Tribocorrosion resistance of borided ASTM F1537 alloy

Campos-Silva, I.; Delgado-Brito, A. M.; Oseguera-Peña, J.; Martínez-Trinidad, J.; Kahvecioglu-Feridun, O.; Pasten-Borja, R. Pérez; López-Suero, D.

doi:10.1016/j.surfcoat.2019.06.098

Tribocorrosion resistance of borided ASTM F1537 alloy

Journal Article · Mon Aug 05 00:00:00 EDT 2019 · Surface and Coatings Technology

DOI:https://doi.org/10.1016/j.surfcoat.2019.06.098· OSTI ID:1671801

Campos-Silva, I. ^[1]; Delgado-Brito, A. M. ^[1]; Oseguera-Peña, J. ^[2]; Martínez-Trinidad, J. ^[1]; Kahvecioglu-Feridun, O. ^[3]; Pasten-Borja, R. Pérez ^[1]; López-Suero, D. ^[1]

Instituto Politécnico Nacional, Ciudad de México (Mexico)
Tecnológico de Monterrey, Atizapán de Zaragoza (Mexico)
Argonne National Lab. (ANL), Argonne, IL (United States)

We report new results about the tribocorrosion resistance of borided ASTM F1537 alloy immersed in Hank's solution were obtained in this study. A CoB-Co2B layer, with around 30 mu m of thickness, was obtained at the surface of the cobalt-based alloy using the powder-pack boriding process at 1273 K with 6 h of exposure. The tribocorrosion tests were carried out in the borided ASTM F1537 alloy and the non-borided ASTM F1537 alloy (reference material) using a linear reciprocating tribometer coupled with a standard three-electrode electrochemical cell. A counterpart of alumina (ball of 4.8 mm-diameter) was used, with a constant applied load of 20 N, and a total sliding distance of 100 m. The total material loss rate due to tribocorrosion (T), which included the mass loss rate due to wear (W) and that due to corrosion (C), was estimated according to the ASTM G119 procedure. The results showed that the presence of CoB-Co₂B layer at the surface of the ASTM F1537 alloy increased the tribocorrosion resistance around 1.2 times compared with the reference material. In addition, for the reference material, 55% of the material loss rate was attributed to the wear-corrosion synergism in comparison with 47% estimated for the borided ASTM F1537 alloy. Finally, the influence of wear affected in greater extent than corrosion in the reference material, whilst the corrosion-wear regime was obtained for the borided ASTM F1537

View Accepted Manuscript (DOE)

Research Organization:: Argonne National Laboratory (ANL), Argonne, IL (United States)

Sponsoring Organization:: Instituto Politécnico Nacional (IPN); USDOE

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 1671801

Journal Information:: Surface and Coatings Technology, Journal Name: Surface and Coatings Technology Vol. 375; ISSN 0257-8972

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (26)

Assessing the Tribocorrosion Performance of Three Different Nickel-Based Superalloys Tekin, K. C.; Malayoglu, U. Tribology Letters, Vol. 37, Issue 3 https://doi.org/10.1007/s11249-009-9552-1	journal	December 2009
Tribocorrosion of Pulsed Plasma-Nitrided CoCrMo Implant Alloy Bazzoni, A.; Mischler, S.; Espallargas, N. Tribology Letters, Vol. 49, Issue 1 https://doi.org/10.1007/s11249-012-0047-0	journal	October 2012
Electrochemical Corrosion Behavior of Borided CoCrMo Alloy Immersed in Hanks’ Solution Rosas-Becerra, G.; Mejía-Caballero, I.; Martínez-Trinidad, J. Journal of Materials Engineering and Performance, Vol. 26, Issue 2 https://doi.org/10.1007/s11665-017-2513-1	journal	January 2017
Diffusion Boride Coatings in CoCrMo Alloy and Some Indentation Properties Campos-Silva, I.; Bravo-Bárcenas, D.; Flores-Jiménez, M. Metallography, Microstructure, and Analysis, Vol. 4, Issue 3 https://doi.org/10.1007/s13632-015-0200-x	journal	April 2015
Surface layers on cobalt base alloys by boron diffusion Knotek, O.; Lugscheider, E.; Leuschen, K. Thin Solid Films, Vol. 45, Issue 2 https://doi.org/10.1016/0040-6090(77)90266-8	journal	September 1977
Methods of measuring wear-corrosion synergism Watson, S. Wear, Vol. 181-183 https://doi.org/10.1016/0043-1648(94)07108-X	journal	March 1995
Improving the tribocorrosion resistance of Ti6Al4V surface by laser surface cladding with TiNiZrO 2 composite coating Obadele, Babatunde Abiodun; Andrews, Anthony; Mathew, Mathew T. Applied Surface Science, Vol. 345 https://doi.org/10.1016/j.apsusc.2015.03.152	journal	August 2015
Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application Bose, Sivakumar; Pathak, Lokesh Chandra; Singh, Raghuvir Applied Surface Science, Vol. 433 https://doi.org/10.1016/j.apsusc.2017.09.223	journal	March 2018
Effect of the diffusion annealing process in the indentation properties of cobalt boride layer Delgado-Brito, A. M.; López-Suero, D.; Ruiz-Ríos, A. Ceramics International, Vol. 45, Issue 6 https://doi.org/10.1016/j.ceramint.2019.01.081	journal	April 2019
Tribocorrosion studies of metallic biomaterials: The effect of plasma nitriding and DLC surface modifications Zhao, Guo-Hua; Aune, Ragnhild E.; Espallargas, Nuria Journal of the Mechanical Behavior of Biomedical Materials, Vol. 63 https://doi.org/10.1016/j.jmbbm.2016.06.014	journal	October 2016
Electrochemical evaluation of corrosion and tribocorrosion behaviour of amorphous and nanocrystalline cobalt–tungsten electrodeposited coatings Fathollahzade, N.; Raeissi, K. Materials Chemistry and Physics, Vol. 148, Issue 1-2 https://doi.org/10.1016/j.matchemphys.2014.07.013	journal	November 2014
Effects of boronizing on mechanical and dry-sliding wear properties of CoCrMo alloy Mu, Dong; Shen, Bao-luo; Zhao, Xin Materials & Design, Vol. 31, Issue 8 https://doi.org/10.1016/j.matdes.2010.03.024	journal	September 2010
Growth kinetics and mechanical properties of boride layers formed at the surface of the ASTM F-75 biomedical alloy Campos-Silva, I.; Bravo-Bárcenas, D.; Meneses-Amador, A. Surface and Coatings Technology, Vol. 237 https://doi.org/10.1016/j.surfcoat.2013.06.083	journal	December 2013
Mechanical and dry-sliding wear properties of boronized pure cobalt using boronizing powders with SiC as diluent Mu, Dong; Shen, Bao-luo Surface and Coatings Technology, Vol. 236 https://doi.org/10.1016/j.surfcoat.2013.09.034	journal	December 2013
The boriding process in CoCrMo alloy: Fracture toughness in cobalt boride coatings Campos-Silva, I.; Bravo-Bárcenas, D.; Cimenoglu, H. Surface and Coatings Technology, Vol. 260 https://doi.org/10.1016/j.surfcoat.2014.07.092	journal	December 2014
Micro-abrasive wear resistance of CoB/Co2B coatings formed in CoCrMo alloy Rodríguez-Castro, G. A.; Reséndiz-Calderon, C. D.; Jiménez-Tinoco, L. F. Surface and Coatings Technology, Vol. 284 https://doi.org/10.1016/j.surfcoat.2015.06.081	journal	December 2015
Tribocorrosion and cytotoxicity of FeB-Fe2B layers on AISI 316 L steel Campos-Silva, I.; Palomar-Pardavé, M.; Pérez Pastén-Borja, R. Surface and Coatings Technology, Vol. 349 https://doi.org/10.1016/j.surfcoat.2018.05.085	journal	September 2018
Contact fatigue performance of cobalt boride coatings Meneses-Amador, A.; Sandoval-Juárez, D.; Rodríguez-Castro, G. A. Surface and Coatings Technology, Vol. 353 https://doi.org/10.1016/j.surfcoat.2018.07.104	journal	November 2018
Triboelectrochemical techniques and interpretation methods in tribocorrosion: A comparative evaluation Mischler, S. Tribology International, Vol. 41, Issue 7 https://doi.org/10.1016/j.triboint.2007.11.003	journal	July 2008
Mapping erosion-corrosion of carbon steel in oil exploration conditions: Some new approaches to characterizing mechanisms and synergies Stack, M. M.; Abdulrahman, G. H. Tribology International, Vol. 43, Issue 7 https://doi.org/10.1016/j.triboint.2010.01.005	journal	July 2010
Tribocorrosion behavior of DLC-coated CoCrMo alloy in simulated biological environment Liu, Jia; Wang, Xue; Wu, B. J. Vacuum, Vol. 92 https://doi.org/10.1016/j.vacuum.2012.11.017	journal	June 2013
Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments Yan, Yu; Neville, Anne; Dowson, Duncan Wear, Vol. 263, Issue 7-12 https://doi.org/10.1016/j.wear.2007.01.114	journal	September 2007
Tribocorrosion behavior of CoCrMo alloy for hip prosthesis as a function of loads: A comparison between two testing systems Mathew, M. T.; Runa, M. J.; Laurent, M. Wear, Vol. 271, Issue 9-10 https://doi.org/10.1016/j.wear.2011.01.086	journal	July 2011
Tribological behavior of borided surface on CoCrMo cast alloy Cuao-Moreu, C. A.; Hernández-Sanchéz, E.; Alvarez-Vera, M. Wear, Vol. 426-427 https://doi.org/10.1016/j.wear.2019.02.006	journal	April 2019
Characterisation of CoB–Co ₂ B coatings by the scratch test Bravo-Bárcenas, D.; Campos-Silva, I.; Cimenoglu, H. Surface Engineering, Vol. 32, Issue 8 https://doi.org/10.1080/02670844.2015.1121315	journal	February 2016
Effect of Powder Particle Size on the Mechanical Properties of Boronized EN H320 LA Steel Sheets ^\|^Ccedil;alik, Adnan ISIJ International, Vol. 53, Issue 1 https://doi.org/10.2355/isijinternational.53.160	journal	January 2013

Similar Records

Dry sliding wear resistance of cobalt boride coatings formed on ASTM F1537 alloy

Journal Article · Mon Apr 01 00:00:00 EDT 2019 · Journal of Materials Engineering and Performance · OSTI ID:1530878

Dry Sliding Wear Resistance of Cobalt Boride Coatings Formed on ASTM F1537 Alloy

Journal Article · Mon Apr 01 00:00:00 EDT 2019 · Journal of Materials Engineering and Performance · OSTI ID:22970826

Improving the Tribocorrosion Resistance of Monel 400 Alloy by Aluminizing Surface Modification

Journal Article · Sun Jul 15 00:00:00 EDT 2018 · Journal of Materials Engineering and Performance · OSTI ID:22860381

Related Subjects

36 MATERIALS SCIENCE
ASTM F1537 alloy
Boriding
Cobalt boride layers
Failure mechanisms
Hank's solution
tribocorrosion

Tribocorrosion resistance of borided ASTM F1537 alloy

Citation Formats

References (26)

Similar Records

Related Subjects