainable Chemistry & Engineering · OSTI ID:1581907

Related Subjects