Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Effect of overcharge on Li(Ni0.5Mn0.3Co0.2)O2/Graphite lithium ion cells with poly(vinylidene fluoride) binder. I - Microstructural changes in the anode

Journal Article · · Journal of Power Sources
 [1];  [1];  [2];  [2];  [2];  [3];  [3];  [3];  [3];  [3];  [1]
  1. Argonne National Lab. (ANL), Argonne, IL (United States). Chemical Sciences and Engineering Division
  2. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division
  3. Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Power Sources Technology Group
+ Show Author Affiliations
Cells based on NMC/graphite, containing poly(vinylidene difluoride) (PVDF) binders in the positive and negative electrodes, were systematically overcharged to 100, 120, 140, 160, 180, and 250% state-of-charge (SOC). At 250% SOC the cell vented. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) of the anodes showed several state-of-overcharge-dependent trends. Starting at 120% SOC, dendrites appeared and increased in concentration as the SOC increased. Dendrite morphology appeared to be dependent on whether the active material was on the “dull” or “shiny” side of the copper collector. Significantly more delamination of the active material from the collector was seen on the “shiny” side of the collector particularly at 180 and 250% SOC. Transition metals were detected at 120% SOC and increased in concentration as the SOC increased. Finally, there was considerable spatial heterogeneity in the microstructures across each laminate with several regions displaying complex layered structures.
Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE National Nuclear Security Administration (NNSA); USDOE Office of Energy Efficiency and Renewable Energy (EERE); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V)
Grant/Contract Number:
AC02-06CH11357; AC05-00OR22725; NA0003525
OSTI ID:
1439931
Alternate ID(s):
OSTI ID: 1548542
OSTI ID: 1460965
Journal Information:
Journal of Power Sources, Journal Name: Journal of Power Sources Journal Issue: C Vol. 385; ISSN 0378-7753
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (31)

Failure Mechanism for Fast-Charged Lithium Metal Batteries with Liquid Electrolytes journal September 2014
N -Substituted Phenothiazine Derivatives: How the Stability of the Neutral and Radical Cation Forms Affects Overcharge Performance in Lithium-Ion Batteries journal December 2014
Failure mechanism of Li-ion battery at overcharge conditions journal November 2007
Improvement of overcharge performance using Li4Ti5O12 as negative electrode for LiFePO4 power battery journal February 2011
Vacuum-tight sample transfer stage for a scanning electron microscopic study of stabilized lithium metal particles journal October 2011
A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions journal June 2002
Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries journal August 2000
A morphological study of SEI film on graphite electrodes journal July 2001
Abuse behavior of high-power, lithium-ion cells journal January 2003
In situ Scanning Electron Microscopy (SEM) observation of interfaces within plastic lithium batteries journal November 1998
The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling journal August 2016
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries journal September 2010
Overcharge failure investigation of lithium-ion batteries journal October 2015
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries journal July 2013
Thermal and overcharge abuse analysis of a redox shuttle for overcharge protection of LiFePO 4 journal February 2014
Mechanisms of dendritic growth investigated by in situ light microscopy during electrodeposition and dissolution of lithium journal September 2014
Cathodes with intrinsic redox overcharge protection: A new strategy towards safer Li-ion batteries journal October 2014
Overcharge-induced capacity fading analysis for large format lithium-ion batteries with Li Ni1/3Co1/3Mn1/3O2+ Li Mn2O4 composite cathode journal April 2015
A stable lithium metal interface journal July 2014
Thermal runaway of commercial 18650 Li-ion batteries with LFP and NCA cathodes – impact of state of charge and overcharge journal January 2015
Abuse Testing of Lithium-Ion Batteries: Characterization of the Overcharge Reaction of LiCoO[sub 2]/Graphite Cells journal January 2001
Contribution of the Structural Changes of LiNi[sub 0.8]Co[sub 0.15]Al[sub 0.05]O[sub 2] Cathodes on the Exothermic Reactions in Li-Ion Cells journal January 2006
Failure Investigation of LiFePO 4 Cells under Overcharge Conditions journal January 2012
Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells journal January 2014
In Situ Solid State 7 Li NMR Observations of Lithium Metal Deposition during Overcharge in Lithium Ion Batteries journal January 2015
Failure Study of Commercial LiFePO 4 Cells in Overcharge Conditions Using Electrochemical Impedance Spectroscopy journal January 2015
Overcharge Study in Li 4 Ti 5 O 12 Based Lithium-Ion Pouch Cell: I. Quantitative Diagnosis of Degradation Modes journal January 2015
Studying the Charging Process of a Lithium-Ion Battery toward 10 V by In Situ X-ray Absorption and Diffraction: Lithium Insertion/Extraction with Side Reactions at Positive and Negative Electrodes journal January 2016
Overcharge Effect on Morphology and Structure of Carbon Electrodes for Lithium-Ion Batteries journal January 2012
A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions journal September 2012
Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance journal January 2016

Cited By (2)

Experimental investigation on the essential cause of the degrading performances for an overcharging ternary battery journal December 2019
Overcharge Cycling Effect on the Surface Layers and Crystalline Structure of LiFePO4 Cathodes of Li-Ion Batteries journal December 2019

Figures / Tables (10)

Fig. 1.(p. 3)figure Fig. 1.
Fig. 2.(p. 4)figure Fig. 2.
Fig. 3.(p. 4)figure Fig. 3.
Fig. 4.(p. 4)figure Fig. 4.
Fig. 5.(p. 5)figure Fig. 5.
Fig. 6.(p. 5)figure Fig. 6.
Fig. 7.(p. 6)figure Fig. 7.
Fig. 10.(p. 7)figure Fig. 10.
Fig. 8.(p. 7)figure Fig. 8.
Fig. 9.(p. 7)figure Fig. 9.

Similar Records

Effect of overcharge on Li(Ni0.5Mn0.3Co0.2)O2 cathodes: NMP-soluble binder. II — Chemical changes in the anode
Journal Article · Mon Feb 12 19:00:00 EST 2018 · Journal of Power Sources · OSTI ID:1437886

Related Subjects

25 ENERGY STORAGE
Anode
Lithium-ion battery
Microstructure
Overcharge
SEI
Scanning electron microscopy
anode
microstructure
overcharge
scanning electron microscopy