Tribocorrosion and cytotoxicity of FeB-Fe2B layers on AISI 316 L steel

Campos-Silva, I.; Palomar-Pardavé, M.; Pérez Pastén-Borja, R.; Kahvecioglu Feridun, O.; Bravo-Bárcenas, D.; López-García, C.; Reyes-Helguera, R.

doi:10.1016/j.surfcoat.2018.05.085

Tribocorrosion and cytotoxicity of FeB-Fe₂B layers on AISI 316 L steel

Journal Article · Thu Jun 28 00:00:00 EDT 2018 · Surface and Coatings Technology

DOI:https://doi.org/10.1016/j.surfcoat.2018.05.085· OSTI ID:1490239

Campos-Silva, I. ^[1]; Palomar-Pardavé, M. ^[2]; Pérez Pastén-Borja, R. ^[3]; Kahvecioglu Feridun, O. ^[4]; Bravo-Bárcenas, D. ^[2]; López-García, C. ^[5]; Reyes-Helguera, R. ^[1]

Inst. Politécnico Nacional, Grupo Ingeniería de Superficies, Ciudad de México (Mexico)
Univ. Autónoma Metropolitana, Ciudad de México (Mexico)
Inst. Politécnico Nacional, Ciudad de México (Mexico)
Argonne National Lab. (ANL), Argonne, IL (United States)
Tecnológico de Estudios Superiores de Chalco (Mexico)

New results about the tribocorrosion resistance and cytotoxicity of FeB-Fe₂B layer developed by the powder-pack boriding process on the surface of AISI 316 L steel are presented in this work. Initially, the tribocorrosion tests in the borided AISI 316 L steel and the untreated material (AISI 316 L steel) were performed in Hank's solution, using a ball-on-flat configuration, which was connected with a three electrode-chemical cell. The sliding tests, in the presence or absence of corrosion, were performed under 20 N normal force using an alumina ball as a counter body. For the overall experimental conditions, the material loss for each material was estimated according to the ASTM G119 procedure. Further, the in vitro cytocompatibility of FeB-Fe₂B layer on AISI 316 L steel and the untreated material was evaluated by the indirect contact method, in which cell lines of immortalized human fibroblast (CHON-002) and normal renal epithelium of Cercopithecus aethiops (Vero) were used. The results showed that the presence of FeB-Fe₂B layer on the AISI 316 L steel improves the tribocorrosion resistance 1.5 times than that of the untreated material, with a presence of a wear-corrosion degradation mechanism in contrast with a wear-dominated regime for the untreated material. Finally, the cytotoxicity tests revealed satisfactory properties in terms of effects on survival and proliferative activity of human fibroblasts and Vero cells on the surface of the borided AISI 316 L steel.

View Accepted Manuscript (DOE)

Research Organization:: Argonne National Laboratory (ANL), Argonne, IL (United States)

Sponsoring Organization:: Instituto Politécnico Nacional (IPN); USDOE

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 1490239

Journal Information:: Surface and Coatings Technology, Journal Name: Surface and Coatings Technology Journal Issue: C Vol. 349; ISSN 0257-8972

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (22)

Boronizing of 304 steel Rus, J.; Luis De Leal, C.; Tsipas, D. N. Journal of Materials Science Letters, Vol. 4, Issue 5 https://doi.org/10.1007/BF00720032	journal	May 1985
Assessing the Tribocorrosion Performance of Three Different Nickel-Based Superalloys Tekin, K. C.; Malayoglu, U. Tribology Letters, Vol. 37, Issue 3 https://doi.org/10.1007/s11249-009-9552-1	journal	December 2009
Improving the Adhesion Resistance of the Boride Coatings to AISI 316L Steel Substrate by Diffusion Annealing Campos-Silva, I.; Bernabé-Molina, S.; Bravo-Bárcenas, D. Journal of Materials Engineering and Performance, Vol. 25, Issue 9 https://doi.org/10.1007/s11665-016-2201-6	journal	July 2016
Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel Reséndiz-Calderon, C. D.; Rodríguez-Castro, G. A.; Meneses-Amador, A. Journal of Materials Engineering and Performance, Vol. 26, Issue 11 https://doi.org/10.1007/s11665-017-3004-0	journal	October 2017
Corrosion and wear behaviors of boronized AISI 316L stainless steel Kayali, Yusuf; Büyüksaǧiş, Aysel; Yalçin, Yılmaz Metals and Materials International, Vol. 19, Issue 5 https://doi.org/10.1007/s12540-013-5019-x	journal	September 2013
Characterization, Tribological and Mechanical Properties of Plasma Paste Borided AISI 316 Steel Keddam, M.; Chegroune, R.; Kulka, M. Transactions of the Indian Institute of Metals, Vol. 71, Issue 1 https://doi.org/10.1007/s12666-017-1142-6	journal	May 2017
Characterization of borided AISI 316L stainless steel implant Özbek, I.; Konduk, B. A.; Bindal, C. Vacuum, Vol. 65, Issue 3-4 https://doi.org/10.1016/S0042-207X(01)00466-3	journal	May 2002
Corrosion–wear mechanisms of hard coated austenitic 316L stainless steels Dearnley, Peter A.; Aldrich-Smith, Giles Wear, Vol. 256, Issue 5 https://doi.org/10.1016/S0043-1648(03)00559-3	journal	March 2004
Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater Chen, Jun; Zhang, Qing; Li, Quan-an Transactions of Nonferrous Metals Society of China, Vol. 24, Issue 4 https://doi.org/10.1016/S1003-6326(14)63157-5	journal	April 2014
Iron boride-based thermal diffusion coatings for tribo-corrosion oil production applications Medvedovski, Eugene; Jiang, Jiaren; Robertson, Mark Ceramics International, Vol. 42, Issue 2 https://doi.org/10.1016/j.ceramint.2015.10.109	journal	February 2016
Tribocorrosion behaviour of AISI 304 stainless steel in 0.5M NaCl solution Sun, Y.; Rana, Vipul Materials Chemistry and Physics, Vol. 129, Issue 1-2 https://doi.org/10.1016/j.matchemphys.2011.03.063	journal	September 2011
Experimental investigation on corrosion and hardness of ion implanted AISI 316L stainless steel Muthukumaran, V.; Selladurai, V.; Nandhakumar, S. Materials & Design, Vol. 31, Issue 6 https://doi.org/10.1016/j.matdes.2010.01.007	journal	June 2010
Formation and kinetics of FeB/Fe2B layers and diffusion zone at the surface of AISI 316 borided steels Campos-Silva, I.; Ortiz-Domínguez, M.; Bravo-Bárcenas, O. Surface and Coatings Technology, Vol. 205, Issue 2 https://doi.org/10.1016/j.surfcoat.2010.06.068	journal	October 2010
Corrosion behavior of AISI 316L borided and non-borided steels immersed in a simulated body fluid solution Mejía-Caballero, I.; Palomar-Pardavé, M.; Martínez Trinidad, J. Surface and Coatings Technology, Vol. 280 https://doi.org/10.1016/j.surfcoat.2015.08.053	journal	October 2015
Wear resistance improvement of austenitic 316L steel by laser alloying with boron Kulka, M.; Mikolajczak, D.; Makuch, N. Surface and Coatings Technology, Vol. 291 https://doi.org/10.1016/j.surfcoat.2016.02.058	journal	April 2016
Mapping erosion-corrosion of carbon steel in oil exploration conditions: Some new approaches to characterizing mechanisms and synergies Stack, M. M.; Abdulrahman, G. H. Tribology International, Vol. 43, Issue 7 https://doi.org/10.1016/j.triboint.2010.01.005	journal	July 2010
Tribocorrosion behaviour of DLC-coated 316L stainless steel Azzi, M.; Paquette, M.; Szpunar, J. A. Wear, Vol. 267, Issue 5-8 https://doi.org/10.1016/j.wear.2009.02.006	journal	June 2009
Erosion–corrosion behavior and corrosion resistance of AISI 316 stainless steel in flow jet impingement Zhao, Yanlin; Zhou, Fang; Yao, Jun Wear, Vol. 328-329 https://doi.org/10.1016/j.wear.2015.03.017	journal	April 2015
Nickel-free austenitic stainless steels for medical applications Yang, Ke; Ren, Yibin Science and Technology of Advanced Materials, Vol. 11, Issue 1 https://doi.org/10.1088/1468-6996/11/1/014105	journal	February 2010
Wear and corrosion behaviors of duplex surface treated 316L austenitic stainless steel via combination of boriding and chromizing Kheyrodin, Mohamad; Habibolahzadeh, Ali; Mousavi, Sey’yed Babak Protection of Metals and Physical Chemistry of Surfaces, Vol. 53, Issue 1 https://doi.org/10.1134/S2070205117010117	journal	January 2017
Surface Modification Of Implants For Bone Surgery Marciniak, J.; Szewczenko, J.; Kajzer, W. Archives of Metallurgy and Materials, Vol. 60, Issue 3 https://doi.org/10.1515/amm-2015-0357	journal	September 2015
Wear Characteristics of Metallic Biomaterials: A Review Hussein, Mohamed; Mohammed, Abdul; Al-Aqeeli, Naser Materials, Vol. 8, Issue 5 https://doi.org/10.3390/ma8052749	journal	May 2015

Cited By (2)

Pack-boriding of low alloy steel: microstructure evolution and migration behaviour of alloying elements Litoria, A. K.; Figueroa, C. A.; Bim, L. T. Philosophical Magazine, Vol. 100, Issue 3 https://doi.org/10.1080/14786435.2019.1680890	journal	October 2019
Corrosion and tribocorrosion behaviours of AISI 321, AISI 431 and FDMA borided and non-borided steels Chilali, Abderrazak; Salhi, Hichem; Abdi, Abderrazak Materials Research Express, Vol. 6, Issue 11 https://doi.org/10.1088/2053-1591/ab4e4b	journal	September 2019

Similar Records

Tribocorrosion resistance of borided ASTM F1537 alloy

Journal Article · Sun Aug 04 20:00:00 EDT 2019 · Surface and Coatings Technology · OSTI ID:1671801

Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel

Journal Article · Tue Nov 14 23:00:00 EST 2017 · Journal of Materials Engineering and Performance · OSTI ID:22860776

Fracture Toughness of Thick Boride Layers Estimated by the Cross-Sectioned Scratch Test

Journal Article · Wed Feb 14 23:00:00 EST 2018 · Journal of Materials Engineering and Performance · OSTI ID:22860643

Related Subjects

36 MATERIALS SCIENCE
Boride layers
Boriding
Cytotoxicity
Degradation mechanisms
Hank's solution
Tribocorrosion